mydomainmydomainScript started on Sun Aug 16 21:41:24 2020 Command: ./nextcloud-jail.sh JAIL_INTERFACES not set, defaulting to: vnet0:bridge0 Existing Nextcloud config detected... Checking Database compatibility for reinstall Database is compatible, continuing... nextcloud successfully created! Testing Host DNS response to pkg.freebsd.org Testing nextcloud's SRV response to pkg.freebsd.org Testing nextcloud's DNSSEC response to pkg.freebsd.org Installing pkg... Installing supplied packages: - nano... - sudo... - redis... ===> Creating groups. Creating group 'redis' with gid '535'. ===> Creating users Creating user 'redis' with uid '535'. ===== Message from redis-5.0.9: -- To setup "redis" you need to edit the configuration file: /usr/local/etc/redis.conf To run redis from startup, add redis_enable="YES" in your /etc/rc.conf. - php74-ctype... ===== Message from php74-ctype-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-ctype.ini - gnupg... ===> Creating groups. Creating group '_tss' with gid '601'. ===> Creating users Creating user '_tss' with uid '601'. ===> Creating groups. Using existing group '_tss'. ===> Creating users Using existing user '_tss'. ===== Message from ca_root_nss-3.55: -- FreeBSD does not, and can not warrant that the certification authorities whose certificates are included in this package have in any way been audited for trustworthiness or RFC 3647 compliance. Assessment and verification of trust is the complete responsibility of the system administrator. This package installs symlinks to support root certificates discovery by default for software that uses OpenSSL. This enables SSL Certificate Verification by client software without manual intervention. If you prefer to do this manually, replace the following symlinks with either an empty file or your site-local certificate bundle. * /etc/ssl/cert.pem * /usr/local/etc/ssl/cert.pem * /usr/local/openssl/cert.pem ===== Message from trousers-0.3.14_2: -- To run tcsd automatically, add the following line to /etc/rc.conf: tcsd_enable="YES" You might want to edit /usr/local/etc/tcsd.conf to reflect your setup. If you want to use tcsd with software TPM emulator, use the following configuration in /etc/rc.conf: tcsd_enable="YES" tcsd_mode="emulator" tpmd_enable="YES" To use TPM, add your_account to '_tss' group like following: # pw groupmod _tss -m your_account ===== Message from gnupg-2.2.20: -- GnuPG, when run on hosts without IPv6 connectivity, may fail to connect to dual-stack hkp servers [1]. As a workaround, add disable-ipv6 to /usr/local/etc/dirmngr.conf [1] https://dev.gnupg.org/rGecfc4db3a2f8bc2652ba4ac4de5ca1cd13bfcbec - bash... - go... - git... ===> Creating groups. Creating group 'git_daemon' with gid '964'. ===> Creating users Creating user 'git_daemon' with uid '964'. ===== Message from perl5-5.30.3: -- The /usr/bin/perl symlink has been removed starting with Perl 5.20. For shebangs, you should either use: #!/usr/local/bin/perl or #!/usr/bin/env perl The first one will only work if you have a /usr/local/bin/perl, the second will work as long as perl is in PATH. ===== Message from apr-1.7.0.1.6.1_1: -- The Apache Portable Runtime project removed support for FreeTDS with version 1.6. Users requiring MS-SQL connectivity must migrate configurations to use the added ODBC driver and FreeTDS' ODBC features. ===== Message from python37-3.7.8: -- Note that some standard Python modules are provided as separate ports as they require additional dependencies. They are available as: py37-gdbm databases/py-gdbm@py37 py37-sqlite3 databases/py-sqlite3@py37 py37-tkinter x11-toolkits/py-tkinter@py37 ===== Message from git-2.27.0: -- If you installed the GITWEB option please follow these instructions: In the directory /usr/local/share/examples/git/gitweb you can find all files to make gitweb work as a public repository on the web. All you have to do to make gitweb work is: 1) Please be sure you're able to execute CGI scripts in /usr/local/share/examples/git/gitweb. 2) Set the GITWEB_CONFIG variable in your webserver's config to /usr/local/etc/git/gitweb.conf. This variable is passed to gitweb.cgi. 3) Restart server. If you installed the CONTRIB option please note that the scripts are installed in /usr/local/share/git-core/contrib. Some of them require other ports to be installed (perl, python, etc), which you may need to install manually. - php74-dom... ===== Message from php74-dom-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-dom.ini - php74-gd... Running fc-cache to build fontconfig cache... Font directories: /usr/local/share/fonts /usr/local/lib/X11/fonts /usr/local/share/fonts: skipping, no such directory /usr/local/lib/X11/fonts: skipping, no such directory /var/db/fontconfig: cleaning cache directory fc-cache: succeeded ===== Message from freetype2-2.10.2: -- The 2.7.x series now uses the new subpixel hinting mode (V40 port's option) as the default, emulating a modern version of ClearType. This change inevitably leads to different rendering results, and you might change port's options to adapt it to your taste (or use the new "FREETYPE_PROPERTIES" environment variable). The environment variable "FREETYPE_PROPERTIES" can be used to control the driver properties. Example: FREETYPE_PROPERTIES=truetype:interpreter-version=35 \ cff:no-stem-darkening=1 \ autofitter:warping=1 This allows to select, say, the subpixel hinting mode at runtime for a given application. If LONG_PCF_NAMES port's option was enabled, the PCF family names may include the foundry and information whether they contain wide characters. For example, "Sony Fixed" or "Misc Fixed Wide", instead of "Fixed". This can be disabled at run time with using pcf:no-long-family-names property, if needed. Example: FREETYPE_PROPERTIES=pcf:no-long-family-names=1 How to recreate fontconfig cache with using such environment variable, if needed: # env FREETYPE_PROPERTIES=pcf:no-long-family-names=1 fc-cache -fsv The controllable properties are listed in the section "Controlling FreeType Modules" in the reference's table of contents (/usr/local/share/doc/freetype2/reference/site/index.html, if documentation was installed). ===== Message from php74-gd-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-gd.ini - php74-iconv... ===== Message from php74-iconv-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-iconv.ini - php74-json... ===== Message from php74-json-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-json.ini - php74-mbstring... ===== Message from php74-mbstring-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-mbstring.ini - php74-posix... ===== Message from php74-posix-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-posix.ini - php74-simplexml... ===== Message from php74-simplexml-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-simplexml.ini - php74-xmlreader... ===== Message from php74-xmlreader-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-xmlreader.ini - php74-xmlwriter... ===== Message from php74-xmlwriter-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-xmlwriter.ini - php74-zip... ===== Message from php74-zip-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-zip.ini - php74-zlib... ===== Message from php74-zlib-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-zlib.ini - php74-xml... ===== Message from php74-xml-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-xml.ini - php74... The most recent versions of packages are already installed - php74-pecl-redis... ===== Message from php74-session-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-18-session.ini ===== Message from php74-pecl-redis-5.3.0_1: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-redis.ini - php74-session... The most recent versions of packages are already installed - php74-xsl... ===== Message from php74-xsl-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-xsl.ini - php74-filter... ===== Message from php74-filter-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-filter.ini - php74-pecl-APCu... ===== Message from php74-pecl-APCu-5.1.18: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-apcu.ini - php74-curl... ===== Message from php74-curl-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-curl.ini - php74-fileinfo... ===== Message from php74-fileinfo-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-fileinfo.ini - php74-bz2... ===== Message from php74-bz2-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-bz2.ini - php74-intl... ===== Message from php74-intl-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-intl.ini - php74-openssl... ===== Message from php74-openssl-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-openssl.ini - php74-ldap... ===== Message from openldap-client-2.4.50: -- The OpenLDAP client package has been successfully installed. Edit /usr/local/etc/openldap/ldap.conf to change the system-wide client defaults. Try `man ldap.conf' and visit the OpenLDAP FAQ-O-Matic at http://www.OpenLDAP.org/faq/index.cgi?file=3 for more information. ===== Message from php74-ldap-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-ldap.ini - php74-ftp... ===== Message from php74-ftp-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-ftp.ini - php74-imap... ===== Message from cclient-2007f_4,1: -- Warning: You have chosen to include SSL support. Applications/ports that use the cclient library but do not support SSL may stop working or have problems linking. Linking them explicitly with ssl (-lssl -lcrypto) may or may not help. -- ===> NOTICE: The cclient port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===== Message from php74-imap-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-imap.ini - php74-exif... ===== Message from php74-exif-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-exif.ini - php74-gmp... ===== Message from php74-gmp-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-gmp.ini - php74-pecl-memcache... ===== Message from php74-pecl-memcache-4.0.5.2: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-memcache.ini - php74-pecl-imagick... No schema files found: doing nothing. ===> Creating groups. Creating group 'messagebus' with gid '556'. ===> Creating users Creating user 'messagebus' with uid '556'. ===> Creating groups. Creating group 'avahi' with gid '558'. ===> Creating users Creating user 'avahi' with uid '558'. ===> Creating groups. Creating group 'cups' with gid '193'. ===> Creating users Creating user 'cups' with uid '193'. ===== Message from ghostscript9-agpl-base-9.52_5: -- This package installs a script named dvipdf that depends on dvips. If you want to use this script you need to install print/tex-dvipsk. ===== Message from libwmf-nox11-0.2.8.4_15: -- ===> NOTICE: The libwmf-nox11 port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===== Message from liblqr-1-0.4.2: -- NOTE: In order to compile examples for liblqr, you will also need pngwriter port (/usr/ports/graphics/pngwriter). Examples are located in /usr/local/share/examples/liblqr-1 ===== Message from php74-pecl-imagick-3.4.4: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-imagick.ini - php74-pecl-smbclient... ===== Message from libinotify-20180201_2: -- Libinotify functionality on FreeBSD is missing support for - detecting a file being moved into or out of a directory within the same filesystem - certain modifications to a symbolic link (rather than the file it points to.) in addition to the known limitations on all platforms using kqueue(2) where various open and close notifications are unimplemented. This means the following regression tests will fail: Directory notifications: IN_MOVED_FROM IN_MOVED_TO Open/close notifications: IN_OPEN IN_CLOSE_NOWRITE IN_CLOSE_WRITE Symbolic Link notifications: IN_DONT_FOLLOW IN_ATTRIB IN_MOVE_SELF IN_DELETE_SELF Kernel patches to address the missing directory and symbolic link notifications are available from: https://github.com/libinotify-kqueue/libinotify-kqueue/tree/master/patches You might want to consider increasing the kern.maxfiles tunable if you plan to use this library for applications that need to monitor activity of a lot of files. ===== Message from gamin-0.1.10_10: -- Gamin will only provide realtime notification of changes for at most n files, where n is the minimum value between (kern.maxfiles * 0.7) and (kern.maxfilesperproc - 200). Beyond that limit, files will be polled. If you often open several large folders with Nautilus, you might want to increase the kern.maxfiles tunable (you do not need to set kern.maxfilesperproc, since it is computed at boot time from kern.maxfiles). The behavior of gamin can be controlled via the various gaminrc files. See http://www.gnome.org/~veillard/gamin/config.html on how to create these files. In particular, if you find gam_server is taking up too much CPU time polling for changes, something like the following may help in one of the gaminrc files: # reduce polling frequency to once per 10 seconds # for UFS file systems in order to lower CPU load fsset ufs poll 10 -- ===> NOTICE: The gamin port currently does not have a maintainer. As a result, it is more likely to have unresolved issues, not be up-to-date, or even be removed in the future. To volunteer to maintain this port, please create an issue at: https://bugs.freebsd.org/bugzilla More information about port maintainership is available at: https://www.freebsd.org/doc/en/articles/contributing/ports-contributing.html#maintain-port ===== Message from samba410-4.10.15: -- How to start: http://wiki.samba.org/index.php/Samba4/HOWTO * Your configuration is: /usr/local/etc/smb4.conf * All the relevant databases are under: /var/db/samba4 * All the logs are under: /var/log/samba4 * Provisioning script is: /usr/local/bin/samba-tool For additional documentation check: http://wiki.samba.org/index.php/Samba4 Bug reports should go to the: https://bugzilla.samba.org/ ===== Message from php74-pecl-smbclient-1.0.0_1: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-smbclient.ini - php74-opcache... ===== Message from php74-opcache-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-10-opcache.ini - php74-pcntl... ===== Message from php74-pcntl-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-pcntl.ini - php74-bcmath... ===== Message from php74-bcmath-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-bcmath.ini - php74-pecl-APCu... The most recent versions of packages are already installed - perl5... The most recent versions of packages are already installed - p5-Locale-gettext... - help2man... - texinfo... - m4... - autoconf... No default gateway found for ipv6. * Starting nextcloud + Started OK + Using devfs_ruleset: 1002 (iocage generated default) + Configuring VNET OK + Using IP options: vnet + Starting services OK + Executing poststart OK Successfully added mount to nextcloud's fstab Successfully added mount to nextcloud's fstab Successfully added mount to nextcloud's fstab Successfully added mount to nextcloud's fstab Successfully added mount to nextcloud's fstab ===> Creating groups. Creating group 'mysql' with gid '88'. ===> Creating users Creating user 'mysql' with uid '88'. ===> Creating homedir(s) ===== Message from boost-libs-1.72.0_2: -- You have built the Boost library with thread support. Don't forget to add -pthread to your linker options when linking your code. ===== Message from mariadb103-client-10.3.23: -- MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for my.cnf. Please move existing my.cnf files from those paths to /usr/local/etc and /usr/local/etc/mysql. ===== Message from galera-25.3.30: -- Find the Galera Cluster documentation at http://galeracluster.com/documentation-webpages/ ===== Message from php74-pdo-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-pdo.ini ===== Message from mariadb103-server-10.3.23: -- MariaDB respects hier(7) and doesn't check /etc and /etc/mysql for my.cnf. Please move existing my.cnf files from those paths to /usr/local/etc and /usr/local/etc/mysql. This port does NOT include the mytop perl script, this is included in the MariaDB tarball but the most recent version can be found in the databases/mytop port ===== Message from php74-pdo_mysql-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-30-pdo_mysql.ini ===== Message from php74-mysqli-7.4.8: -- This file has been added to automatically load the installed extension: /usr/local/etc/php/ext-20-mysqli.ini 2020/08/16 21:48:22 [INFO] Temporary folder: /tmp/buildenv_2020-08-16-2148.951802158 2020/08/16 21:48:22 [INFO] Writing main module: /tmp/buildenv_2020-08-16-2148.951802158/main.go 2020/08/16 21:48:22 [INFO] Initializing Go module 2020/08/16 21:48:22 [INFO] exec (timeout=10s): /usr/local/bin/go mod init caddy go: creating new go.mod: module caddy 2020/08/16 21:48:22 [INFO] Pinning versions 2020/08/16 21:48:22 [INFO] exec (timeout=0s): /usr/local/bin/go get -d -v github.com/caddyserver/caddy/v2@master go: downloading github.com/caddyserver/caddy/v2 v2.2.0-rc.1.0.20200811172619-e385be922569 go: downloading github.com/caddyserver/caddy v1.0.6-0.20200303163406-891446d06340 go: github.com/caddyserver/caddy/v2 master => v2.2.0-rc.1.0.20200811172619-e385be922569 go: downloading github.com/caddyserver/certmagic v0.11.3-0.20200810220624-10a8b5c72339 go: downloading go.uber.org/zap v1.15.0 go: downloading golang.org/x/crypto v0.0.0-20200728195943-123391ffb6de go: downloading github.com/libdns/libdns v0.0.0-20200501023120-186724ffc821 go: downloading github.com/klauspost/cpuid v1.2.5 go: downloading github.com/mholt/acmez v0.1.1-0.20200810215816-dbe88fc6cf09 go: downloading github.com/miekg/dns v1.1.30 go: downloading go.uber.org/multierr v1.5.0 go: downloading go.uber.org/atomic v1.6.0 go: downloading golang.org/x/net v0.0.0-20200707034311-ab3426394381 go: downloading golang.org/x/sys v0.0.0-20200413165638-669c56c373c4 go: downloading golang.org/x/text v0.3.2 2020/08/16 21:48:36 [INFO] exec (timeout=0s): /usr/local/bin/go get -d -v github.com/caddy-dns/cloudflare go: downloading github.com/caddy-dns/cloudflare v0.0.0-20200811180534-4494da72fa56 go: github.com/caddy-dns/cloudflare upgrade => v0.0.0-20200811180534-4494da72fa56 go: downloading github.com/libdns/cloudflare v0.0.0-20200528144945-97886e7873b1 2020/08/16 21:48:38 [INFO] Build environment ready 2020/08/16 21:48:38 [INFO] Building Caddy 2020/08/16 21:48:38 [INFO] exec (timeout=0s): /usr/local/bin/go build -o /usr/local/bin/caddy -ldflags -w -s -trimpath go: downloading github.com/smallstep/cli v0.14.6 go: downloading github.com/smallstep/certificates v0.14.6 go: downloading github.com/smallstep/nosql v0.3.0 go: downloading github.com/alecthomas/chroma v0.8.0 go: downloading github.com/yuin/goldmark v1.2.1 go: downloading github.com/google/cel-go v0.5.1 go: downloading github.com/smallstep/truststore v0.9.6 go: downloading google.golang.org/genproto v0.0.0-20200806141610-86f49bd18e98 go: downloading github.com/jsternberg/zap-logfmt v1.2.0 go: downloading github.com/lucas-clemente/quic-go v0.17.3 go: downloading google.golang.org/protobuf v1.24.0 go: downloading github.com/go-sql-driver/mysql v1.5.0 go: downloading github.com/naoina/toml v0.1.1 go: downloading github.com/marten-seemann/qpack v0.1.0 go: downloading github.com/klauspost/compress v1.10.10 go: downloading github.com/Masterminds/sprig/v3 v3.1.0 go: downloading gopkg.in/yaml.v2 v2.3.0 go: downloading github.com/Masterminds/goutils v1.1.0 go: downloading github.com/imdario/mergo v0.3.8 go: downloading github.com/golang/protobuf v1.4.1 go: downloading github.com/pkg/errors v0.9.1 go: downloading github.com/dgraph-io/badger v1.5.3 go: downloading github.com/google/uuid v1.1.1 go: downloading github.com/Masterminds/semver v1.4.2 go: downloading github.com/go-chi/chi v4.1.2+incompatible go: downloading github.com/Masterminds/semver/v3 v3.1.0 go: downloading github.com/huandu/xstrings v1.3.1 go: downloading go.etcd.io/bbolt v1.3.2 go: downloading gopkg.in/natefinch/lumberjack.v2 v2.0.0 go: downloading github.com/spf13/cast v1.3.1 go: downloading github.com/antlr/antlr4 v0.0.0-20200503195918-621b933c7a7f go: downloading github.com/naoina/go-stringutil v0.1.0 go: downloading github.com/dustin/go-humanize v1.0.1-0.20200219035652-afde56e7acac go: downloading github.com/francoispqt/gojay v1.2.13 go: downloading github.com/dgraph-io/badger/v2 v2.0.1-rc1.0.20200413122845-09dd2e1a4195 go: downloading github.com/mitchellh/copystructure v1.0.0 go: downloading github.com/dlclark/regexp2 v1.2.0 go: downloading github.com/yuin/goldmark-highlighting v0.0.0-20200307114337-60d527fdb691 go: downloading github.com/cheekybits/genny v1.0.0 go: downloading github.com/urfave/cli v1.22.2 go: downloading github.com/marten-seemann/qtls v0.9.1 go: downloading gopkg.in/square/go-jose.v2 v2.4.0 go: downloading github.com/dgraph-io/ristretto v0.0.2-0.20200115201040-8f368f2f2ab3 go: downloading github.com/AndreasBriese/bbloom v0.0.0-20190306092124-e2d15f34fcf9 go: downloading github.com/mitchellh/reflectwalk v1.0.0 go: downloading github.com/cespare/xxhash v1.1.0 go: downloading github.com/dgryski/go-farm v0.0.0-20190423205320-6a90982ecee2 go: downloading github.com/rs/xid v1.2.1 go: downloading github.com/golang/snappy v0.0.1 go: downloading github.com/danwakefield/fnmatch v0.0.0-20160403171240-cbb64ac3d964 go: downloading github.com/cpuguy83/go-md2man v1.0.10 go: downloading github.com/sirupsen/logrus v1.4.2 go: downloading github.com/samfoo/ansi v0.0.0-20160124022901-b6bd2ded7189 go: downloading github.com/manifoldco/promptui v0.3.1 go: downloading github.com/chzyer/readline v0.0.0-20180603132655-2972be24d48e go: downloading github.com/cpuguy83/go-md2man/v2 v2.0.0 go: downloading github.com/shurcooL/sanitized_anchor_name v1.0.0 go: downloading github.com/juju/ansiterm v0.0.0-20180109212912-720a0952cc2a go: downloading github.com/russross/blackfriday v1.5.2 go: downloading github.com/mattn/go-isatty v0.0.12 go: downloading github.com/mattn/go-colorable v0.1.6 go: downloading github.com/lunixbochs/vtclean v1.0.0 go: downloading github.com/russross/blackfriday/v2 v2.0.1 go: downloading google.golang.org/grpc v1.27.1 2020/08/16 21:50:32 [INFO] Build complete: /usr/local/bin/caddy 2020/08/16 21:50:32 [INFO] Cleaning up temporary folder: /tmp/buildenv_2020-08-16-2148.951802158 /tmp/latest-19.tar.bz2 0% of 86 MB 0 Bps /tmp/latest-19.tar.bz2 0% of 86 MB 1106 kBps /tmp/latest-19.tar.bz2 4% of 86 MB 3295 kBps /tmp/latest-19.tar.bz2 11% of 86 MB 5793 kBps 23s /tmp/latest-19.tar.bz2 21% of 86 MB 8838 kBps 14s /tmp/latest-19.tar.bz2 34% of 86 MB 11 MBps 09s /tmp/latest-19.tar.bz2 51% of 86 MB 14 MBps 05s /tmp/latest-19.tar.bz2 71% of 86 MB 17 MBps 02s /tmp/latest-19.tar.bz2 95% of 86 MB 21 MBps 08s /tmp/latest-19.tar.bz2 86 MB 10 MBps 08s /tmp/latest-19.tar.bz2.asc 0% of 819 B 0 Bps /tmp/latest-19.tar.bz2.asc 819 B 11 MBps 00s /tmp/nextcloud.asc 0% of 3100 B 0 Bps /tmp/nextcloud.asc 3100 B 37 MBps 00s gpg: Warning: using insecure memory! gpg: directory '/root/.gnupg' created gpg: keybox '/root/.gnupg/pubring.kbx' created gpg: /root/.gnupg/trustdb.gpg: trustdb created gpg: key D75899B9A724937A: public key "Nextcloud Security " imported gpg: Total number processed: 1 gpg: imported: 1 gpg: Warning: using insecure memory! gpg: assuming signed data in '/tmp/latest-19.tar.bz2' gpg: Signature made Wed Jul 15 22:31:24 2020 CEST gpg: using RSA key D75899B9A724937A gpg: Good signature from "Nextcloud Security " [unknown] gpg: WARNING: This key is not certified with a trusted signature! gpg: There is no indication that the signature belongs to the owner. Primary key fingerprint: 2880 6A87 8AE4 23A2 8372 792E D758 99B9 A724 937A mysql_enable: -> YES redis_enable: -> YES php_fpm_enable: -> YES cp: /mnt/includes/php.ini: No such file or directory Command: cp /mnt/includes/php.ini /usr/local/etc/php.ini failed! cp: /mnt/includes/redis.conf: No such file or directory Command: cp /mnt/includes/redis.conf /usr/local/etc/redis.conf failed! cp: /mnt/includes/www.conf: No such file or directory Command: cp /mnt/includes/www.conf /usr/local/etc/php-fpm.d/ failed! cp: /mnt/includes/remove-staging.sh: No such file or directory Command: cp /mnt/includes/remove-staging.sh /root/ failed! Copying Caddyfile for Let's Encrypt DNS cert cp: /mnt/includes/Caddyfile-dns: No such file or directory Command: cp /mnt/includes/Caddyfile-dns /usr/local/www/Caddyfile failed! cp: /mnt/includes/caddy: No such file or directory Command: cp /mnt/includes/caddy /usr/local/etc/rc.d/ failed! cp: /mnt/includes/my-system.cnf: No such file or directory Command: cp /mnt/includes/my-system.cnf /var/db/mysql/my.cnf failed! sed: /usr/local/www/Caddyfile: No such file or directory Command: sed -i s/yourhostnamehere/Nextcloud.mydomain.com/ /usr/local/www/Caddyfile failed! sed: /usr/local/www/Caddyfile: No such file or directory Command: sed -i s/dns_plugin/cloudflare/ /usr/local/www/Caddyfile failed! sed: /usr/local/www/Caddyfile: No such file or directory Command: sed -i s/api_token/a10v-o0Cb-3HvSUpJ9_JcjAyi6njmfWaNrc3LrA_/ /usr/local/www/Caddyfile failed! sed: /usr/local/www/Caddyfile: No such file or directory Command: sed -i s/jail_ip/192.168.2.96/ /usr/local/www/Caddyfile failed! sed: /usr/local/www/Caddyfile: No such file or directory Command: sed -i s/youremailhere/jaume@mydomain.com/ /usr/local/www/Caddyfile failed! sed: /usr/local/etc/php.ini: No such file or directory Command: sed -i s|mytimezone|Europe/Madrid| /usr/local/etc/php.ini failed! caddy_enable: -> YES caddy_config: -> /usr/local/www/Caddyfile * Stopping nextcloud + Executing prestop OK + Stopping services OK + Tearing down VNET OK + Removing devfs_ruleset: 1002 OK + Removing jail process OK + Executing poststop OK No default gateway found for ipv6. * Starting nextcloud + Started OK + Using devfs_ruleset: 1002 (iocage generated default) + Configuring VNET OK + Using IP options: vnet + Starting services OK + Executing poststart OK Reinstall detected, skipping generation of new config and database cp: /mnt/includes/my.cnf: No such file or directory Command: cp /mnt/includes/my.cnf /root/.my.cnf failed! sed: /root/.my.cnf: No such file or directory Command: sed -i s|mypassword|jL2P7dhDJFywsp2XJ0d0tw==| /root/.my.cnf failed! crontab: /mnt/includes/www-crontab: No such file or directory Command: crontab /mnt/includes/www-crontab failed! Successfully removed mount from nextcloud's fstab Installation complete! Using your web browser, go to https://Nextcloud.mydomain.com to log in You did a reinstall, please use your old database and account credentials You have obtained your Let's Encrypt certificate using the staging server. This certificate will not be trusted by your browser and will cause SSL errors when you connect. Once you've verified that everything else is working correctly, you should issue a trusted certificate. To do this, run: iocage exec nextcloud /root/remove-staging.sh Command exit status: 0 Script done on Sun Aug 16 21:52:50 2020