S.M.A.R.T. Service Screen
1 minute read.Last Modified 2023-11-30 10:15 EST
The Services > S.M.A.R.T. screen displays settings to configure when S.M.A.R.T. tests run and when to trigger alert warnings and send emails.
|Check Interval||Enter the time in minutes for smartd to wake up and check if any tests are configured to run.|
|Power Mode||Select the power mode from the dropdown list. Options are Never, Sleep, Standby or Idle. S.M.A.R.T. only tests when the Power Mode is Never.|
|Difference||Enter a number of degrees in Celsius. S.M.A.R.T. reports if a drive temperature changes by N degrees Celsius since the last report.|
|Informational||Enter a threshold temperature in Celsius. S.M.A.R.T. sends a message with a LOG_INFO log level if the temperature is above the threshold.|
|Critical||Enter a threshold temperature in Celsius. S.M.A.R.T. sends a message with a LOG_CRIT log level and send an email if the temperature is above the threshold.|
Click Save after changing any settings.