Aug  2 00:00:00 vaultron newsyslog[83461]: logfile turned over due to size>100K
Aug  2 00:00:00 vaultron syslog-ng[1541]: Configuration reload request received, reloading configuration;
Aug  2 00:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/plex@auto-20160802.0000-1m"
Aug  2 05:24:03 vaultron kernel: arp: 192.168.0.150 moved from 02:ff:20:00:06:0a to 0c:c4:7a:c1:f4:f4 on epair1b
Aug  2 08:40:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/software@auto-20160802.0840-2w"
Aug  2 12:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/karin@auto-20160802.1200-2w"
Aug  2 12:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/general@auto-20160802.1200-2w"
Aug  2 12:44:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/mark@auto-20160802.1244-2w"
Aug  2 13:50:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/photos@auto-20160802.1350-2w"
Aug  2 13:50:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/oldmedia@auto-20160802.1350-2w"
Aug  2 17:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/backup_archive@auto-20160802.1700-1m"
Aug  2 17:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/backup@auto-20160802.1700-2w"
Aug  3 00:00:00 vaultron syslog-ng[1541]: Configuration reload request received, reloading configuration;
Aug  3 00:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/plex@auto-20160803.0000-1m"
Aug  3 08:40:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/software@auto-20160803.0840-2w"
Aug  3 09:29:35 vaultron kernel: arp: 192.168.0.150 moved from 02:ff:20:00:06:0a to 0c:c4:7a:c1:f4:f4 on epair1b
Aug  3 12:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/karin@auto-20160803.1200-2w"
Aug  3 12:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/general@auto-20160803.1200-2w"
Aug  3 12:44:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/mark@auto-20160803.1244-2w"
Aug  3 13:50:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/photos@auto-20160803.1350-2w"
Aug  3 13:50:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/oldmedia@auto-20160803.1350-2w"
Aug  3 15:31:04 vaultron manage.py: [common.pipesubr:61] Popen()ing: zfs list -H -o mountpoint,name
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: /sbin/sysctl -n 'kern.maxfilesperproc'
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: mount
Aug  3 15:31:05 vaultron generate_smb4_conf.py: [common.pipesubr:61] Popen()ing: /usr/local/bin/net -d 0 getlocalsid
Aug  3 15:31:05 vaultron notifier: Performing sanity check on Samba configuration: OK
Aug  3 15:31:05 vaultron notifier: Reloading nmbd.
Aug  3 15:31:05 vaultron notifier: Reloading smbd.
Aug  3 15:31:05 vaultron notifier: Reloading winbindd.
Aug  3 15:31:05 vaultron notifier: Stopping mdnsd.
Aug  3 15:31:05 vaultron mDNSResponder: mDNSResponder (Engineering Build) (Jun 27 2016 05:56:33) stopping
Aug  3 15:31:05 vaultron mDNSResponder: mDNS_FinalExit failed to send goodbye for: 0000000801462580 01   26 _smb._tcp.local. PTR vaultron._smb._tcp.local.
Aug  3 15:31:05 vaultron mDNSResponder: mDNS_FinalExit failed to send goodbye for: 0000000801459580 01   27 _http._tcp.local. PTR vaultron._http._tcp.local.
Aug  3 15:31:05 vaultron smbd: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function
Aug  3 15:31:05 vaultron notifier: Waiting for PIDS: 2730.
Aug  3 15:31:05 vaultron notifier: Starting mdnsd.
Aug  3 15:31:05 vaultron mDNSResponder: mDNSResponder (Engineering Build) (Jun 27 2016 05:56:33) starting
Aug  3 15:31:05 vaultron mDNSResponder:  10: Listening for incoming Unix Domain Socket client requests
Aug  3 15:31:05 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  3 15:31:05 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  3 15:31:07 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 vaultron.local. (Addr) that's already in the list
Aug  3 15:31:07 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 150.0.168.192.in-addr.arpa. (PTR) that's already in the list
Aug  3 17:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/backup_archive@auto-20160803.1700-1m"
Aug  3 17:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/backup@auto-20160803.1700-2w"
Aug  4 00:00:00 vaultron syslog-ng[1541]: Configuration reload request received, reloading configuration;
Aug  4 00:00:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/plex@auto-20160804.0000-1m"
Aug  4 06:08:40 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 06:08:40 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 06:08:42 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 06:08:42 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 07:08:51 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 07:08:51 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 07:08:52 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 07:08:52 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 08:09:01 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 08:09:01 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 08:09:02 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 08:09:02 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 08:40:00 vaultron autosnap.py: [tools.autosnap:61] Popen()ing: /sbin/zfs snapshot -r "pool/software@auto-20160804.0840-2w"
Aug  4 09:09:10 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 09:09:10 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 09:09:11 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 09:09:11 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:09:19 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:09:19 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:09:20 vaultron alert.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:09:20 vaultron alert.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:50:09 vaultron updated.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:50:09 vaultron updated.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:50:10 vaultron updated.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:50:10 vaultron updated.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:50:11 vaultron updated.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:50:11 vaultron updated.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:50:11 vaultron updated.py: [freenasOS.Configuration:624] Unable to load https://web.ixsystems.com/updates/ix_crl.pem: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:50:11 vaultron updated.py: [freenasOS.Configuration:638] Unable to load ['https://web.ixsystems.com/updates/ix_crl.pem']: Host web.ixsystems.com returned an invalid certificate ([SSL] internal error (_ssl.c:590)) 
Aug  4 10:50:44 vaultron notifier: shutdown: [pid 22996]
Aug  4 10:50:44 vaultron notifier: Shutdown NOW!
Aug  4 10:50:44 vaultron shutdown: reboot by root: 
Aug  4 10:50:44 vaultron notifier: Shutdown NOW!
Aug  4 10:50:44 vaultron notifier: 
Aug  4 10:50:44 vaultron notifier: System shutdown time has arrived
Aug  4 10:50:44 vaultron GEOM_ELI: Device ada0p1.eli destroyed.
Aug  4 10:50:44 vaultron GEOM_ELI: Detached ada0p1.eli on last close.
Aug  4 10:50:44 vaultron GEOM_ELI: Device ada1p1.eli destroyed.
Aug  4 10:50:44 vaultron GEOM_ELI: Detached ada1p1.eli on last close.
Aug  4 10:50:44 vaultron GEOM_ELI: Device ada2p1.eli destroyed.
Aug  4 10:50:44 vaultron GEOM_ELI: Detached ada2p1.eli on last close.
Aug  4 10:50:44 vaultron GEOM_ELI: Device ada3p1.eli destroyed.
Aug  4 10:50:44 vaultron GEOM_ELI: Detached ada3p1.eli on last close.
Aug  4 10:50:44 vaultron GEOM_ELI: Device ada4p1.eli destroyed.
Aug  4 10:50:44 vaultron GEOM_ELI: Detached ada4p1.eli on last close.
Aug  4 10:50:44 vaultron GEOM_ELI: Device ada5p1.eli destroyed.
Aug  4 10:50:44 vaultron GEOM_ELI: Detached ada5p1.eli on last close.
Aug  4 10:50:45 vaultron GEOM_ELI: Device ada6p1.eli destroyed.
Aug  4 10:50:45 vaultron GEOM_ELI: Detached ada6p1.eli on last close.
Aug  4 10:50:45 vaultron devd: notify_clients: send() failed; dropping unresponsive client
Aug  4 10:50:45 vaultron kernel: epair0a: link state changed to DOWN
Aug  4 10:50:45 vaultron kernel: epair0a: link state changed to DOWN
Aug  4 10:50:45 vaultron kernel: epair0b: link state changed to DOWN
Aug  4 10:50:45 vaultron kernel: epair0b: link state changed to DOWN
Aug  4 10:50:49 vaultron kernel: epair1a: link state changed to DOWN
Aug  4 10:50:49 vaultron kernel: epair1a: link state changed to DOWN
Aug  4 10:50:49 vaultron kernel: epair1b: link state changed to DOWN
Aug  4 10:50:49 vaultron kernel: epair1b: link state changed to DOWN
Aug  4 10:50:49 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:50:49 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:50:49 vaultron kernel: bridge0: link state changed to DOWN
Aug  4 10:50:49 vaultron kernel: bridge0: link state changed to DOWN
Aug  4 10:50:49 vaultron kernel: em0: promiscuous mode disabled
Aug  4 10:50:51 vaultron kernel: ifa_del_loopback_route: deletion failed: 48
Aug  4 10:50:51 vaultron Freed UMA keg (udp_inpcb) was not empty (240 items).  Lost 24 pages of memory.
Aug  4 10:50:51 vaultron Freed UMA keg (udpcb) was not empty (2171 items).  Lost 13 pages of memory.
Aug  4 10:50:51 vaultron Freed UMA keg (tcptw) was not empty (900 items).  Lost 20 pages of memory.
Aug  4 10:50:51 vaultron Freed UMA keg (tcp_inpcb) was not empty (240 items).  Lost 24 pages of memory.
Aug  4 10:50:51 vaultron Freed UMA keg (sackhole) was not empty (1875 items).  Lost 15 pages of memory.
Aug  4 10:50:51 vaultron Freed UMA keg (tcpcb) was not empty (99 items).  Lost 33 pages of memory.
Aug  4 10:50:51 vaultron Freed UMA keg (ripcb) was not empty (120 items).  Lost 12 pages of memory.
Aug  4 10:50:51 vaultron hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
Aug  4 10:50:51 vaultron hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
Aug  4 10:50:52 vaultron syslog-ng[24229]: syslog-ng starting up; version='3.6.4'
Aug  4 10:50:52 vaultron .
Aug  4 10:50:52 vaultron kernel: pid 1541 (syslog-ng), uid 0: exited on signal 6 (core dumped)
Aug  4 10:50:52 vaultron python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Aug  4 10:50:53 vaultron devd: Executing '/etc/rc.d/dhclient quietstart em0'
Aug  4 10:50:53 vaultron kernel: em0: link state changed to UP
Aug  4 10:50:53 vaultron kernel: em0: link state changed to UP
Aug  4 10:50:53 vaultron python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Aug  4 10:50:55 vaultron python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Aug  4 10:50:56 vaultron python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:4 Err:-1 Errno:61 Connection refused
Aug  4 10:50:57 vaultron python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Aug  4 10:50:58 vaultron python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Aug  4 10:50:59 vaultron python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Aug  4 10:51:00 vaultron python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:4 Err:-1 Errno:61 Connection refused
Aug  4 10:51:01 vaultron python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Aug  4 10:51:03 vaultron python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Aug  4 10:51:04 vaultron python: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Aug  4 10:51:05 vaultron python: dnssd_clientstub ConnectToServer: connect() failed path:/var/run/mdnsd Socket:4 Err:-1 Errno:61 Connection refused
Aug  4 10:51:06 vaultron syslog-ng[24229]: syslog-ng shutting down; version='3.6.4'
Aug  4 10:52:26 vaultron syslog-ng[1714]: syslog-ng starting up; version='3.6.4'
Aug  4 10:52:26 vaultron Copyright (c) 1992-2016 The FreeBSD Project.
Aug  4 10:52:26 vaultron Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Aug  4 10:52:26 vaultron 	The Regents of the University of California. All rights reserved.
Aug  4 10:52:26 vaultron FreeBSD is a registered trademark of The FreeBSD Foundation.
Aug  4 10:52:26 vaultron FreeBSD 10.3-STABLE #0 r295946=5327704(9.10-STABLE): Wed Aug  3 12:13:26 PDT 2016
Aug  4 10:52:26 vaultron root@build.ixsystems.com:/tank/home/nightlies/build-freenas9/_BE/objs/tank/home/nightlies/build-freenas9/_BE/os/sys/FreeNAS.amd64 amd64
Aug  4 10:52:26 vaultron FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
Aug  4 10:52:26 vaultron VT(efifb): resolution 800x600
Aug  4 10:52:26 vaultron CPU: Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz (3504.13-MHz K8-class CPU)
Aug  4 10:52:26 vaultron Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
Aug  4 10:52:26 vaultron Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Aug  4 10:52:26 vaultron Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Aug  4 10:52:26 vaultron AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Aug  4 10:52:26 vaultron AMD Features2=0x121<LAHF,ABM,Prefetch>
Aug  4 10:52:26 vaultron Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Aug  4 10:52:26 vaultron XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
Aug  4 10:52:26 vaultron VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Aug  4 10:52:26 vaultron TSC: P-state invariant, performance statistics
Aug  4 10:52:26 vaultron real memory  = 70927777792 (67642 MB)
Aug  4 10:52:26 vaultron avail memory = 66410852352 (63334 MB)
Aug  4 10:52:26 vaultron Event timer "LAPIC" quality 600
Aug  4 10:52:26 vaultron ACPI APIC Table: < >
Aug  4 10:52:26 vaultron FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
Aug  4 10:52:26 vaultron FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
Aug  4 10:52:26 vaultron cpu0 (BSP): APIC ID:  0
Aug  4 10:52:26 vaultron cpu1 (AP): APIC ID:  1
Aug  4 10:52:26 vaultron cpu2 (AP): APIC ID:  2
Aug  4 10:52:26 vaultron cpu3 (AP): APIC ID:  3
Aug  4 10:52:26 vaultron cpu4 (AP): APIC ID:  4
Aug  4 10:52:26 vaultron cpu5 (AP): APIC ID:  5
Aug  4 10:52:26 vaultron cpu6 (AP): APIC ID:  6
Aug  4 10:52:26 vaultron cpu7 (AP): APIC ID:  7
Aug  4 10:52:26 vaultron random: <Software, Yarrow> initialized
Aug  4 10:52:26 vaultron WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Aug  4 10:52:26 vaultron ioapic0 <Version 2.0> irqs 0-23 on motherboard
Aug  4 10:52:26 vaultron module_register_init: MOD_LOAD (vesa, 0xffffffff80e25060, 0) error 19
Aug  4 10:52:26 vaultron kbd1 at kbdmux0
Aug  4 10:52:26 vaultron aesni0: <AES-CBC,AES-XTS> on motherboard
Aug  4 10:52:26 vaultron padlock0: No ACE support.
Aug  4 10:52:26 vaultron cryptosoft0: <software crypto> on motherboard
Aug  4 10:52:26 vaultron acpi0: <SUPERM SUPERM> on motherboard
Aug  4 10:52:26 vaultron acpi0: Power Button (fixed)
Aug  4 10:52:26 vaultron unknown: memory range not supported
Aug  4 10:52:26 vaultron cpu0: <ACPI CPU> on acpi0
Aug  4 10:52:26 vaultron cpu1: <ACPI CPU> on acpi0
Aug  4 10:52:26 vaultron cpu2: <ACPI CPU> on acpi0
Aug  4 10:52:26 vaultron cpu3: <ACPI CPU> on acpi0
Aug  4 10:52:26 vaultron cpu4: <ACPI CPU> on acpi0
Aug  4 10:52:26 vaultron cpu5: <ACPI CPU> on acpi0
Aug  4 10:52:26 vaultron cpu6: <ACPI CPU> on acpi0
Aug  4 10:52:26 vaultron cpu7: <ACPI CPU> on acpi0
Aug  4 10:52:26 vaultron hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Aug  4 10:52:26 vaultron Timecounter "HPET" frequency 24000000 Hz quality 950
Aug  4 10:52:26 vaultron Event timer "HPET" frequency 24000000 Hz quality 550
Aug  4 10:52:26 vaultron atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Aug  4 10:52:26 vaultron atrtc0: Warning: Couldn't map I/O.
Aug  4 10:52:26 vaultron Event timer "RTC" frequency 32768 Hz quality 0
Aug  4 10:52:26 vaultron attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Aug  4 10:52:26 vaultron Timecounter "i8254" frequency 1193182 Hz quality 0
Aug  4 10:52:26 vaultron Event timer "i8254" frequency 1193182 Hz quality 100
Aug  4 10:52:26 vaultron Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
Aug  4 10:52:26 vaultron acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
Aug  4 10:52:26 vaultron pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Aug  4 10:52:26 vaultron pci0: <ACPI PCI bus> on pcib0
Aug  4 10:52:26 vaultron vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xdb000000-0xdbffffff,0xb8000000-0xbfffffff irq 16 at device 2.0 on pci0
Aug  4 10:52:26 vaultron vgapci0: Boot video device
Aug  4 10:52:26 vaultron xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdc330000-0xdc33ffff irq 16 at device 20.0 on pci0
Aug  4 10:52:26 vaultron xhci0: 32 bytes context size, 64-bit DMA
Aug  4 10:52:26 vaultron usbus0: waiting for BIOS to give up control
Aug  4 10:52:26 vaultron usbus0 on xhci0
Aug  4 10:52:26 vaultron pci0: <simple comms> at device 22.0 (no driver attached)
Aug  4 10:52:26 vaultron pci0: <simple comms, UART> at device 22.3 (no driver attached)
Aug  4 10:52:26 vaultron ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdc340000-0xdc341fff,0xdc352000-0xdc3520ff,0xdc351000-0xdc3517ff irq 16 at device 23.0 on pci0
Aug  4 10:52:26 vaultron ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
Aug  4 10:52:26 vaultron ahcich0: <AHCI channel> at channel 0 on ahci0
Aug  4 10:52:26 vaultron ahcich1: <AHCI channel> at channel 1 on ahci0
Aug  4 10:52:26 vaultron ahcich2: <AHCI channel> at channel 2 on ahci0
Aug  4 10:52:26 vaultron ahcich3: <AHCI channel> at channel 3 on ahci0
Aug  4 10:52:26 vaultron ahcich4: <AHCI channel> at channel 4 on ahci0
Aug  4 10:52:26 vaultron ahcich5: <AHCI channel> at channel 5 on ahci0
Aug  4 10:52:26 vaultron ahcich6: <AHCI channel> at channel 6 on ahci0
Aug  4 10:52:26 vaultron ahcich7: <AHCI channel> at channel 7 on ahci0
Aug  4 10:52:26 vaultron pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Aug  4 10:52:26 vaultron pci1: <ACPI PCI bus> on pcib1
Aug  4 10:52:26 vaultron pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
Aug  4 10:52:26 vaultron pci58: <ACPI PCI bus> on pcib2
Aug  4 10:52:26 vaultron igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xdc200000-0xdc27ffff,0xdc280000-0xdc283fff irq 17 at device 0.0 on pci58
Aug  4 10:52:26 vaultron igb0: Using MSIX interrupts with 5 vectors
Aug  4 10:52:26 vaultron igb0: Ethernet address: 0c:c4:7a:c1:f4:f5
Aug  4 10:52:26 vaultron igb0: Bound queue 0 to cpu 0
Aug  4 10:52:26 vaultron igb0: Bound queue 1 to cpu 1
Aug  4 10:52:26 vaultron igb0: Bound queue 2 to cpu 2
Aug  4 10:52:26 vaultron igb0: Bound queue 3 to cpu 3
Aug  4 10:52:26 vaultron pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
Aug  4 10:52:26 vaultron pci59: <ACPI PCI bus> on pcib3
Aug  4 10:52:26 vaultron pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci59
Aug  4 10:52:26 vaultron pci60: <ACPI PCI bus> on pcib4
Aug  4 10:52:26 vaultron pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
Aug  4 10:52:26 vaultron pci61: <ACPI PCI bus> on pcib5
Aug  4 10:52:26 vaultron xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdc100000-0xdc107fff irq 19 at device 0.0 on pci61
Aug  4 10:52:26 vaultron xhci1: 32 bytes context size, 64-bit DMA
Aug  4 10:52:26 vaultron usbus1 on xhci1
Aug  4 10:52:26 vaultron pcib6: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
Aug  4 10:52:26 vaultron pci62: <ACPI PCI bus> on pcib6
Aug  4 10:52:26 vaultron nvme0: <Generic NVMe Device> port 0xd000-0xd0ff mem 0xdc000000-0xdc003fff irq 16 at device 0.0 on pci62
Aug  4 10:52:26 vaultron isab0: <PCI-ISA bridge> at device 31.0 on pci0
Aug  4 10:52:26 vaultron isa0: <ISA bus> on isab0
Aug  4 10:52:26 vaultron pci0: <memory> at device 31.2 (no driver attached)
Aug  4 10:52:26 vaultron pci0: <multimedia, HDA> at device 31.3 (no driver attached)
Aug  4 10:52:26 vaultron em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> mem 0xdc300000-0xdc31ffff irq 16 at device 31.6 on pci0
Aug  4 10:52:26 vaultron em0: Using an MSI interrupt
Aug  4 10:52:26 vaultron em0: Ethernet address: 0c:c4:7a:c1:f4:f4
Aug  4 10:52:26 vaultron acpi_button0: <Sleep Button> on acpi0
Aug  4 10:52:26 vaultron acpi_button1: <Power Button> on acpi0
Aug  4 10:52:26 vaultron acpi_tz0: <Thermal Zone> on acpi0
Aug  4 10:52:26 vaultron acpi_tz1: <Thermal Zone> on acpi0
Aug  4 10:52:26 vaultron wbwd0: <Nuvoton NCT6776 (0xc3/0x33) Watchdog Timer> at port 0x2e-0x2f on isa0
Aug  4 10:52:26 vaultron orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
Aug  4 10:52:26 vaultron coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Aug  4 10:52:26 vaultron est0: <Enhanced SpeedStep Frequency Control> on cpu0
Aug  4 10:52:26 vaultron coretemp1: <CPU On-Die Thermal Sensors> on cpu1
Aug  4 10:52:26 vaultron est1: <Enhanced SpeedStep Frequency Control> on cpu1
Aug  4 10:52:26 vaultron coretemp2: <CPU On-Die Thermal Sensors> on cpu2
Aug  4 10:52:26 vaultron est2: <Enhanced SpeedStep Frequency Control> on cpu2
Aug  4 10:52:26 vaultron coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Aug  4 10:52:26 vaultron est3: <Enhanced SpeedStep Frequency Control> on cpu3
Aug  4 10:52:26 vaultron coretemp4: <CPU On-Die Thermal Sensors> on cpu4
Aug  4 10:52:26 vaultron est4: <Enhanced SpeedStep Frequency Control> on cpu4
Aug  4 10:52:26 vaultron coretemp5: <CPU On-Die Thermal Sensors> on cpu5
Aug  4 10:52:26 vaultron est5: <Enhanced SpeedStep Frequency Control> on cpu5
Aug  4 10:52:26 vaultron coretemp6: <CPU On-Die Thermal Sensors> on cpu6
Aug  4 10:52:26 vaultron est6: <Enhanced SpeedStep Frequency Control> on cpu6
Aug  4 10:52:26 vaultron coretemp7: <CPU On-Die Thermal Sensors> on cpu7
Aug  4 10:52:26 vaultron est7: <Enhanced SpeedStep Frequency Control> on cpu7
Aug  4 10:52:26 vaultron random: unblocking device.
Aug  4 10:52:26 vaultron usbus0: 5.0Gbps Super Speed USB v3.0
Aug  4 10:52:26 vaultron ZFS filesystem version: 5
Aug  4 10:52:26 vaultron ZFS storage pool version: features support (5000)
Aug  4 10:52:26 vaultron Timecounters tick every 1.000 msec
Aug  4 10:52:26 vaultron ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
Aug  4 10:52:26 vaultron usbus1: 5.0Gbps Super Speed USB v3.0
Aug  4 10:52:26 vaultron ugen0.1: <0x8086> at usbus0
Aug  4 10:52:26 vaultron uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Aug  4 10:52:26 vaultron ugen1.1: <0x1b21> at usbus1
Aug  4 10:52:26 vaultron uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
Aug  4 10:52:26 vaultron nvd0: <SAMSUNG MZVPV128HDGM-00000> NVMe namespace
Aug  4 10:52:26 vaultron nvd0: 122104MB (250069680 512 byte sectors)
Aug  4 10:52:26 vaultron uhub1: 4 ports with 4 removable, self powered
Aug  4 10:52:26 vaultron uhub0: 26 ports with 26 removable, self powered
Aug  4 10:52:26 vaultron ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Aug  4 10:52:26 vaultron ada0: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:52:26 vaultron ada0: Serial Number NAGBR8ZX
Aug  4 10:52:26 vaultron ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:52:26 vaultron ada0: Command Queueing enabled
Aug  4 10:52:26 vaultron ada0: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:52:26 vaultron ada0: Previously was known as ad4
Aug  4 10:52:26 vaultron ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
Aug  4 10:52:26 vaultron ada1: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:52:26 vaultron ada1: Serial Number NAGH98HX
Aug  4 10:52:26 vaultron ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:52:26 vaultron ada1: Command Queueing enabled
Aug  4 10:52:26 vaultron ada1: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:52:26 vaultron ada1: Previously was known as ad6
Aug  4 10:52:26 vaultron ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
Aug  4 10:52:26 vaultron ada2: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:52:26 vaultron ada2: Serial Number NAGJWDSY
Aug  4 10:52:26 vaultron ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:52:26 vaultron ada2: Command Queueing enabled
Aug  4 10:52:26 vaultron ada2: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:52:26 vaultron ada2: Previously was known as ad8
Aug  4 10:52:26 vaultron ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
Aug  4 10:52:26 vaultron ada3: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:52:26 vaultron ada3: Serial Number NAG3WVZY
Aug  4 10:52:26 vaultron ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:52:26 vaultron ada3: Command Queueing enabled
Aug  4 10:52:26 vaultron ada3: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:52:26 vaultron ada3: Previously was known as ad12
Aug  4 10:52:26 vaultron ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
Aug  4 10:52:26 vaultron ada4: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:52:26 vaultron ada4: Serial Number NAGBZ3GX
Aug  4 10:52:26 vaultron ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:52:26 vaultron ada4: Command Queueing enabled
Aug  4 10:52:26 vaultron ada4: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:52:26 vaultron ada4: Previously was known as ad14
Aug  4 10:52:26 vaultron ada5 at ahcich6 bus 0 scbus6 target 0 lun 0
Aug  4 10:52:26 vaultron ada5: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:52:26 vaultron ada5: Serial Number NAGD86GX
Aug  4 10:52:26 vaultron ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:52:26 vaultron ada5: Command Queueing enabled
Aug  4 10:52:26 vaultron ada5: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:52:26 vaultron ada5: Previously was known as ad16
Aug  4 10:52:26 vaultron ada6 at ahcich7 bus 0 scbus7 target 0 lun 0
Aug  4 10:52:26 vaultron ada6: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:52:26 vaultron ada6: Serial Number NAGJPTYX
Aug  4 10:52:26 vaultron ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:52:26 vaultron ada6: Command Queueing enabled
Aug  4 10:52:26 vaultron ada6: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:52:26 vaultron ada6: Previously was known as ad18
Aug  4 10:52:26 vaultron SMP: AP CPU #1 Launched!
Aug  4 10:52:26 vaultron SMP: AP CPU #6 Launched!
Aug  4 10:52:26 vaultron SMP: AP CPU #5 Launched!
Aug  4 10:52:26 vaultron SMP: AP CPU #4 Launched!
Aug  4 10:52:26 vaultron SMP: AP CPU #7 Launched!
Aug  4 10:52:26 vaultron SMP: AP CPU #2 Launched!
Aug  4 10:52:26 vaultron SMP: AP CPU #3 Launched!
Aug  4 10:52:26 vaultron Timecounter "TSC-low" frequency 1752066294 Hz quality 1000
Aug  4 10:52:26 vaultron Trying to mount root from zfs:freenas-boot/ROOT/9.10.1 []...
Aug  4 10:52:26 vaultron GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
Aug  4 10:52:26 vaultron kernel: em0: link state changed to UP
Aug  4 10:52:26 vaultron kernel: em0: link state changed to UP
Aug  4 10:52:26 vaultron pmc: Unknown Intel CPU.
Aug  4 10:52:26 vaultron hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
Aug  4 10:52:26 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:52:26 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:52:26 vaultron kernel: em0: link state changed to UP
Aug  4 10:52:26 vaultron kernel: em0: link state changed to UP
Aug  4 10:52:26 vaultron vboxdrv: fAsync=0 offMin=0x18c offMax=0xe32
Aug  4 10:52:27 vaultron GEOM_ELI: Device ada0p1.eli created.
Aug  4 10:52:27 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:52:27 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:52:27 vaultron GEOM_ELI: Device ada1p1.eli created.
Aug  4 10:52:27 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:52:27 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:52:27 vaultron GEOM_ELI: Device ada2p1.eli created.
Aug  4 10:52:27 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:52:27 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:52:27 vaultron GEOM_ELI: Device ada3p1.eli created.
Aug  4 10:52:27 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:52:27 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:52:27 vaultron GEOM_ELI: Device ada4p1.eli created.
Aug  4 10:52:27 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:52:27 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:52:27 vaultron GEOM_ELI: Device ada5p1.eli created.
Aug  4 10:52:27 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:52:27 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:52:27 vaultron GEOM_ELI: Device ada6p1.eli created.
Aug  4 10:52:27 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:52:27 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:52:27 vaultron ntpd[2239]: ntpd 4.2.8p8-a (1): Starting
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [generate_smb4_conf:1474] Unable to open /var/db/samba4/private/secrets.tdb: [Errno 2] No such file or directory
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: /sbin/sysctl -n 'kern.maxfilesperproc'
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:52:29 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: /usr/local/bin/net -d 0 getlocalsid
Aug  4 10:52:30 vaultron smbd: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Aug  4 10:52:29 vaultron root: /etc/rc: WARNING: failed precmd routine for vmware_guestd
Aug  4 10:52:30 vaultron smbd: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Aug  4 10:52:31 vaultron smbd: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Aug  4 10:52:32 vaultron mDNSResponder: mDNSResponder (Engineering Build) (Aug  3 2016 19:22:46) starting
Aug  4 10:52:32 vaultron mDNSResponder:   8: Listening for incoming Unix Domain Socket client requests
Aug  4 10:52:32 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  4 10:52:32 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  4 10:52:32 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 vaultron.local. (Addr) that's already in the list
Aug  4 10:52:32 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 150.0.168.192.in-addr.arpa. (PTR) that's already in the list
Aug  4 10:52:37 vaultron devd: Executing '/etc/pccard_ether bridge0 start'
Aug  4 10:52:37 vaultron bridge0: Ethernet address: 02:96:69:02:50:00
Aug  4 10:52:37 vaultron kernel: bridge0: link state changed to UP
Aug  4 10:52:37 vaultron kernel: bridge0: link state changed to UP
Aug  4 10:52:37 vaultron kernel: em0: promiscuous mode enabled
Aug  4 10:52:37 vaultron epair0a: Ethernet address: 02:ff:20:00:05:0a
Aug  4 10:52:37 vaultron epair0b: Ethernet address: 02:ff:70:00:06:0b
Aug  4 10:52:37 vaultron kernel: epair0a: link state changed to UP
Aug  4 10:52:37 vaultron kernel: epair0a: link state changed to UP
Aug  4 10:52:37 vaultron kernel: epair0b: link state changed to UP
Aug  4 10:52:37 vaultron kernel: epair0b: link state changed to UP
Aug  4 10:52:37 vaultron kernel: epair0a: promiscuous mode enabled
Aug  4 10:52:37 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:52:37 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:52:37 vaultron devd: Executing '/etc/pccard_ether epair0a start'
Aug  4 10:52:37 vaultron devd: Executing '/etc/pccard_ether epair0b start'
Aug  4 10:52:37 vaultron devd: Executing '/etc/rc.d/dhclient quietstart epair0a'
Aug  4 10:52:37 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Aug  4 10:52:37 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Aug  4 10:52:41 vaultron devd: Executing '/etc/rc.d/dhclient quietstart em0'
Aug  4 10:52:41 vaultron kernel: em0: link state changed to UP
Aug  4 10:52:41 vaultron kernel: em0: link state changed to UP
Aug  4 10:52:42 vaultron devd: Executing '/etc/pccard_ether epair1a start'
Aug  4 10:52:42 vaultron devd: Executing '/etc/pccard_ether epair1b start'
Aug  4 10:52:42 vaultron devd: Executing '/etc/rc.d/dhclient quietstart epair1a'
Aug  4 10:52:42 vaultron epair1a: Ethernet address: 02:ff:20:00:06:0a
Aug  4 10:52:42 vaultron epair1b: Ethernet address: 02:ff:70:00:07:0b
Aug  4 10:52:42 vaultron kernel: epair1a: link state changed to UP
Aug  4 10:52:42 vaultron kernel: epair1a: link state changed to UP
Aug  4 10:52:42 vaultron kernel: epair1b: link state changed to UP
Aug  4 10:52:42 vaultron kernel: epair1b: link state changed to UP
Aug  4 10:52:42 vaultron kernel: epair1a: promiscuous mode enabled
Aug  4 10:52:42 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair1b
Aug  4 10:52:42 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair1b
Aug  4 10:52:46 vaultron manage.py: [freeadmin.navtree:631] An error occurred while unserializing from http://192.168.0.150/plugins/transmission/1/_s/treemenu: No JSON object could be decoded
Aug  4 10:52:46 vaultron manage.py: [freeadmin.navtree:631] An error occurred while unserializing from http://192.168.0.150/plugins/plexmediaserver/2/_s/treemenu: No JSON object could be decoded
Aug  4 10:54:17 vaultron syslog-ng[1581]: syslog-ng starting up; version='3.6.4'
Aug  4 10:54:17 vaultron Copyright (c) 1992-2016 The FreeBSD Project.
Aug  4 10:54:17 vaultron Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Aug  4 10:54:17 vaultron 	The Regents of the University of California. All rights reserved.
Aug  4 10:54:17 vaultron FreeBSD is a registered trademark of The FreeBSD Foundation.
Aug  4 10:54:17 vaultron FreeBSD 10.3-STABLE #0 r295946=5327704(9.10-STABLE): Wed Aug  3 12:13:26 PDT 2016
Aug  4 10:54:17 vaultron root@build.ixsystems.com:/tank/home/nightlies/build-freenas9/_BE/objs/tank/home/nightlies/build-freenas9/_BE/os/sys/FreeNAS.amd64 amd64
Aug  4 10:54:17 vaultron FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
Aug  4 10:54:17 vaultron CPU: Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz (3504.15-MHz K8-class CPU)
Aug  4 10:54:17 vaultron Origin="GenuineIntel"  Id=0x506e3  Family=0x6  Model=0x5e  Stepping=3
Aug  4 10:54:17 vaultron Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Aug  4 10:54:17 vaultron Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
Aug  4 10:54:17 vaultron AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Aug  4 10:54:17 vaultron AMD Features2=0x121<LAHF,ABM,Prefetch>
Aug  4 10:54:17 vaultron Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
Aug  4 10:54:17 vaultron XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
Aug  4 10:54:17 vaultron VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Aug  4 10:54:17 vaultron TSC: P-state invariant, performance statistics
Aug  4 10:54:17 vaultron real memory  = 70927777792 (67642 MB)
Aug  4 10:54:17 vaultron avail memory = 66410860544 (63334 MB)
Aug  4 10:54:17 vaultron Event timer "LAPIC" quality 600
Aug  4 10:54:17 vaultron ACPI APIC Table: < >
Aug  4 10:54:17 vaultron FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
Aug  4 10:54:17 vaultron FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 SMT threads
Aug  4 10:54:17 vaultron cpu0 (BSP): APIC ID:  0
Aug  4 10:54:17 vaultron cpu1 (AP): APIC ID:  1
Aug  4 10:54:17 vaultron cpu2 (AP): APIC ID:  2
Aug  4 10:54:17 vaultron cpu3 (AP): APIC ID:  3
Aug  4 10:54:17 vaultron cpu4 (AP): APIC ID:  4
Aug  4 10:54:17 vaultron cpu5 (AP): APIC ID:  5
Aug  4 10:54:17 vaultron cpu6 (AP): APIC ID:  6
Aug  4 10:54:17 vaultron cpu7 (AP): APIC ID:  7
Aug  4 10:54:17 vaultron random: <Software, Yarrow> initialized
Aug  4 10:54:17 vaultron WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Aug  4 10:54:17 vaultron ioapic0 <Version 2.0> irqs 0-23 on motherboard
Aug  4 10:54:17 vaultron module_register_init: MOD_LOAD (vesa, 0xffffffff80e25060, 0) error 19
Aug  4 10:54:17 vaultron kbd1 at kbdmux0
Aug  4 10:54:17 vaultron aesni0: <AES-CBC,AES-XTS> on motherboard
Aug  4 10:54:17 vaultron padlock0: No ACE support.
Aug  4 10:54:17 vaultron cryptosoft0: <software crypto> on motherboard
Aug  4 10:54:17 vaultron acpi0: <SUPERM SUPERM> on motherboard
Aug  4 10:54:17 vaultron acpi0: Power Button (fixed)
Aug  4 10:54:17 vaultron unknown: memory range not supported
Aug  4 10:54:17 vaultron cpu0: <ACPI CPU> on acpi0
Aug  4 10:54:17 vaultron cpu1: <ACPI CPU> on acpi0
Aug  4 10:54:17 vaultron cpu2: <ACPI CPU> on acpi0
Aug  4 10:54:17 vaultron cpu3: <ACPI CPU> on acpi0
Aug  4 10:54:17 vaultron cpu4: <ACPI CPU> on acpi0
Aug  4 10:54:17 vaultron cpu5: <ACPI CPU> on acpi0
Aug  4 10:54:17 vaultron cpu6: <ACPI CPU> on acpi0
Aug  4 10:54:17 vaultron cpu7: <ACPI CPU> on acpi0
Aug  4 10:54:17 vaultron hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Aug  4 10:54:17 vaultron Timecounter "HPET" frequency 24000000 Hz quality 950
Aug  4 10:54:17 vaultron Event timer "HPET" frequency 24000000 Hz quality 550
Aug  4 10:54:17 vaultron atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
Aug  4 10:54:17 vaultron atrtc0: Warning: Couldn't map I/O.
Aug  4 10:54:17 vaultron Event timer "RTC" frequency 32768 Hz quality 0
Aug  4 10:54:17 vaultron attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Aug  4 10:54:17 vaultron Timecounter "i8254" frequency 1193182 Hz quality 0
Aug  4 10:54:17 vaultron Event timer "i8254" frequency 1193182 Hz quality 100
Aug  4 10:54:17 vaultron Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
Aug  4 10:54:17 vaultron acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
Aug  4 10:54:17 vaultron pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Aug  4 10:54:17 vaultron pci0: <ACPI PCI bus> on pcib0
Aug  4 10:54:17 vaultron vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xdb000000-0xdbffffff,0xb8000000-0xbfffffff irq 16 at device 2.0 on pci0
Aug  4 10:54:17 vaultron vgapci0: Boot video device
Aug  4 10:54:17 vaultron xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdc330000-0xdc33ffff irq 16 at device 20.0 on pci0
Aug  4 10:54:17 vaultron xhci0: 32 bytes context size, 64-bit DMA
Aug  4 10:54:17 vaultron usbus0: waiting for BIOS to give up control
Aug  4 10:54:17 vaultron usbus0 on xhci0
Aug  4 10:54:17 vaultron pci0: <simple comms> at device 22.0 (no driver attached)
Aug  4 10:54:17 vaultron pci0: <simple comms, UART> at device 22.3 (no driver attached)
Aug  4 10:54:17 vaultron ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdc340000-0xdc341fff,0xdc352000-0xdc3520ff,0xdc351000-0xdc3517ff irq 16 at device 23.0 on pci0
Aug  4 10:54:17 vaultron ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier not supported
Aug  4 10:54:17 vaultron ahcich0: <AHCI channel> at channel 0 on ahci0
Aug  4 10:54:17 vaultron ahcich1: <AHCI channel> at channel 1 on ahci0
Aug  4 10:54:17 vaultron ahcich2: <AHCI channel> at channel 2 on ahci0
Aug  4 10:54:17 vaultron ahcich3: <AHCI channel> at channel 3 on ahci0
Aug  4 10:54:17 vaultron ahcich4: <AHCI channel> at channel 4 on ahci0
Aug  4 10:54:17 vaultron ahcich5: <AHCI channel> at channel 5 on ahci0
Aug  4 10:54:17 vaultron ahcich6: <AHCI channel> at channel 6 on ahci0
Aug  4 10:54:17 vaultron ahcich7: <AHCI channel> at channel 7 on ahci0
Aug  4 10:54:17 vaultron pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
Aug  4 10:54:17 vaultron pci1: <ACPI PCI bus> on pcib1
Aug  4 10:54:17 vaultron pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
Aug  4 10:54:17 vaultron pci58: <ACPI PCI bus> on pcib2
Aug  4 10:54:17 vaultron igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xe000-0xe01f mem 0xdc200000-0xdc27ffff,0xdc280000-0xdc283fff irq 17 at device 0.0 on pci58
Aug  4 10:54:17 vaultron igb0: Using MSIX interrupts with 5 vectors
Aug  4 10:54:17 vaultron igb0: Ethernet address: 0c:c4:7a:c1:f4:f5
Aug  4 10:54:17 vaultron igb0: Bound queue 0 to cpu 0
Aug  4 10:54:17 vaultron igb0: Bound queue 1 to cpu 1
Aug  4 10:54:17 vaultron igb0: Bound queue 2 to cpu 2
Aug  4 10:54:17 vaultron igb0: Bound queue 3 to cpu 3
Aug  4 10:54:17 vaultron pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.6 on pci0
Aug  4 10:54:17 vaultron pci59: <ACPI PCI bus> on pcib3
Aug  4 10:54:17 vaultron pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci59
Aug  4 10:54:17 vaultron pci60: <ACPI PCI bus> on pcib4
Aug  4 10:54:17 vaultron pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.7 on pci0
Aug  4 10:54:17 vaultron pci61: <ACPI PCI bus> on pcib5
Aug  4 10:54:17 vaultron xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdc100000-0xdc107fff irq 19 at device 0.0 on pci61
Aug  4 10:54:17 vaultron xhci1: 32 bytes context size, 64-bit DMA
Aug  4 10:54:17 vaultron usbus1 on xhci1
Aug  4 10:54:17 vaultron pcib6: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
Aug  4 10:54:17 vaultron pci62: <ACPI PCI bus> on pcib6
Aug  4 10:54:17 vaultron nvme0: <Generic NVMe Device> port 0xd000-0xd0ff mem 0xdc000000-0xdc003fff irq 16 at device 0.0 on pci62
Aug  4 10:54:17 vaultron isab0: <PCI-ISA bridge> at device 31.0 on pci0
Aug  4 10:54:17 vaultron isa0: <ISA bus> on isab0
Aug  4 10:54:17 vaultron pci0: <memory> at device 31.2 (no driver attached)
Aug  4 10:54:17 vaultron pci0: <multimedia, HDA> at device 31.3 (no driver attached)
Aug  4 10:54:17 vaultron em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> mem 0xdc300000-0xdc31ffff irq 16 at device 31.6 on pci0
Aug  4 10:54:17 vaultron em0: Using an MSI interrupt
Aug  4 10:54:17 vaultron em0: Ethernet address: 0c:c4:7a:c1:f4:f4
Aug  4 10:54:17 vaultron acpi_button0: <Sleep Button> on acpi0
Aug  4 10:54:17 vaultron acpi_button1: <Power Button> on acpi0
Aug  4 10:54:17 vaultron acpi_tz0: <Thermal Zone> on acpi0
Aug  4 10:54:17 vaultron acpi_tz1: <Thermal Zone> on acpi0
Aug  4 10:54:17 vaultron wbwd0: <Nuvoton NCT6776 (0xc3/0x33) Watchdog Timer> at port 0x2e-0x2f on isa0
Aug  4 10:54:17 vaultron orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
Aug  4 10:54:17 vaultron coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Aug  4 10:54:17 vaultron est0: <Enhanced SpeedStep Frequency Control> on cpu0
Aug  4 10:54:17 vaultron coretemp1: <CPU On-Die Thermal Sensors> on cpu1
Aug  4 10:54:17 vaultron est1: <Enhanced SpeedStep Frequency Control> on cpu1
Aug  4 10:54:17 vaultron coretemp2: <CPU On-Die Thermal Sensors> on cpu2
Aug  4 10:54:17 vaultron est2: <Enhanced SpeedStep Frequency Control> on cpu2
Aug  4 10:54:17 vaultron coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Aug  4 10:54:17 vaultron est3: <Enhanced SpeedStep Frequency Control> on cpu3
Aug  4 10:54:17 vaultron coretemp4: <CPU On-Die Thermal Sensors> on cpu4
Aug  4 10:54:17 vaultron est4: <Enhanced SpeedStep Frequency Control> on cpu4
Aug  4 10:54:17 vaultron coretemp5: <CPU On-Die Thermal Sensors> on cpu5
Aug  4 10:54:17 vaultron est5: <Enhanced SpeedStep Frequency Control> on cpu5
Aug  4 10:54:17 vaultron coretemp6: <CPU On-Die Thermal Sensors> on cpu6
Aug  4 10:54:17 vaultron est6: <Enhanced SpeedStep Frequency Control> on cpu6
Aug  4 10:54:17 vaultron coretemp7: <CPU On-Die Thermal Sensors> on cpu7
Aug  4 10:54:17 vaultron est7: <Enhanced SpeedStep Frequency Control> on cpu7
Aug  4 10:54:17 vaultron random: unblocking device.
Aug  4 10:54:17 vaultron usbus0: 5.0Gbps Super Speed USB v3.0
Aug  4 10:54:17 vaultron ZFS filesystem version: 5
Aug  4 10:54:17 vaultron ZFS storage pool version: features support (5000)
Aug  4 10:54:17 vaultron Timecounters tick every 1.000 msec
Aug  4 10:54:17 vaultron ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled
Aug  4 10:54:17 vaultron usbus1: 5.0Gbps Super Speed USB v3.0
Aug  4 10:54:17 vaultron ugen1.1: <0x1b21> at usbus1
Aug  4 10:54:17 vaultron uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
Aug  4 10:54:17 vaultron ugen0.1: <0x8086> at usbus0
Aug  4 10:54:17 vaultron uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Aug  4 10:54:17 vaultron nvd0: <SAMSUNG MZVPV128HDGM-00000> NVMe namespace
Aug  4 10:54:17 vaultron nvd0: 122104MB (250069680 512 byte sectors)
Aug  4 10:54:17 vaultron uhub0: 4 ports with 4 removable, self powered
Aug  4 10:54:17 vaultron uhub1: 26 ports with 26 removable, self powered
Aug  4 10:54:17 vaultron ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Aug  4 10:54:17 vaultron ada0: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:54:17 vaultron ada0: Serial Number NAGBR8ZX
Aug  4 10:54:17 vaultron ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:54:17 vaultron ada0: Command Queueing enabled
Aug  4 10:54:17 vaultron ada0: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:54:17 vaultron ada0: Previously was known as ad4
Aug  4 10:54:17 vaultron ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
Aug  4 10:54:17 vaultron ada1: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:54:17 vaultron ada1: Serial Number NAGH98HX
Aug  4 10:54:17 vaultron ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:54:17 vaultron ada1: Command Queueing enabled
Aug  4 10:54:17 vaultron ada1: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:54:17 vaultron ada1: Previously was known as ad6
Aug  4 10:54:17 vaultron ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
Aug  4 10:54:17 vaultron ada2: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:54:17 vaultron ada2: Serial Number NAGJWDSY
Aug  4 10:54:17 vaultron ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:54:17 vaultron ada2: Command Queueing enabled
Aug  4 10:54:17 vaultron ada2: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:54:17 vaultron ada2: Previously was known as ad8
Aug  4 10:54:17 vaultron ada3 at ahcich4 bus 0 scbus4 target 0 lun 0
Aug  4 10:54:17 vaultron ada3: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:54:17 vaultron ada3: Serial Number NAG3WVZY
Aug  4 10:54:17 vaultron ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:54:17 vaultron ada3: Command Queueing enabled
Aug  4 10:54:17 vaultron ada3: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:54:17 vaultron ada3: Previously was known as ad12
Aug  4 10:54:17 vaultron ada4 at ahcich5 bus 0 scbus5 target 0 lun 0
Aug  4 10:54:17 vaultron ada4: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:54:17 vaultron ada4: Serial Number NAGBZ3GX
Aug  4 10:54:17 vaultron ada4: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:54:17 vaultron ada4: Command Queueing enabled
Aug  4 10:54:17 vaultron ada4: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:54:17 vaultron ada4: Previously was known as ad14
Aug  4 10:54:17 vaultron ada5 at ahcich6 bus 0 scbus6 target 0 lun 0
Aug  4 10:54:17 vaultron ada5: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:54:17 vaultron ada5: Serial Number NAGD86GX
Aug  4 10:54:17 vaultron ada5: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:54:17 vaultron ada5: Command Queueing enabled
Aug  4 10:54:17 vaultron ada5: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:54:17 vaultron ada5: Previously was known as ad16
Aug  4 10:54:17 vaultron ada6 at ahcich7 bus 0 scbus7 target 0 lun 0
Aug  4 10:54:17 vaultron ada6: <HGST HDN726050ALE610 APGNT517> ACS-2 ATA SATA 3.x device
Aug  4 10:54:17 vaultron ada6: Serial Number NAGJPTYX
Aug  4 10:54:17 vaultron ada6: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug  4 10:54:17 vaultron ada6: Command Queueing enabled
Aug  4 10:54:17 vaultron ada6: 4769307MB (9767541168 512 byte sectors)
Aug  4 10:54:17 vaultron ada6: Previously was known as ad18
Aug  4 10:54:17 vaultron SMP: AP CPU #1 Launched!
Aug  4 10:54:17 vaultron SMP: AP CPU #2 Launched!
Aug  4 10:54:17 vaultron SMP: AP CPU #3 Launched!
Aug  4 10:54:17 vaultron SMP: AP CPU #4 Launched!
Aug  4 10:54:17 vaultron SMP: AP CPU #6 Launched!
Aug  4 10:54:17 vaultron SMP: AP CPU #5 Launched!
Aug  4 10:54:17 vaultron SMP: AP CPU #7 Launched!
Aug  4 10:54:17 vaultron Timecounter "TSC-low" frequency 1752075174 Hz quality 1000
Aug  4 10:54:17 vaultron Trying to mount root from zfs:freenas-boot/ROOT/9.10.1 []...
Aug  4 10:54:17 vaultron GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7)
Aug  4 10:54:17 vaultron kernel: em0: link state changed to UP
Aug  4 10:54:17 vaultron kernel: em0: link state changed to UP
Aug  4 10:54:17 vaultron pmc: Unknown Intel CPU.
Aug  4 10:54:17 vaultron hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI>
Aug  4 10:54:17 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:54:17 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:54:17 vaultron kernel: em0: link state changed to UP
Aug  4 10:54:17 vaultron kernel: em0: link state changed to UP
Aug  4 10:54:17 vaultron vboxdrv: fAsync=0 offMin=0x1ba offMax=0xc380
Aug  4 10:54:18 vaultron GEOM_ELI: Device ada0p1.eli created.
Aug  4 10:54:18 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:54:18 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:54:18 vaultron GEOM_ELI: Device ada1p1.eli created.
Aug  4 10:54:18 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:54:18 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:54:18 vaultron GEOM_ELI: Device ada2p1.eli created.
Aug  4 10:54:18 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:54:18 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:54:18 vaultron GEOM_ELI: Device ada3p1.eli created.
Aug  4 10:54:18 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:54:18 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:54:18 vaultron GEOM_ELI: Device ada4p1.eli created.
Aug  4 10:54:18 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:54:18 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:54:18 vaultron GEOM_ELI: Device ada5p1.eli created.
Aug  4 10:54:18 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:54:18 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:54:18 vaultron GEOM_ELI: Device ada6p1.eli created.
Aug  4 10:54:18 vaultron GEOM_ELI: Encryption: AES-XTS 128
Aug  4 10:54:18 vaultron GEOM_ELI:     Crypto: hardware
Aug  4 10:54:18 vaultron ntpd[2106]: ntpd 4.2.8p8-a (1): Starting
Aug  4 10:54:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [generate_smb4_conf:1474] Unable to open /var/db/samba4/private/secrets.tdb: [Errno 2] No such file or directory
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: /sbin/sysctl -n 'kern.maxfilesperproc'
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  4 10:54:20 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: /usr/local/bin/net -d 0 getlocalsid
Aug  4 10:54:20 vaultron smbd: dnssd_clientstub ConnectToServer: connect()-> No of tries: 1
Aug  4 10:54:21 vaultron root: /etc/rc: WARNING: failed precmd routine for vmware_guestd
Aug  4 10:54:21 vaultron smbd: dnssd_clientstub ConnectToServer: connect()-> No of tries: 2
Aug  4 10:54:22 vaultron smbd: dnssd_clientstub ConnectToServer: connect()-> No of tries: 3
Aug  4 10:54:23 vaultron mDNSResponder: mDNSResponder (Engineering Build) (Aug  3 2016 19:22:46) starting
Aug  4 10:54:23 vaultron mDNSResponder:   8: Listening for incoming Unix Domain Socket client requests
Aug  4 10:54:23 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  4 10:54:23 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  4 10:54:23 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 vaultron.local. (Addr) that's already in the list
Aug  4 10:54:23 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 150.0.168.192.in-addr.arpa. (PTR) that's already in the list
Aug  4 10:54:23 vaultron mDNSResponder: mDNS_Execute: mDNSPlatformRawTime went backwards by 584 ticks; setting correction factor to 4119735716
Aug  4 10:54:27 vaultron devd: Executing '/etc/pccard_ether bridge0 start'
Aug  4 10:54:27 vaultron devd: Executing '/etc/pccard_ether epair0a start'
Aug  4 10:54:27 vaultron bridge0: Ethernet address: 02:96:69:02:50:00
Aug  4 10:54:27 vaultron kernel: bridge0: link state changed to UP
Aug  4 10:54:27 vaultron kernel: bridge0: link state changed to UP
Aug  4 10:54:27 vaultron kernel: em0: promiscuous mode enabled
Aug  4 10:54:27 vaultron epair0a: Ethernet address: 02:ff:20:00:05:0a
Aug  4 10:54:27 vaultron epair0b: Ethernet address: 02:ff:70:00:06:0b
Aug  4 10:54:27 vaultron kernel: epair0a: link state changed to UP
Aug  4 10:54:27 vaultron kernel: epair0a: link state changed to UP
Aug  4 10:54:27 vaultron kernel: epair0b: link state changed to UP
Aug  4 10:54:27 vaultron kernel: epair0b: link state changed to UP
Aug  4 10:54:27 vaultron kernel: epair0a: promiscuous mode enabled
Aug  4 10:54:27 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:54:27 vaultron kernel: em0: link state changed to DOWN
Aug  4 10:54:27 vaultron devd: Executing '/etc/pccard_ether epair0b start'
Aug  4 10:54:27 vaultron devd: Executing '/etc/rc.d/dhclient quietstart epair0a'
Aug  4 10:54:27 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Aug  4 10:54:27 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Aug  4 10:54:31 vaultron devd: Executing '/etc/rc.d/dhclient quietstart em0'
Aug  4 10:54:31 vaultron kernel: em0: link state changed to UP
Aug  4 10:54:31 vaultron kernel: em0: link state changed to UP
Aug  4 10:54:32 vaultron devd: Executing '/etc/pccard_ether epair1a start'
Aug  4 10:54:32 vaultron devd: Executing '/etc/pccard_ether epair1b start'
Aug  4 10:54:32 vaultron devd: Executing '/etc/rc.d/dhclient quietstart epair1a'
Aug  4 10:54:32 vaultron epair1a: Ethernet address: 02:ff:20:00:06:0a
Aug  4 10:54:32 vaultron epair1b: Ethernet address: 02:ff:70:00:07:0b
Aug  4 10:54:32 vaultron kernel: epair1a: link state changed to UP
Aug  4 10:54:32 vaultron kernel: epair1a: link state changed to UP
Aug  4 10:54:32 vaultron kernel: epair1b: link state changed to UP
Aug  4 10:54:32 vaultron kernel: epair1b: link state changed to UP
Aug  4 10:54:32 vaultron kernel: epair1a: promiscuous mode enabled
Aug  4 10:54:32 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair1b
Aug  4 10:54:32 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair1b
Aug  4 10:54:36 vaultron getty[6900]: open /dev/ttyv4: No such file or directory
Aug  4 10:54:36 vaultron getty[6896]: open /dev/ttyv0: No such file or directory
Aug  4 10:54:36 vaultron getty[6897]: open /dev/ttyv1: No such file or directory
Aug  4 10:54:36 vaultron getty[6898]: open /dev/ttyv2: No such file or directory
Aug  4 10:54:36 vaultron getty[6901]: open /dev/ttyv5: No such file or directory
Aug  4 10:54:36 vaultron getty[6903]: open /dev/ttyv7: No such file or directory
Aug  4 10:54:36 vaultron getty[6899]: open /dev/ttyv3: No such file or directory
Aug  4 10:54:36 vaultron getty[6902]: open /dev/ttyv6: No such file or directory
Aug  4 10:55:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 10:56:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 10:57:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 10:58:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 10:59:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:00:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:01:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:02:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:03:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:04:19 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:05:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:05:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:06:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:07:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:08:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:09:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:10:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:11:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:12:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:13:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:14:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:14:23 vaultron kernel: arp: 192.168.0.150 moved from 02:ff:20:00:06:0a to 0c:c4:7a:c1:f4:f4 on epair1b
Aug  4 11:15:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:16:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:17:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:18:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:19:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:20:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:21:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:22:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:23:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:24:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:25:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:26:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:27:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:28:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:29:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:30:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:31:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:32:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:33:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:34:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:35:20 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:36:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:36:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:37:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:38:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:39:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:40:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:41:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:42:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:43:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:44:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:45:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:46:21 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:47:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:47:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:48:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:49:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:50:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:51:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:52:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:53:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:54:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:55:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:56:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:57:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:58:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 11:59:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:00:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/karin@auto-20160804.1200-2w"
Aug  4 12:00:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/general@auto-20160804.1200-2w"
Aug  4 12:00:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:01:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:02:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:03:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:04:22 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:05:23 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:05:23 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:06:23 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:07:23 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:08:23 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:09:23 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:10:23 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:11:23 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:12:23 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:13:24 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:13:24 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:14:24 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:15:24 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:16:24 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:17:24 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:18:24 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:19:24 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:20:24 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:21:25 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:21:25 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:22:25 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:23:25 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:24:25 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:25:25 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:26:25 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:27:25 vaultron syslog-ng[1581]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  4 12:44:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/mark@auto-20160804.1244-2w"
Aug  4 13:50:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/photos@auto-20160804.1350-2w"
Aug  4 13:50:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/oldmedia@auto-20160804.1350-2w"
Aug  4 17:00:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/backup_archive@auto-20160804.1700-1m"
Aug  4 17:00:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/backup@auto-20160804.1700-2w"
Aug  4 19:15:38 vaultron kernel: arp: 192.168.0.150 moved from 02:ff:20:00:06:0a to 0c:c4:7a:c1:f4:f4 on epair1b
Aug  4 20:09:02 vaultron kernel: epair1a: link state changed to DOWN
Aug  4 20:09:02 vaultron kernel: epair1a: link state changed to DOWN
Aug  4 20:09:02 vaultron kernel: epair1b: link state changed to DOWN
Aug  4 20:09:02 vaultron kernel: epair1b: link state changed to DOWN
Aug  4 20:09:04 vaultron kernel: ifa_del_loopback_route: deletion failed: 48
Aug  4 20:09:04 vaultron Freed UMA keg (udp_inpcb) was not empty (180 items).  Lost 18 pages of memory.
Aug  4 20:09:04 vaultron Freed UMA keg (udpcb) was not empty (1670 items).  Lost 10 pages of memory.
Aug  4 20:09:04 vaultron Freed UMA keg (tcptw) was not empty (405 items).  Lost 9 pages of memory.
Aug  4 20:09:04 vaultron Freed UMA keg (tcp_inpcb) was not empty (120 items).  Lost 12 pages of memory.
Aug  4 20:09:04 vaultron Freed UMA keg (tcpcb) was not empty (36 items).  Lost 12 pages of memory.
Aug  4 20:09:04 vaultron hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
Aug  4 20:09:04 vaultron hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
Aug  4 20:09:05 vaultron devd: Executing '/etc/pccard_ether epair1a start'
Aug  4 20:09:05 vaultron devd: Executing '/etc/pccard_ether epair1b start'
Aug  4 20:09:05 vaultron devd: Executing '/etc/rc.d/dhclient quietstart epair1a'
Aug  4 20:09:05 vaultron epair1a: Ethernet address: 02:ff:20:00:06:0a
Aug  4 20:09:05 vaultron epair1b: Ethernet address: 02:ff:70:00:07:0b
Aug  4 20:09:05 vaultron kernel: epair1a: link state changed to UP
Aug  4 20:09:05 vaultron kernel: epair1a: link state changed to UP
Aug  4 20:09:05 vaultron kernel: epair1b: link state changed to UP
Aug  4 20:09:05 vaultron kernel: epair1b: link state changed to UP
Aug  4 20:09:05 vaultron kernel: epair1a: promiscuous mode enabled
Aug  4 20:09:05 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair1b
Aug  4 20:09:05 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair1b
Aug  4 20:09:18 vaultron kernel: epair0a: link state changed to DOWN
Aug  4 20:09:18 vaultron kernel: epair0a: link state changed to DOWN
Aug  4 20:09:18 vaultron kernel: epair0b: link state changed to DOWN
Aug  4 20:09:18 vaultron kernel: epair0b: link state changed to DOWN
Aug  4 20:09:22 vaultron devd: Executing '/etc/pccard_ether epair0a start'
Aug  4 20:09:22 vaultron devd: Executing '/etc/pccard_ether epair0b start'
Aug  4 20:09:22 vaultron devd: Executing '/etc/rc.d/dhclient quietstart epair0a'
Aug  4 20:09:22 vaultron epair0a: Ethernet address: 02:ff:20:00:05:0a
Aug  4 20:09:22 vaultron epair0b: Ethernet address: 02:ff:70:00:07:0b
Aug  4 20:09:22 vaultron kernel: epair0a: link state changed to UP
Aug  4 20:09:22 vaultron kernel: epair0a: link state changed to UP
Aug  4 20:09:22 vaultron kernel: epair0b: link state changed to UP
Aug  4 20:09:22 vaultron kernel: epair0b: link state changed to UP
Aug  4 20:09:22 vaultron kernel: epair0a: promiscuous mode enabled
Aug  4 20:09:22 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Aug  4 20:09:22 vaultron kernel: ng_ether_ifnet_arrival_event: can't re-name node epair0b
Aug  4 20:15:37 vaultron kernel: ifa_del_loopback_route: deletion failed: 48
Aug  4 20:15:37 vaultron Freed UMA keg (udp_inpcb) was not empty (290 items).  Lost 29 pages of memory.
Aug  4 20:15:37 vaultron Freed UMA keg (udpcb) was not empty (2171 items).  Lost 13 pages of memory.
Aug  4 20:15:37 vaultron Freed UMA keg (tcptw) was not empty (1125 items).  Lost 25 pages of memory.
Aug  4 20:15:37 vaultron Freed UMA keg (tcp_inpcb) was not empty (410 items).  Lost 41 pages of memory.
Aug  4 20:15:37 vaultron Freed UMA keg (sackhole) was not empty (1875 items).  Lost 15 pages of memory.
Aug  4 20:15:37 vaultron Freed UMA keg (tcpcb) was not empty (108 items).  Lost 36 pages of memory.
Aug  4 20:15:37 vaultron hhook_vnet_uninit: hhook_head type=1, id=1 cleanup required
Aug  4 20:15:37 vaultron hhook_vnet_uninit: hhook_head type=1, id=0 cleanup required
Aug  5 00:00:01 vaultron syslog-ng[64293]: syslog-ng starting up; version='3.6.4'
Aug  5 00:00:01 vaultron kernel: pid 1581 (syslog-ng), uid 0: exited on signal 3 (core dumped)
Aug  5 08:40:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/software@auto-20160805.0840-2w"
Aug  5 12:00:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/karin@auto-20160805.1200-2w"
Aug  5 12:00:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/general@auto-20160805.1200-2w"
Aug  5 12:44:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/mark@auto-20160805.1244-2w"
Aug  5 13:50:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/photos@auto-20160805.1350-2w"
Aug  5 13:50:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/oldmedia@auto-20160805.1350-2w"
Aug  5 17:36:57 vaultron kernel: arp: 192.168.0.150 moved from 02:ff:20:00:05:0a to 0c:c4:7a:c1:f4:f4 on epair0b
Aug  6 00:00:00 vaultron syslog-ng[64293]: Configuration reload request received, reloading configuration;
Aug  6 03:34:19 vaultron manage.py: [common.pipesubr:66] Popen()ing: zfs list -H -o mountpoint,name
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: /sbin/sysctl -n 'kern.maxfilesperproc'
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 03:34:19 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: /usr/local/bin/net -d 0 getlocalsid
Aug  6 03:34:20 vaultron notifier: Performing sanity check on Samba configuration: OK
Aug  6 03:34:20 vaultron notifier: Reloading nmbd.
Aug  6 03:34:20 vaultron notifier: Reloading smbd.
Aug  6 03:34:20 vaultron notifier: Reloading winbindd.
Aug  6 03:34:20 vaultron notifier: Stopping mdnsd.
Aug  6 03:34:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:34:20 vaultron smbd: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function
Aug  6 03:34:20 vaultron mDNSResponder: mDNSResponder (Engineering Build) (Aug  3 2016 19:22:46) stopping
Aug  6 03:34:20 vaultron mDNSResponder: mDNS_FinalExit failed to send goodbye for: 0000000801462580 01   26 _smb._tcp.local. PTR vaultron._smb._tcp.local.
Aug  6 03:34:20 vaultron mDNSResponder: mDNS_FinalExit failed to send goodbye for: 0000000801459580 01   27 _http._tcp.local. PTR vaultron._http._tcp.local.
Aug  6 03:34:20 vaultron notifier: Waiting for PIDS: 3081.
Aug  6 03:34:20 vaultron notifier: Starting mdnsd.
Aug  6 03:34:20 vaultron mDNSResponder: mDNSResponder (Engineering Build) (Aug  3 2016 19:22:46) starting
Aug  6 03:34:20 vaultron mDNSResponder:  10: Listening for incoming Unix Domain Socket client requests
Aug  6 03:34:20 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  6 03:34:20 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  6 03:34:21 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 vaultron.local. (Addr) that's already in the list
Aug  6 03:34:21 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 150.0.168.192.in-addr.arpa. (PTR) that's already in the list
Aug  6 03:35:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:36:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:37:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:38:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:39:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:40:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:41:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:42:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:43:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:44:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:45:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:46:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:47:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:48:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:49:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:50:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:51:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:52:20 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:53:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:53:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:54:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:55:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:56:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:57:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:58:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 03:59:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:00:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:01:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:02:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:03:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:04:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:05:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:06:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:07:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:08:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:09:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:10:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:11:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:12:21 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:13:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:13:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:14:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:15:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:16:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:17:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:18:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:19:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:20:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:21:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:22:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:23:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:24:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:25:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:26:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:27:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:28:22 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:29:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:29:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:30:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:31:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:32:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:33:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:34:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:35:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:36:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:37:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:38:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:39:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:40:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:41:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:42:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:43:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:44:23 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:45:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:45:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:46:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:47:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:48:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:49:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:50:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:51:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:52:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:53:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:54:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:55:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:56:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:57:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:58:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 04:59:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:00:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:01:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:02:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:03:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:04:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:05:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:06:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:07:24 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:08:25 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 05:08:25 vaultron syslog-ng[64293]: Error opening file for writing; filename='/dev/console', error='Device not configured (6)'
Aug  6 08:40:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/software@auto-20160806.0840-2w"
Aug  6 09:00:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/itunes@auto-20160806.0900-2m"
Aug  6 12:00:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/karin@auto-20160806.1200-2w"
Aug  6 12:00:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/general@auto-20160806.1200-2w"
Aug  6 12:44:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/mark@auto-20160806.1244-2w"
Aug  6 13:50:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/photos@auto-20160806.1350-2w"
Aug  6 13:50:00 vaultron autosnap.py: [tools.autosnap:66] Popen()ing: /sbin/zfs snapshot -r "pool/oldmedia@auto-20160806.1350-2w"
Aug  6 16:29:48 vaultron kernel: arp: 192.168.0.150 moved from 02:ff:20:00:05:0a to 0c:c4:7a:c1:f4:f4 on epair0b
Aug  6 19:10:54 vaultron manage.py: [common.pipesubr:66] Popen()ing: zfs list -H -o mountpoint,name
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: /sbin/sysctl -n 'kern.maxfilesperproc'
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: mount
Aug  6 19:10:54 vaultron generate_smb4_conf.py: [common.pipesubr:66] Popen()ing: /usr/local/bin/net -d 0 getlocalsid
Aug  6 19:10:55 vaultron notifier: Performing sanity check on Samba configuration: OK
Aug  6 19:10:55 vaultron notifier: Reloading nmbd.
Aug  6 19:10:55 vaultron notifier: Reloading smbd.
Aug  6 19:10:55 vaultron notifier: Reloading winbindd.
Aug  6 19:10:55 vaultron notifier: Stopping mdnsd.
Aug  6 19:10:55 vaultron mDNSResponder: mDNSResponder (Engineering Build) (Aug  3 2016 19:22:46) stopping
Aug  6 19:10:55 vaultron mDNSResponder: mDNS_FinalExit failed to send goodbye for: 0000000801462580 01   27 _http._tcp.local. PTR vaultron._http._tcp.local.
Aug  6 19:10:55 vaultron mDNSResponder: mDNS_FinalExit failed to send goodbye for: 0000000801459580 01   26 _smb._tcp.local. PTR vaultron._smb._tcp.local.
Aug  6 19:10:55 vaultron smbd: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function
Aug  6 19:10:55 vaultron notifier: Waiting for PIDS: 85923.
Aug  6 19:10:55 vaultron notifier: Starting mdnsd.
Aug  6 19:10:55 vaultron mDNSResponder: mDNSResponder (Engineering Build) (Aug  3 2016 19:22:46) starting
Aug  6 19:10:55 vaultron mDNSResponder:  10: Listening for incoming Unix Domain Socket client requests
Aug  6 19:10:55 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  6 19:10:55 vaultron mDNSResponder: mDNS_AddDNSServer: Lock not held! mDNS_busy (0) mDNS_reentrancy (0)
Aug  6 19:10:56 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 vaultron.local. (Addr) that's already in the list
Aug  6 19:10:56 vaultron mDNSResponder: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 150.0.168.192.in-addr.arpa. (PTR) that's already in the list
Aug  7 00:00:00 vaultron newsyslog[76917]: logfile turned over due to size>100K
