Script started on Thu Mar 24 16:24:05 2022 Command: ./nextcloud-jail.sh JAIL_INTERFACES not set, defaulting to: vnet0:bridge0 Default mac_prefix specified in defaults.json '0cc47a' is invalid. Using '0ec47a' mac prefix instead. nextcloud_23 successfully created! Testing Host DNS response to pkg.freebsd.org Testing nextcloud_23's SRV response to pkg.freebsd.org Testing nextcloud_23's DNSSEC response to pkg.freebsd.org Installing pkg... You may need to manually remove /usr/local/etc/pkg.conf if it is no longer needed. Installing supplied packages: - nano... - sudo... - vim... ===== Message from python38-3.8.12_1: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py38-gdbm databases/py-gdbm@py38 py38-sqlite3 databases/py-sqlite3@py38 py38-tkinter x11-toolkits/py-tkinter@py38 - redis... ===> Creating groups. Creating group 'redis' with gid '535'. ===> Creating users Creating user 'redis' with uid '535'. ===== Message from redis-6.2.6: -- To setup "redis" you need to edit the configuration file: /usr/local/etc/redis.conf To run redis from startup, add redis_enable="YES" in your /etc/rc.conf. - gnupg... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. No schema files found: doing nothing. ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from ca_root_nss-3.71: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem ===== Message from trousers-0.3.14_3: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account ===== Message from gnupg-2.3.3_2: -- When run on hosts without IPv6 connectivity, GnuPG may fail to connect to dual-stack hkp servers [1]. As a workaround, add: disable-ipv6 to: /usr/local/etc/dirmngr.conf [1] https://dev.gnupg.org/rGecfc4db3a2f8bc2652ba4ac4de5ca1cd13bfcbec - bash... - go... - git... ===> Creating groups. Creating group 'git_daemon' with gid '964'. ===> Creating users Creating user 'git_daemon' with uid '964'. ===== Message from git-2.34.1: -- If you installed the GITWEB option please follow these instructions: In the directory /usr/local/share/examples/git/gitweb you can find all files to make gitweb work as a public repository on the web. All you have to do to make gitweb work is: 1) Please be sure you're able to execute CGI scripts in /usr/local/share/examples/git/gitweb. 2) Set the GITWEB_CONFIG variable in your webserver's config to /usr/local/etc/git/gitweb.conf. This variable is passed to gitweb.cgi. 3) Restart server. If you installed the CONTRIB option please note that the scripts are installed in /usr/local/share/git-core/contrib. Some of them require other ports to be installed (perl, python, etc), which you may need to install manually. - ffmpeg... Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded ===== Message from freetype2-2.11.1: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/index.html, if documentation was installed). ===== Message from wayland-1.20.0: -- Wayland requires XDG_RUNTIME_DIR to be defined to a path that will contain "wayland-%d" unix(4) sockets. This is usually handled by consolekit2 (via ck-launch-session) or pam_xdg (via login). ===== Message from argp-standalone-1.3_4: -- ===> NOTICE: The argp-standalone port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing - perl5... The most recent versions of packages are already installed - p5-Locale-gettext... - help2man... - texinfo... - m4... - autoconf... - php80... - php80-ctype... ===== Message from php80-ctype-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-ctype.ini - php80-curl... ===== Message from php80-curl-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-curl.ini - php80-dom... ===== Message from php80-dom-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-dom.ini - php80-filter... ===== Message from php80-filter-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-filter.ini - php80-gd... ===== Message from php80-gd-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-gd.ini - php80-xml... ===== Message from php80-xml-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-xml.ini - php80-mbstring... ===== Message from php80-mbstring-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-mbstring.ini - php80-openssl... ===== Message from php80-openssl-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-openssl.ini - php80-posix... ===== Message from php80-posix-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-posix.ini - php80-session... ===== Message from php80-session-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-18-session.ini - php80-simplexml... ===== Message from php80-simplexml-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-simplexml.ini - php80-xmlreader... ===== Message from php80-xmlreader-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-xmlreader.ini - php80-xmlwriter... ===== Message from php80-xmlwriter-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-xmlwriter.ini - php80-zip... ===== Message from php80-zip-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-zip.ini - php80-zlib... ===== Message from php80-zlib-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-zlib.ini - php80-fileinfo... ===== Message from php80-fileinfo-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-fileinfo.ini - php80-bz2... ===== Message from php80-bz2-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-bz2.ini - php80-intl... ===== Message from php80-intl-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-intl.ini - php80-ldap... *** Added group `cyrus' (id 60) *** Added user `cyrus' (id 60) ===== Message from cyrus-sasl-2.1.28: -- You can use sasldb2 for authentication, to add users use: saslpasswd2 -c username If you want to enable SMTP AUTH with the system Sendmail, read Sendmail.README NOTE: This port has been compiled with a default pwcheck_method of auxprop. If you want to authenticate your user by /etc/passwd, PAM or LDAP, install ports/security/cyrus-sasl2-saslauthd and set sasl_pwcheck_method to saslauthd after installing the Cyrus-IMAPd 2.X port. You should also check the /usr/local/lib/sasl2/*.conf files for the correct pwcheck_method. If you want to use GSSAPI mechanism, install ports/security/cyrus-sasl2-gssapi. If you want to use SRP mechanism, install ports/security/cyrus-sasl2-srp. If you want to use LDAP auxprop plugin, install ports/security/cyrus-sasl2-ldapdb. ===== Message from openldap24-client-2.4.59_4: -- The OpenLDAP client package has been successfully installed. Edit /usr/local/etc/openldap/ldap.conf to change the system-wide client defaults. Try `man ldap.conf' and visit the OpenLDAP FAQ-O-Matic at http://www.OpenLDAP.org/faq/index.cgi?file=3 for more information. ===== Message from php80-ldap-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-ldap.ini - php80-pecl-smbclient... ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. ===== Message from libinotify-20180201_2: -- Libinotify functionality on FreeBSD is missing support for - detecting a file being moved into or out of a directory within the same filesystem - certain modifications to a symbolic link (rather than the file it points to.) in addition to the known limitations on all platforms using kqueue(2) where various open and close notifications are unimplemented. This means the following regression tests will fail: Directory notifications: IN_MOVED_FROM IN_MOVED_TO Open/close notifications: IN_OPEN IN_CLOSE_NOWRITE IN_CLOSE_WRITE Symbolic Link notifications: IN_DONT_FOLLOW IN_ATTRIB IN_MOVE_SELF IN_DELETE_SELF Kernel patches to address the missing directory and symbolic link notifications are available from: https://github.com/libinotify-kqueue/libinotify-kqueue/tree/master/patches You might want to consider increasing the kern.maxfiles tunable if you plan to use this library for applications that need to monitor activity of a lot of files. ===== Message from gamin-0.1.10_10: -- Gamin will only provide realtime notification of changes for at most n files, where n is the minimum value between (kern.maxfiles * 0.7) and (kern.maxfilesperproc - 200). Beyond that limit, files will be polled. If you often open several large folders with Nautilus, you might want to increase the kern.maxfiles tunable (you do not need to set kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles). The behavior of gamin can be controlled via the various gaminrc files. See http://www.gnome.org/~veillard/gamin/config.html on how to create these files. In particular, if you find gam_server is taking up too much CPU time polling for changes, something like the following may help in one of the gaminrc files: # reduce polling frequency to once per 10 seconds # for UFS file systems in order to lower CPU load fsset ufs poll 10 -- ===> NOTICE: The gamin port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing ===== Message from samba412-4.12.15_3: -- How to start: http://wiki.samba.org/index.php/Samba4/HOWTO * Your configuration is: /usr/local/etc/smb4.conf * All the relevant databases are under: /var/db/samba4 * All the logs are under: /var/log/samba4 * Provisioning script is: /usr/local/bin/samba-tool For additional documentation check: http://wiki.samba.org/index.php/Samba4 Bug reports should go to the: https://bugzilla.samba.org/ ===== Message from php80-pecl-smbclient-1.0.6: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-smbclient.ini - php80-ftp... ===== Message from php80-ftp-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-ftp.ini - php80-imap... ===== Message from panda-cclient-20130621_1: -- Warning: You have chosen to include SSL support. Applications/ports that use the cclient library but do not support SSL may stop working or have problems linking. Linking them explicitly with ssl (-lssl -lcrypto) may or may not help. ===== Message from php80-imap-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-imap.ini - php80-bcmath... ===== Message from php80-bcmath-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-bcmath.ini - php80-gmp... ===== Message from php80-gmp-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-gmp.ini - php80-exif... ===== Message from php80-exif-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-exif.ini - php80-pecl-APCu... ===== Message from php80-pecl-APCu-5.1.21: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-apcu.ini - php80-pecl-memcache... ===== Message from php80-pecl-memcache-8.0: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-memcache.ini - php80-pecl-redis... ===== Message from php80-pecl-redis-5.3.5: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-redis.ini - php80-pecl-imagick... ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. ===== Message from ghostscript9-agpl-base-9.52_20: -- This package installs a script named dvipdf that depends on dvips. If you want to use this script you need to install print/tex-dvipsk. ===== Message from libwmf-nox11-0.2.12: -- ===> NOTICE: The libwmf-nox11 port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://docs.freebsd.org/en/articles/contributing/#ports-contributing ===== Message from liblqr-1-0.4.2: -- NOTE: In order to compile examples for liblqr, you will also need pngwriter port (/usr/ports/graphics/pngwriter). Examples are located in /usr/local/share/examples/liblqr-1 ===== Message from php80-pecl-imagick-3.5.1: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-imagick.ini - php80-pcntl... ===== Message from php80-pcntl-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-pcntl.ini - php80-phar... ===== Message from php80-phar-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-phar.ini - php80-iconv... ===== Message from php80-iconv-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-iconv.ini - php80-xsl... ===== Message from php80-xsl-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-xsl.ini - php80-opcache... ===== Message from php80-opcache-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-10-opcache.ini No default gateway found for ipv6. * Starting nextcloud_23 + Started OK + Using devfs_ruleset: 1008 (iocage generated default) + Configuring VNET OK + Using IP options: vnet + Starting services OK + Executing poststart OK Successfully added mount to nextcloud_23's fstab Successfully added mount to nextcloud_23's fstab Successfully added mount to nextcloud_23's fstab Successfully added mount to nextcloud_23's fstab Successfully added mount to nextcloud_23's fstab ===> Creating groups. Creating group 'mysql' with gid '88'. ===> Creating users Creating user 'mysql' with uid '88'. ===> Creating homedir(s) ===== Message from boost-libs-1.72.0_6: -- You have built the Boost library with thread support. Don't forget to add -pthread to your linker options when linking your code. ===== Message from mariadb103-client-10.3.34: -- MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for my.cnf. Please move existing my.cnf files from those paths to /usr/local/etc and /usr/local/etc/mysql. ===== Message from galera-25.3.35: -- Find the Galera Cluster documentation at http://galeracluster.com/documentation-webpages/ ===== Message from php80-pdo-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-pdo.ini ===== Message from mariadb103-server-10.3.34: -- MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for my.cnf. Please move existing my.cnf files from those paths to /usr/local/etc and /usr/local/etc/mysql. This port does NOT include the mytop perl script, this is included in the MariaDB tarball but the most recent version can be found in the databases/mytop port ===== Message from php80-pdo_mysql-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-pdo_mysql.ini ===== Message from php80-mysqli-8.0.15: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-mysqli.ini go: downloading github.com/caddyserver/xcaddy v0.2.1 go: downloading github.com/Masterminds/semver/v3 v3.1.1 2022/03/24 16:31:42 [INFO] Temporary folder: /tmp/buildenv_2022-03-24-1631.3438242318 2022/03/24 16:31:42 [INFO] Writing main module: /tmp/buildenv_2022-03-24-1631.3438242318/main.go 2022/03/24 16:31:42 [INFO] Initializing Go module 2022/03/24 16:31:42 [INFO] exec (timeout=10s): /usr/local/bin/go mod init caddy go: creating new go.mod: module caddy go: to add module requirements and sums: go mod tidy 2022/03/24 16:31:42 [INFO] Pinning versions 2022/03/24 16:31:42 [INFO] exec (timeout=0s): /usr/local/bin/go get -d -v github.com/caddyserver/caddy/v2 go: downloading github.com/caddyserver/caddy v1.0.5 go: downloading github.com/caddyserver/caddy/v2 v2.4.6 go: downloading github.com/caddyserver/certmagic v0.15.2 go: downloading github.com/google/uuid v1.3.0 go: downloading github.com/prometheus/client_golang v1.11.0 go: downloading go.uber.org/zap v1.19.0 go: downloading golang.org/x/term v0.0.0-20210503060354-a79de5458b56 go: downloading github.com/klauspost/cpuid/v2 v2.0.9 go: downloading github.com/libdns/libdns v0.2.1 go: downloading github.com/mholt/acmez v1.0.1 go: downloading github.com/miekg/dns v1.1.43 go: downloading golang.org/x/crypto v0.0.0-20210915214749-c084706c2272 go: downloading golang.org/x/net v0.0.0-20210913180222-943fd674d43e go: downloading golang.org/x/sys v0.0.0-20210915083310-ed5796bab164 go: downloading github.com/beorn7/perks v1.0.1 go: downloading github.com/cespare/xxhash/v2 v2.1.1 go: downloading github.com/golang/protobuf v1.5.2 go: downloading github.com/cespare/xxhash v1.1.0 go: downloading github.com/prometheus/client_model v0.2.0 go: downloading github.com/prometheus/common v0.26.0 go: downloading github.com/prometheus/procfs v0.6.0 go: downloading go.uber.org/atomic v1.7.0 go: downloading go.uber.org/multierr v1.6.0 go: downloading google.golang.org/protobuf v1.27.1 go: downloading github.com/matttproud/golang_protobuf_extensions v1.0.1 go: downloading golang.org/x/text v0.3.7 go get: added github.com/beorn7/perks v1.0.1 go get: added github.com/caddyserver/caddy/v2 v2.4.6 go get: added github.com/caddyserver/certmagic v0.15.2 go get: added github.com/cespare/xxhash/v2 v2.1.1 go get: added github.com/golang/protobuf v1.5.2 go get: added github.com/google/uuid v1.3.0 go get: added github.com/klauspost/cpuid/v2 v2.0.9 go get: added github.com/libdns/libdns v0.2.1 go get: added github.com/matttproud/golang_protobuf_extensions v1.0.1 go get: added github.com/mholt/acmez v1.0.1 go get: added github.com/miekg/dns v1.1.43 go get: added github.com/prometheus/client_golang v1.11.0 go get: added github.com/prometheus/client_model v0.2.0 go get: added github.com/prometheus/common v0.26.0 go get: added github.com/prometheus/procfs v0.6.0 go get: added go.uber.org/atomic v1.7.0 go get: added go.uber.org/multierr v1.6.0 go get: added go.uber.org/zap v1.19.0 go get: added golang.org/x/crypto v0.0.0-20210915214749-c084706c2272 go get: added golang.org/x/net v0.0.0-20210913180222-943fd674d43e go get: added golang.org/x/sys v0.0.0-20210915083310-ed5796bab164 go get: added golang.org/x/term v0.0.0-20210503060354-a79de5458b56 go get: added golang.org/x/text v0.3.7 go get: added google.golang.org/protobuf v1.27.1 2022/03/24 16:32:08 [INFO] Build environment ready 2022/03/24 16:32:08 [INFO] Building Caddy 2022/03/24 16:32:08 [INFO] exec (timeout=0s): /usr/local/bin/go mod tidy go: downloading github.com/go-chi/chi v4.1.2+incompatible go: downloading github.com/smallstep/certificates v0.17.5-0.20211008195551-04fe3126bebf go: downloading github.com/smallstep/nosql v0.3.8 go: downloading github.com/dustin/go-humanize v1.0.1-0.20200219035652-afde56e7acac go: downloading gopkg.in/natefinch/lumberjack.v2 v2.0.0 go: downloading github.com/smallstep/cli v0.17.6 go: downloading github.com/smallstep/truststore v0.9.6 go: downloading github.com/klauspost/compress v1.13.6 go: downloading github.com/Masterminds/sprig/v3 v3.2.2 go: downloading github.com/alecthomas/chroma v0.9.2 go: downloading github.com/naoina/toml v0.1.1 go: downloading github.com/yuin/goldmark v1.4.1 go: downloading github.com/yuin/goldmark-highlighting v0.0.0-20210516132338-9216f9c5aa01 go: downloading github.com/Masterminds/sprig v2.22.0+incompatible go: downloading gopkg.in/yaml.v2 v2.4.0 go: downloading github.com/google/cel-go v0.7.3 go: downloading github.com/lucas-clemente/quic-go v0.23.0 go: downloading google.golang.org/genproto v0.0.0-20210719143636-1d5a45f8e492 go: downloading github.com/pkg/errors v0.9.1 go: downloading github.com/stretchr/testify v1.7.0 go: downloading go.uber.org/goleak v1.1.10 go: downloading github.com/smallstep/assert v0.0.0-20200723003110-82e2b9b3b262 go: downloading github.com/benbjohnson/clock v1.1.0 go: downloading github.com/BurntSushi/toml v0.3.1 go: downloading howett.net/plist v0.0.0-20181124034731-591f970eefbb go: downloading go.step.sm/crypto v0.11.0 go: downloading go.step.sm/cli-utils v0.6.0 go: downloading go.step.sm/linkedca v0.5.0 go: downloading google.golang.org/grpc v1.39.0 go: downloading gopkg.in/square/go-jose.v2 v2.6.0 go: downloading github.com/naoina/go-stringutil v0.1.0 go: downloading github.com/kylelemons/godebug v1.1.0 go: downloading golang.org/x/sync v0.0.0-20210220032951-036812b2e83c go: downloading github.com/Masterminds/goutils v1.1.1 go: downloading github.com/Masterminds/semver v1.5.0 go: downloading github.com/huandu/xstrings v1.3.2 go: downloading github.com/imdario/mergo v0.3.12 go: downloading github.com/mitchellh/copystructure v1.2.0 go: downloading github.com/shopspring/decimal v1.2.0 go: downloading github.com/spf13/cast v1.4.1 go: downloading github.com/alecthomas/assert v0.0.0-20170929043011-405dbfeb8e38 go: downloading gopkg.in/check.v1 v1.0.0-20190902080502-41f04d3bba15 go: downloading github.com/stoewer/go-strcase v1.2.0 go: downloading github.com/google/go-cmp v0.5.6 go: downloading github.com/dgraph-io/badger v1.6.2 go: downloading github.com/dgraph-io/badger/v2 v2.2007.4 go: downloading go.etcd.io/bbolt v1.3.6 go: downloading github.com/go-sql-driver/mysql v1.6.0 go: downloading golang.org/x/lint v0.0.0-20210508222113-6edffad5e616 go: downloading github.com/marten-seemann/qpack v0.2.1 go: downloading github.com/golang/mock v1.6.0 go: downloading github.com/onsi/ginkgo v1.16.4 go: downloading github.com/onsi/gomega v1.13.0 go: downloading github.com/urfave/cli v1.22.5 go: downloading github.com/rs/xid v1.2.1 go: downloading github.com/sirupsen/logrus v1.7.0 go: downloading github.com/davecgh/go-spew v1.1.1 go: downloading github.com/pmezard/go-difflib v1.0.0 go: downloading gopkg.in/yaml.v3 v3.0.0-20210107192922-496545a6307b go: downloading github.com/micromdm/scep/v2 v2.1.0 go: downloading go.mozilla.org/pkcs7 v0.0.0-20210826202110-33d05740a352 go: downloading github.com/dlclark/regexp2 v1.4.0 go: downloading github.com/chzyer/readline v0.0.0-20180603132655-2972be24d48e go: downloading github.com/manifoldco/promptui v0.8.0 go: downloading github.com/mitchellh/reflectwalk v1.0.2 go: downloading github.com/antlr/antlr4 v0.0.0-20200503195918-621b933c7a7f go: downloading github.com/kr/pretty v0.2.1 go: downloading github.com/alecthomas/colour v0.0.0-20160524082231-60882d9e2721 go: downloading github.com/alecthomas/repr v0.0.0-20180818092828-117648cd9897 go: downloading github.com/sergi/go-diff v1.2.0 go: downloading github.com/cheekybits/genny v1.0.0 go: downloading github.com/marten-seemann/qtls-go1-16 v0.1.4 go: downloading github.com/marten-seemann/qtls-go1-17 v0.1.0 go: downloading github.com/dgraph-io/ristretto v0.0.4-0.20200906165740-41ebdbffecfd go: downloading github.com/dgryski/go-farm v0.0.0-20200201041132-a6ae2369ad13 go: downloading github.com/cpuguy83/go-md2man/v2 v2.0.0 go: downloading github.com/aws/aws-sdk-go v1.37.0 go: downloading cloud.google.com/go v0.83.0 go: downloading github.com/googleapis/gax-go/v2 v2.0.5 go: downloading github.com/cpuguy83/go-md2man v1.0.10 go: downloading github.com/googleapis/gax-go v2.0.2+incompatible go: downloading google.golang.org/api v0.48.0 go: downloading golang.org/x/xerrors v0.0.0-20200804184101-5ec99f83aff1 go: downloading github.com/danwakefield/fnmatch v0.0.0-20160403171240-cbb64ac3d964 go: downloading github.com/go-kit/kit v0.10.0 go: downloading github.com/juju/ansiterm v0.0.0-20180109212912-720a0952cc2a go: downloading github.com/chzyer/test v0.0.0-20180213035817-a1ea475d72b1 go: downloading github.com/mattn/go-isatty v0.0.13 go: downloading github.com/kr/text v0.2.0 go: downloading github.com/go-task/slim-sprig v0.0.0-20210107165309-348f09dbbbc0 go: downloading github.com/AndreasBriese/bbloom v0.0.0-20190825152654-46b345b51c96 go: downloading github.com/golang/snappy v0.0.3 go: downloading github.com/samfoo/ansi v0.0.0-20160124022901-b6bd2ded7189 go: downloading golang.org/x/tools v0.1.5 go: downloading github.com/russross/blackfriday/v2 v2.0.1 go: downloading github.com/russross/blackfriday v1.5.2 go: downloading github.com/nxadm/tail v1.4.8 go: downloading github.com/go-logfmt/logfmt v0.5.0 go: downloading github.com/go-stack/stack v1.8.0 go: downloading github.com/chzyer/logex v1.1.10 go: downloading github.com/mattn/go-colorable v0.1.8 go: downloading github.com/OneOfOne/xxhash v1.2.2 go: downloading github.com/spaolacci/murmur3 v1.1.0 go: downloading github.com/shurcooL/sanitized_anchor_name v1.0.0 go: downloading github.com/mgutz/ansi v0.0.0-20200706080929-d51e80ef957d go: downloading gopkg.in/tomb.v1 v1.0.0-20141024135613-dd632973f1e7 go: downloading github.com/lunixbochs/vtclean v1.0.0 go: downloading github.com/fsnotify/fsnotify v1.4.9 go: downloading github.com/jmespath/go-jmespath v0.4.0 go: downloading golang.org/x/mod v0.4.2 go: downloading golang.org/x/oauth2 v0.0.0-20210514164344-f6687ab2804c go: downloading google.golang.org/appengine v1.6.7 go: downloading go.opencensus.io v0.23.0 go: downloading github.com/golang/groupcache v0.0.0-20210331224755-41bb18bfe9da 2022/03/24 16:32:22 [INFO] exec (timeout=0s): /usr/local/bin/go build -o /usr/local/bin/caddy -ldflags -w -s -trimpath 2022/03/24 16:33:01 [INFO] Build complete: /usr/local/bin/caddy 2022/03/24 16:33:01 [INFO] Cleaning up temporary folder: /tmp/buildenv_2022-03-24-1631.3438242318 /tmp/latest-23.tar.bz2 0% of 133 MB 0 Bps /tmp/latest-23.tar.bz2 0% of 133 MB 1807 kBps /tmp/latest-23.tar.bz2 5% of 133 MB 7278 kBps /tmp/latest-23.tar.bz2 16% of 133 MB 15 MBps 14s /tmp/latest-23.tar.bz2 34% of 133 MB 23 MBps 07s /tmp/latest-23.tar.bz2 56% of 133 MB 30 MBps 03s /tmp/latest-23.tar.bz2 83% of 133 MB 35 MBps 01s /tmp/latest-23.tar.bz2 133 MB 22 MBps 06s /tmp/latest-23.tar.bz2.asc 0% of 833 B 0 Bps /tmp/latest-23.tar.bz2.asc 833 B 15 MBps 00s /tmp/nextcloud.asc 0% of 3100 B 0 Bps /tmp/nextcloud.asc 3100 B 41 MBps 00s gpg: Warning: using insecure memory! gpg: directory '/root/.gnupg' created gpg: keybox '/root/.gnupg/pubring.kbx' created gpg: /root/.gnupg/trustdb.gpg: trustdb created gpg: key <>: public key "Nextcloud Security " imported gpg: Total number processed: 1 gpg: imported: 1 gpg: Warning: using insecure memory! gpg: assuming signed data in '/tmp/latest-23.tar.bz2' gpg: Signature made Mon Mar 21 14:09:21 2022 CET gpg: using RSA key <> gpg: Good signature from "Nextcloud Security " [unknown] gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: <> mysql_enable: -> YES redis_enable: -> YES php_fpm_enable: -> YES Copying Caddyfile for no SSL caddy_enable: -> YES caddy_config: -> /usr/local/www/Caddyfile * Stopping nextcloud_23 + Executing prestop OK + Stopping services OK + Tearing down VNET OK + Removing devfs_ruleset: 1008 OK + Removing jail process OK + Executing poststop OK No default gateway found for ipv6. * Starting nextcloud_23 + Started OK + Using devfs_ruleset: 1008 (iocage generated default) + Configuring VNET OK + Using IP options: vnet + Starting services OK + Executing poststart OK The current PHP memory limit is below the recommended value of 512MB. Nextcloud was successfully installed The current PHP memory limit is below the recommended value of 512MB. System config value mysql.utf8mb4 set to boolean true The current PHP memory limit is below the recommended value of 512MB. Check indices of the share table. Check indices of the filecache table. Check indices of the twofactor_providers table. Check indices of the login_flow_v2 table. Check indices of the whats_new table. Check indices of the cards table. Check indices of the cards_properties table. Check indices of the calendarobjects_props table. Check indices of the schedulingobjects table. Check indices of the oc_properties table. Check indices of the oc_jobs table. Done. The current PHP memory limit is below the recommended value of 512MB. All tables already up to date! The current PHP memory limit is below the recommended value of 512MB. System config value logtimezone set to string Europe/Zurich The current PHP memory limit is below the recommended value of 512MB. System config value default_phone_region set to string US The current PHP memory limit is below the recommended value of 512MB. System config value log_type set to string file The current PHP memory limit is below the recommended value of 512MB. System config value logfile set to string /var/log/nextcloud/nextcloud.log The current PHP memory limit is below the recommended value of 512MB. System config value loglevel set to string 2 The current PHP memory limit is below the recommended value of 512MB. System config value logrotate_size set to string 104847600 The current PHP memory limit is below the recommended value of 512MB. System config value memcache.local set to string \OC\Memcache\APCu An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set redis host --value="/var/run/redis/redis.sock" failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set redis port --value=0 --type=integer failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set memcache.distributed --value="\OC\Memcache\Redis" failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set memcache.locking --value="\OC\Memcache\Redis" failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set overwritehost --value="myhost.net" failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set overwrite.cli.url --value="http://myhost.net/" failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set overwriteprotocol --value="http" failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set htaccess.RewriteBase --value="/" failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ maintenance:update:htaccess failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set trusted_domains 1 --value="myhost.net" failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ config:system:set trusted_domains 2 --value="192.168.0.251" failed! An unhandled exception has been thrown: OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php /usr/local/www/nextcloud/occ background:cron failed! OCP\HintException: [0]: Memcache \OC\Memcache\APCu not available for local cache (Is the matching PHP module installed and enabled?) Command: su -m www -c php -f /usr/local/www/nextcloud/cron.php failed! crontab: /mnt/includes/www-crontab: Permission denied Command: crontab /mnt/includes/www-crontab failed! Successfully removed mount from nextcloud_23's fstab Installation complete! Using your web browser, go to http://myhost.net to log in Default user is admin, password is IlVlo+0JZZqmhXI/ Database Information -------------------- Database user = nextcloud Database password = <> The MariaDB root password is <> All passwords are saved in /root/nextcloud_23_db_password.txt Command exit status: 0 Script done on Thu Mar 24 16:35:02 2022