TrueNAS SCALETrueNAS SCALE Nightly Development Documentation
This content follows experimental early release software. Use the Product and Version selectors above to view content specific to a stable software release.

Adding Network Settings

Use the Global Configuration Settings screen to add general network settings like the default gateway and DNS name servers to allow external communication.

To add new or change existing network interfaces see Managing Interfaces.

Disruptive Change

You can lose your TrueNAS connection if you change the network interface that the web interface uses! You might need command line knowledge or physical access to the TrueNAS system to fix misconfigured network settings.

Adding Network Settings

Go to Network and click Settings on the Global Configuration widget to open the Edit Global Configuration screen, then:

  1. Enter the host name for your TrueNAS in Hostname. For example, host.

  2. Enter the system domain name in Domain. For example,

  3. Enter the IP addresses for your DNS name servers in the Nameserver 1, Nameserver 2, and/or Nameserver 3 fields. For home users, enter in the Nameserver 1 field so your TrueNAS SCALE can communicate externally with the Internet.

  4. Enter the IP address for your default gateway into the IPv4 Default Gateway if you are using IPv4 IP addresses. Enter the IP address in the IPv6 Default Gateway if you are using IPv6 addresses.

  5. Select the Outbound Network radio button for outbound service capability.

    Select Allow All to permit all TrueNAS SCALE services that need external communication to do that or select Deny All to prevent that external communication. Select Allow Specific and then use the dropdown list to pick the services you want to allow to communicate externally.

    Click on as many services for which you want to permit external communications. Unchecked services cannot communicate externally.

  6. Click Save. The Global Configuration widget on the Network screen updates to show the new settings.