Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.1-STABLE #0 r321665+d4625dcee3e(freenas/11.1-stable): Wed Dec 13 16:33:42 UTC 2017 root@gauntlet:/freenas-11-releng/freenas/_BE/objs/freenas-11-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64 FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM 5.0.0svn) CPU: Intel(R) Xeon(R) CPU E5620 @ 2.40GHz (2400.14-MHz K8-class CPU) Origin="GenuineIntel" Id=0x206c2 Family=0x6 Model=0x2c Stepping=2 Features=0xbfebfbff Features2=0x29ee3ff AMD Features=0x2c100800 AMD Features2=0x1 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 103616081920 (98815 MB) avail memory = 100180160512 (95539 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs FreeBSD/SMP: 2 package(s) x 4 core(s) x 2 hardware threads WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20170728/tbfadt-850) ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20170728/tbfadt-850) ioapic1 irqs 24-47 on motherboard ioapic0 irqs 0-23 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #9 Launched! SMP: AP CPU #5 Launched! SMP: AP CPU #15 Launched! SMP: AP CPU #10 Launched! SMP: AP CPU #14 Launched! SMP: AP CPU #11 Launched! SMP: AP CPU #8 Launched! SMP: AP CPU #12 Launched! SMP: AP CPU #4 Launched! SMP: AP CPU #13 Launched! Timecounter "TSC-low" frequency 1200068244 Hz quality 1000 random: entropy device external interface kbd1 at kbdmux0 nexus0 cryptosoft0: on motherboard aesni0: on motherboard padlock0: No ACE support. acpi0: on motherboard acpi0: Power Button (fixed) cpu0: on acpi0 cpu1: on acpi0 cpu2: on acpi0 cpu3: on acpi0 cpu4: on acpi0 cpu5: on acpi0 cpu6: on acpi0 cpu7: on acpi0 cpu8: on acpi0 cpu9: on acpi0 cpu10: on acpi0 cpu11: on acpi0 cpu12: on acpi0 cpu13: on acpi0 cpu14: on acpi0 cpu15: on acpi0 attimer0: port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 350 Event timer "HPET1" frequency 14318180 Hz quality 340 Event timer "HPET2" frequency 14318180 Hz quality 340 Event timer "HPET3" frequency 14318180 Hz quality 340 atrtc0: port 0x70-0x71 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 pcib0: on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 ciss0: port 0x4000-0x40ff mem 0xfbc00000-0xfbdfffff,0xfbbf0000-0xfbbf0fff irq 28 at device 0.0 on pci1 ciss0: PERFORMANT Transport pcib2: at device 2.0 on pci0 pci2: on pcib2 pcib3: at device 3.0 on pci0 pci3: on pcib3 mps0: port 0x5000-0x50ff mem 0xfbff0000-0xfbffffff,0xfbf80000-0xfbfbffff irq 24 at device 0.0 on pci3 mps0: Firmware: 20.00.02.00, Driver: 21.02.00.00-fbsd mps0: IOCCapabilities: 5a85c pcib4: at device 4.0 on pci0 pci4: on pcib4 pcib5: at device 5.0 on pci0 pci5: on pcib5 pcib6: at device 6.0 on pci0 pci6: on pcib6 pcib7: at device 7.0 on pci0 pci7: on pcib7 bce0: mem 0xf4000000-0xf5ffffff irq 30 at device 0.0 on pci7 miibus0: on bce0 brgphy0: PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce0: Using defaults for TSO: 65518/35/2048 bce0: Ethernet address: 78:e3:b5:1b:52:d4 bce0: <5>bce0: link state changed to DOWN ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) Coal (RX:6,6,18,18; TX:20,20,80,80) bce1: mem 0xf2000000-0xf3ffffff irq 37 at device 0.1 on pci7 miibus1: on bce1 brgphy1: PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce1: Using defaults for TSO: 65518/35/2048 bce1: Ethernet address: 78:e3:b5:1b:52:d6 bce1: <5>bce1: link state changed to DOWN ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib8: at device 8.0 on pci0 pci8: on pcib8 bce2: mem 0xf8000000-0xf9ffffff irq 31 at device 0.0 on pci8 miibus2: on bce2 brgphy2: PHY 1 on miibus2 brgphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce2: Using defaults for TSO: 65518/35/2048 bce2: Ethernet address: 78:e3:b5:1b:52:dc bce2: <5>bce2: link state changed to DOWN ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) Coal (RX:6,6,18,18; TX:20,20,80,80) bce3: mem 0xf6000000-0xf7ffffff irq 39 at device 0.1 on pci8 miibus3: on bce3 brgphy3: PHY 1 on miibus3 brgphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bce3: Using defaults for TSO: 65518/35/2048 bce3: Ethernet address: 78:e3:b5:1b:52:de bce3: <5>bce3: link state changed to DOWN ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.3); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI|MFW); MFW (NCSI 2.0.12) Coal (RX:6,6,18,18; TX:20,20,80,80) pcib9: at device 9.0 on pci0 pci9: on pcib9 pcib10: at device 10.0 on pci0 pci10: on pcib10 pci0: at device 20.0 (no driver attached) pci0: at device 20.1 (no driver attached) pci0: at device 20.2 (no driver attached) pcib11: at device 28.0 on pci0 pci11: on pcib11 pcib12: at device 28.4 on pci0 pci12: on pcib12 uhci0: port 0x3c00-0x3c1f irq 17 at device 0.4 on pci12 usbus0 on uhci0 usbus0: 12Mbps Full Speed USB v1.0 uhci1: port 0x1000-0x101f irq 20 at device 29.0 on pci0 usbus1 on uhci1 usbus1: 12Mbps Full Speed USB v1.0 uhci2: port 0x1020-0x103f irq 23 at device 29.1 on pci0 usbus2 on uhci2 usbus2: 12Mbps Full Speed USB v1.0 uhci3: port 0x1040-0x105f irq 22 at device 29.2 on pci0 usbus3 on uhci3 usbus3: 12Mbps Full Speed USB v1.0 uhci4: port 0x1060-0x107f irq 23 at device 29.3 on pci0 usbus4 on uhci4 usbus4: 12Mbps Full Speed USB v1.0 ehci0: mem 0xf1bf0000-0xf1bf03ff irq 20 at device 29.7 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci0 usbus5: 480Mbps High Speed USB v2.0 pcib13: at device 30.0 on pci0 pci13: on pcib13 vgapci0: port 0x2000-0x20ff mem 0xe8000000-0xefffffff,0xf1cf0000-0xf1cfffff irq 23 at device 3.0 on pci13 vgapci0: Boot video device isab0: at device 31.0 on pci0 isa0: on isab0 acpi_tz0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] acpi_syscontainer0: port 0x2e-0x2f,0x620-0x65f,0x680-0x69f,0x600-0x61f,0x660-0x67f,0x300-0x31f on acpi0 uart0: port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 ichwd0: on isa0 ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 ichwd0: at port 0x930-0x937,0x960-0x97f on isa0 ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 orm0: at iomem 0xc0000-0xcafff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 uart1: at port 0x2f8 irq 3 on isa0 coretemp0: on cpu0 est0: on cpu0 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est0 attach returned 6 coretemp1: on cpu1 est1: on cpu1 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est1 attach returned 6 coretemp2: on cpu2 est2: on cpu2 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est2 attach returned 6 coretemp3: on cpu3 est3: on cpu3 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est3 attach returned 6 coretemp4: on cpu4 est4: on cpu4 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est4 attach returned 6 coretemp5: on cpu5 est5: on cpu5 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est5 attach returned 6 coretemp6: on cpu6 est6: on cpu6 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est6 attach returned 6 coretemp7: on cpu7 est7: on cpu7 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est7 attach returned 6 coretemp8: on cpu8 est8: on cpu8 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est8 attach returned 6 coretemp9: on cpu9 est9: on cpu9 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est9 attach returned 6 coretemp10: on cpu10 est10: on cpu10 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est10 attach returned 6 coretemp11: on cpu11 est11: on cpu11 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est11 attach returned 6 coretemp12: on cpu12 est12: on cpu12 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est12 attach returned 6 coretemp13: on cpu13 est13: on cpu13 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est13 attach returned 6 coretemp14: on cpu14 est14: on cpu14 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est14 attach returned 6 coretemp15: on cpu15 est15: on cpu15 est: CPU supports Enhanced Speedstep, but is not recognized. est: cpu_vendor GenuineIntel, msr 13 device_attach: est15 attach returned 6 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec freenas_sysctl: adding account. freenas_sysctl: adding directoryservice. freenas_sysctl: adding middlewared. freenas_sysctl: adding network. freenas_sysctl: adding services. ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled nvme cam probe device init ugen1.1: at usbus1 ugen3.1: at usbus3 ugen0.1: at usbus0 ugen5.1: at usbus5 ugen2.1: at usbus2 ugen4.1: at usbus4 uhub0: on usbus1 uhub1: on usbus5 uhub2: on usbus2 uhub3: on usbus4 uhub4: on usbus0 uhub5: on usbus3 uhub2: 2 ports with 2 removable, self powered uhub4: 2 ports with 2 removable, self powered uhub3: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered uhub5: 2 ports with 2 removable, self powered ugen0.2: at usbus0 ukbd0 on uhub4 ukbd0: on usbus0 kbd2 at ukbd0 uhub1: 8 ports with 8 removable, self powered da0 at ciss0 bus 0 scbus0 target 0 lun 0 da1 at ciss0 bus 0 scbus0 target 1 lun 0 da2 at ciss0 bus 0 scbus0 target 2 lun 0 da0: Fixed Direct Access SPC-3 SCSI device da1: Fixed Direct Access SPC-3 SCSI device da0: Serial Number 5001438014332120 da0: 135.168MB/s transfersda1: Serial Number 5001438014332120 da1: 135.168MB/s transfers da1: Command Queueing enabled da1: 286136MB (586006832 512 byte sectors) da2: Fixed Direct Access SPC-3 SCSI device da2: Serial Number 5001438014332120 da2: 135.168MB/s transfers da2: Command Queueing enabled da2: 286136MB (586006832 512 byte sectors) da6 at mps0 bus 0 scbus2 target 24 lun 0 da6: Fixed Direct Access SPC-3 SCSI device da6: Serial Number YGGZ4D5D da6: 300.000MB/s transfers da6: Command Queueing enabled da6: 1907729MB (3907029168 512 byte sectors) da3 at mps0 bus 0 scbus2 target 21 lun 0 da3: Fixed Direct Access SPC-3 SCSI device da3: Serial Number YGGYV33D da3: 300.000MB/s transfers da0: Command Queueing enabled da0: 286070MB (585871964 512 byte sectors) da3: Command Queueing enabled da3: 1907729MB (3907029168 512 byte sectors) da9 at mps0 bus 0 scbus2 target 27 lun 0 da9: Fixed Direct Access SPC-3 SCSI device da9: Serial Number YFH2081D da9: 300.000MB/s transfers da9: Command Queueing enabled da9: 1907729MB (3907029168 512 byte sectors) da12 at mps0 bus 0 scbus2 target 30 lun 0 da12: Fixed Direct Access SPC-3 SCSI device da12: Serial Number YGHD773G da12: 300.000MB/s transfers da12: Command Queueing enabled da12: 1907729MB (3907029168 512 byte sectors) da8 at mps0 bus 0 scbus2 target 26 lun 0 da8: Fixed Direct Access SPC-3 SCSI device da13 at mps0 bus 0 scbus2 target 31 lun 0 da8: Serial Number YGGWVT9D da8: 300.000MB/s transfers da8: Command Queueing enabled da8: 1907729MB (3907029168 512 byte sectors) da11 at mps0 bus 0 scbus2 target 29 lun 0 da11: Fixed Direct Access SPC-3 SCSI device da11: Serial Number YGGZXX2D da11: 300.000MB/s transfers da11: Command Queueing enabled da11: 1907729MB (3907029168 512 byte sectors) da14 at mps0 bus 0 scbus2 target 32 lun 0 da14: Fixed Direct Access SPC-3 SCSI device da14: Serial Number YFHPN78G da14: 300.000MB/s transfers da14: Command Queueing enabled da13: Fixed Direct Access SPC-3 SCSI device da13: Serial Number 9WM5RV7G00009139NXX9 da13: 300.000MB/s transfers da13: Command Queueing enabled da13: 1907729MB (3907029168 512 byte sectors) da4 at mps0 bus 0 scbus2 target 22 lun 0 da4: Fixed Direct Access SPC-3 SCSI device da4: Serial Number YGGZGN4D da4: 300.000MB/s transfers da4: Command Queueing enabled da4: 1907729MB (3907029168 512 byte sectors) da7 at mps0 bus 0 scbus2 target 25 lun 0 da7: Fixed Direct Access SPC-3 SCSI device da7: Serial Number YGGZG68D da7: 300.000MB/s transfers da7: Command Queueing enabled da7: 1907729MB (3907029168 512 byte sectors) da10 at mps0 bus 0 scbus2 target 28 lun 0 da10: Fixed Direct Access SPC-3 SCSI device da10: Serial Number YFHPN99G da10: 300.000MB/s transfers da10: Command Queueing enabled da10: 1907729MB (3907029168 512 byte sectors) da14: 1907729MB (3907029168 512 byte sectors) da5 at mps0 bus 0 scbus2 target 23 lun 0 da5: Fixed Direct Access SPC-3 SCSI device da5: Serial Number YGGWVR4D da5: 300.000MB/s transfers da5: Command Queueing enabled da5: 1907729MB (3907029168 512 byte sectors) ses0 at mps0 bus 0 scbus2 target 33 lun 0 ses0: Fixed Enclosure Services SPC-3 SCSI device ses0: Serial Number SGA00800L4 ses0: 300.000MB/s transfers ses0: SCSI-3 ENC Device ses0: da3,pass3: SAS Device Slot Element: 2 Phys at Slot 1, Not All Phys ses0: phy 0: SAS device type 1 id 0 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01c3642f5 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da4,pass4: SAS Device Slot Element: 2 Phys at Slot 2, Not All Phys ses0: phy 0: SAS device type 1 id 1 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01c376881 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da5,pass5: SAS Device Slot Element: 2 Phys at Slot 3, Not All Phys ses0: phy 0: SAS device type 1 id 2 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01c32a935 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da6,pass6: SAS Device Slot Element: 2 Phys at Slot 4, Not All Phys ses0: phy 0: SAS device type 1 id 3 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01c36ce7d ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da7,pass7: SAS Device Slot Element: 2 Phys at Slot 5, Not All Phys ses0: phy 0: SAS device type 1 id 4 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01c3761c9 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da8,pass8: SAS Device Slot Element: 2 Phys at Slot 6, Not All Phys ses0: phy 0: SAS device type 1 id 5 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01c32aa41 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da9,pass9: SAS Device Slot Element: 2 Phys at Slot 7, Not All Phys ses0: phy 0: SAS device type 1 id 6 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01b3c04e1 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da10,pass10: SAS Device Slot Element: 2 Phys at Slot 8, Not All Phys ses0: phy 0: SAS device type 1 id 7 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01b5fbe01 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da11,pass11: SAS Device Slot Element: 2 Phys at Slot 9, Not All Phys ses0: phy 0: SAS device type 1 id 8 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01c383e91 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da12,pass12: SAS Device Slot Element: 2 Phys at Slot 10, Not All Phys ses0: phy 0: SAS device type 1 id 9 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000cca01c4e9c61 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 ses0: da13,pass13: SAS Device Slot Element: 2 Phys at Slot 11, Not All Phys ses0: phy 0: SAS device type 1 id 10 ses0: phy 0: protocols: Initiator( None ) Target( SSP ) ses0: phy 0: parent 5001438007128c80 addr 5000c500343372c5 ses0: phy 1: SAS device type 0 id 0 ses0: phy 1: protocols: Initiator( None ) Target( None ) ses0: phy 1: parent 0 addr 0 random: unblocking device. Trying to mount root from zfs:freenas-boot/ROOT/11.1-RELEASE []... ipmi0: port 0xca2-0xca3 on acpi0 ipmi0: KCS mode found at io 0xca2 on acpi ipmi0: IPMI device rev. 1, firmware rev. 1.89, version 2.0 ipmi0: Number of channels 1 ipmi0: Attached watchdog ichwd0: at port 0x930-0x937,0x960-0x97f on isa0 ichwd0: ICH WDT present but disabled in BIOS or hardware device_attach: ichwd0 attach returned 6 <118>Loading early kernel modules: GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7) GEOM_MIRROR: Device mirror/swap0 launched (2/2). GEOM_MIRROR: Device mirror/swap1 launched (2/2). GEOM_MIRROR: Device mirror/swap2 launched (2/2). GEOM_MIRROR: Device mirror/swap3 launched (2/2). GEOM_MIRROR: Device mirror/swap4 launched (2/2). GEOM_ELI: Device mirror/swap0.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware GEOM_ELI: Device mirror/swap1.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware GEOM_ELI: Device mirror/swap2.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware GEOM_ELI: Device mirror/swap3.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware GEOM_ELI: Device mirror/swap4.eli created. GEOM_ELI: Encryption: AES-XTS 128 GEOM_ELI: Crypto: hardware <118>Command '('geli', 'onetime', 'mirror/None')' returned non-zero exit status 1. <118>Traceback (most recent call last): <118> File "/usr/local/lib/python3.6/site-packages/middlewared/main.py", line 150, in call_method <118> result = await self.middleware.call_method(self, message) <118> File "/usr/local/lib/python3.6/asyncio/coroutines.py", line 109, in __next__ <118> return self.gen.send(None) <118> File "/usr/local/lib/python3.6/site-packages/middlewared/main.py", line 895, in call_method <118> return await self._call(message['method'], serviceobj, methodobj, params, app=app) <118> File "/usr/local/lib/python3.6/asyncio/coroutines.py", line 109, in __next__ <118> return self.gen.send(None) <118> File "/usr/local/lib/python3.6/site-packages/middlewared/main.py", line 863, in _call <118> return await methodobj(*args) <118> File "/usr/local/lib/python3.6/asyncio/coroutines.py", line 109, in __next__ <118> return self.gen.send(None) <118> File "/usr/local/lib/python3.6/site-packages/middlewared/plugins/disk.py", line 633, in swaps_configure <118> await run('geli', 'onetime', name) <118> File "/usr/local/lib/python3.6/asyncio/coroutines.py", line 109, in __next__ <118> return self.gen.send(None) <118> File "/usr/local/lib/python3.6/site-packages/middlewared/utils.py", line 65, in run <118> cp.check_returncode() <118> File "/usr/local/lib/python3.6/subprocess.py", line 369, in check_returncode <118> self.stderr) <118>subprocess.CalledProcessError: Command '('geli', 'onetime', 'mirror/None')' returned non-zero exit status 1. <118> <118>Setting hostuuid: 2edf8edd-8597-11e6-82d6-78e3b51bb2a0. <118>Setting hostid: 0xce6cf9ce. <118>No suitable dump device was found. <118>Starting file system checks: <118>Mounting local filesystems:. <118>vfs.zfs.arc_max: 99379666944 -> 49663070208 <118>Beginning ZFS volume imports <118> <118> Importing 14035485392131895676 <118> <118><118> spa=Shelf1Vol async request task=1 txg 10538919 open pool version 5000; software version 5000/5; uts 11.1-STABLE 1101505 amd64 spa=Shelf1Vol async request task=32 txg 10538921 import pool version 5000; software version 5000/5; uts 11.1-STABLE 1101505 amd64 <118>ZFS volume imports complete <118>ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/nss /usr/local/lib/perl5/5.24/mach/CORE <118>32-bit compatibility ldconfig path: /usr/lib32 <118>Loading kernel modules: hwpmc: SOFT/16/64/0x67 TSC/1/64/0x20 IAP/4/48/0x3ff IAF/3/48/0x67 UCP/8/48/0x3f8 UCF/1/48/0x60 <118>Setting hostname: sspzfs1.commsolid.com. <118>Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED <118>Feeding entropy: . <118>Created clone interfaces: lagg0. <5>lagg0: link state changed to DOWN <118>Starting Network: lo0 bce0 bce1 bce2 bce3 lagg0. <118>lo0: flags=8049 metric 0 mtu 16384 <118> options=600003 <118> inet6 ::1 prefixlen 128 <118> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 <118> inet 127.0.0.1 netmask 0xff000000 <118> nd6 options=21 <118> groups: lo <118>bce0: flags=8843 metric 0 mtu 1500 <118> options=c01bb <118> ether 78:e3:b5:1b:52:d4 <118> hwaddr 78:e3:b5:1b:52:d4 <118> nd6 options=9 <118> media: Ethernet autoselect (none) <118> status: no carrier <118>bce1: flags=8843 metric 0 mtu 1500 <118> options=c01bb <118> ether 78:e3:b5:1b:52:d4 <118> hwaddr 78:e3:b5:1b:52:d6 <118> nd6 options=9 <118> media: Ethernet autoselect (none) <118> status: no carrier <118>bce2: flags=8802 metric 0 mtu 1500 <118> options=c01bb <118> ether 78:e3:b5:1b:52:dc <118> hwaddr 78:e3:b5:1b:52:dc <118> nd6 options=9 <118> media: Ethernet autoselect <118>bce3: flags=8802 metric 0 mtu 1500 <118> options=c01bb <118> ether 78:e3:b5:1b:52:de <118> hwaddr 78:e3:b5:1b:52:de <118> nd6 options=9 <118> media: Ethernet autoselect <118>lagg0: flags=8843 metric 0 mtu 1500 <118> options=c01bb <118> ether 78:e3:b5:1b:52:d4 <118> inet 10.10.0.19 netmask 0xffff0000 broadcast 10.10.255.255 <118> nd6 options=9 <118> media: Ethernet autoselect <118> status: no carrier <118> groups: lagg <118> laggproto lacp lagghash l2,l3,l4 <118> laggport: bce0 flags=0<> <118> laggport: bce1 flags=0<> <118>Starting devd. <118>Starting Network: bce2. <118>bce2: flags=8802 metric 0 mtu 1500 <118> options=c01bb <118> ether 78:e3:b5:1b:52:dc <118> hwaddr 78:e3:b5:1b:52:dc <118> nd6 options=9 <118> media: Ethernet autoselect <118>Starting Network: bce3. <118>bce3: flags=8802 metric 0 mtu 1500 <118> options=c01bb <118> ether 78:e3:b5:1b:52:de <118> hwaddr 78:e3:b5:1b:52:de <118> nd6 options=9 <118> media: Ethernet autoselect bce1: Gigabit link up! <5>bce1: link state changed to UP <5>lagg0: link state changed to UP <118>Configuring syscons: keymap. ums0 on uhub4 ums0: on usbus0 bce0: Gigabit link up! <5>bce0: link state changed to UP bce0: Gigabit link up! <118>Starting ums0 moused. <118>add host 127.0.0.1: gateway lo0 fib 0: route already in table <118>add net default: gateway 10.10.0.1 <118>add host ::1: gateway lo0 fib 0: route already in table <118>add net fe80::: gateway ::1 <118>add net ff02::: gateway ::1 <118>add net ::ffff:0.0.0.0: gateway ::1 <118>add net ::0.0.0.0: gateway ::1 <118>Waiting for 10.10.0.1 to respond to ICMP ping, got response. <118>Generating host.conf. <118>Warning: unrecognized source [mdns] <118>Starting syslog_ng. <118>Creating and/or trimming log files. <118>Starting rpcbind. <118>Starting watchdogd. <118>Setting up system for textdumps. <118>debug.ddb.textdump.pending: 0 -> 1 <118>debug.debugger_on_panic: 1 -> 1 <118>debug.ddb.capture.bufsize: 49152 -> 524288 <118>Alarm clock <118>Starting nfsuserd. <118>Starting mountd. <118>Starting nfsd. nfsd: can't register svc name <118>Starting statd. <118>Starting lockd. <118>Updating motd:. <118>Mounting late filesystems:. <118>Starting ntpd. <118>Can't load /usr/local/etc/smb4.conf - run testparm to debug it <118>Join is OK <118>/etc/rc: WARNING: /usr/local/etc/smb4.conf is not readable. <118>/etc/rc: WARNING: failed precmd routine for vmware_guestd <118>Performing sanity check on openssh configuration. <118>Starting openssh. <118>Starting snmpd. <118>Starting snmp_agent. <118>Starting smartd_daemon. <118>Starting pbid... <118>Performing sanity check on nginx configuration: <118>nginx: the configuration file /usr/local/etc/nginx/nginx.conf syntax is ok <118>nginx: configuration file /usr/local/etc/nginx/nginx.conf test is successful <118>Starting nginx. <118>Starting mdnsd. <118>install: mkdir : No such file or directory <118>/etc/rc: WARNING: failed precmd routine for minio <118>* [I|O|C] starting jails... <118>Starting dbus. <118>Starting consul_alerts. <118>Starting consul. <118>Starting collectd. <118>plugin_load: plugin "aggregation" successfully loaded. <118>plugin_load: plugin "cpu" successfully loaded. <118>plugin_load: plugin "cputemp" successfully loaded. <118>plugin_load: plugin "ctl" successfully loaded. <118>plugin_load: plugin "df" successfully loaded. <118>plugin_load: plugin "disk" successfully loaded. <118>plugin_load: plugin "exec" successfully loaded. <118>plugin_load: plugin "geom_stat" successfully loaded. <118>plugin_load: plugin "interface" successfully loaded. <118>plugin_load: plugin "load" successfully loaded. <118>plugin_load: plugin "memory" successfully loaded. <118>plugin_load: plugin "network" successfully loaded. <118>plugin_load: plugin "processes" successfully loaded. <118>plugin_load: plugin "rrdtool" successfully loaded. <118>plugin_load: plugin "swap" successfully loaded. <118>plugin_load: plugin "uptime" successfully loaded. <4>Failed to fully fault in a core file segment at VA 0x80092a000 with size 0xd000 to be written at offset 0x3a1000 for process winbindd <118>May 16 23:02:04 sspzfs1 kernel: Failed to fully fault in a core file segment at VA 0x80092a000 with size 0xd000 to be written at offset 0x3a1000 for process winbindd <6>pid 8644 (winbindd), uid 0: exited on signal 6 (core dumped) <118>Flushed all rules. <118>Starting zfsd. <118>Configuring syscons: keymap blanktime. <118>Starting cron. nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session <118> <118>Wed May 16 23:02:21 CEST 2018 nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session nfsrv_cache_session: no session Fatal trap 12: page fault while in kernel mode cpuid = 7; apic id = 15 fault virtual address = 0xbf1a fault code = supervisor read data, page not present instruction pointer = 0x20:0xffffffff80f3921f stack pointer = 0x28:0xfffffe183e267fe0 frame pointer = 0x28:0xfffffe183e267fe0 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 3873 (nfsd: service)