Oct 28 16:47:01 freenas cpu2: <ACPI CPU> on acpi0 Oct 28 16:47:01 freenas cpu3: <ACPI CPU> on acpi0 Oct 28 16:47:01 freenas hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Oct 28 16:47:01 freenas Timecounter "HPET" frequency 14318180 Hz quality 950 Oct 28 16:47:01 freenas Event timer "HPET" frequency 14318180 Hz quality 550 Oct 28 16:47:01 freenas Event timer "HPET1" frequency 14318180 Hz quality 440 Oct 28 16:47:01 freenas Event timer "HPET2" frequency 14318180 Hz quality 440 Oct 28 16:47:01 freenas Event timer "HPET3" frequency 14318180 Hz quality 440 Oct 28 16:47:01 freenas Event timer "HPET4" frequency 14318180 Hz quality 440 Oct 28 16:47:01 freenas atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 Oct 28 16:47:01 freenas atrtc0: registered as a time-of-day clock, resolution 1.000000s Oct 28 16:47:01 freenas Event timer "RTC" frequency 32768 Hz quality 0 Oct 28 16:47:01 freenas attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Oct 28 16:47:01 freenas Timecounter "i8254" frequency 1193182 Hz quality 0 Oct 28 16:47:01 freenas Event timer "i8254" frequency 1193182 Hz quality 100 Oct 28 16:47:01 freenas Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 Oct 28 16:47:01 freenas acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 Oct 28 16:47:01 freenas pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Oct 28 16:47:01 freenas pci0: <ACPI PCI bus> on pcib0 Oct 28 16:47:01 freenas xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7220000-0xf722ffff irq 16 at device 20.0 on pci0 Oct 28 16:47:01 freenas xhci0: 32 bytes context size, 64-bit DMA Oct 28 16:47:01 freenas xhci0: Port routing mask set to 0xffffffff Oct 28 16:47:01 freenas usbus0 on xhci0 Oct 28 16:47:01 freenas usbus0: 5.0Gbps Super Speed USB v3.0 Oct 28 16:47:01 freenas em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf020-0xf03f mem 0xf7200000-0xf721ffff,0xf7235000-0xf7235fff irq 20 at device 25.0 on pci0 Oct 28 16:47:01 freenas em0: Using an MSI interrupt Oct 28 16:47:01 freenas em0: Ethernet address: 00:25:90:47:7d:73 Oct 28 16:47:01 freenas ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7234000-0xf72343ff irq 16 at device 26.0 on pci0 Oct 28 16:47:01 freenas usbus1: EHCI version 1.0 Oct 28 16:47:01 freenas usbus1 on ehci0 Oct 28 16:47:01 freenas usbus1: 480Mbps High Speed USB v2.0 Oct 28 16:47:01 freenas pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 Oct 28 16:47:01 freenas pci1: <ACPI PCI bus> on pcib1 Oct 28 16:47:01 freenas pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 Oct 28 16:47:01 freenas pci2: <ACPI PCI bus> on pcib2 Oct 28 16:47:01 freenas vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 16 at device 0.0 on pci2 Oct 28 16:47:01 freenas vgapci0: Boot video device Oct 28 16:47:01 freenas pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 Oct 28 16:47:01 freenas pci3: <ACPI PCI bus> on pcib3 Oct 28 16:47:01 freenas igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xf7100000-0xf717ffff,0xf7180000-0xf7183fff irq 17 at device 0.0 on pci3 Oct 28 16:47:01 freenas igb0: Using MSIX interrupts with 5 vectors Oct 28 16:47:01 freenas igb0: Ethernet address: 00:25:90:47:7d:72 Oct 28 16:47:01 freenas igb0: Bound queue 0 to cpu 0 Oct 28 16:47:01 freenas igb0: Bound queue 1 to cpu 1 Oct 28 16:47:01 freenas igb0: Bound queue 2 to cpu 2 Oct 28 16:47:01 freenas igb0: Bound queue 3 to cpu 3 Oct 28 16:47:01 freenas ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7233000-0xf72333ff irq 23 at device 29.0 on pci0 Oct 28 16:47:01 freenas usbus2: EHCI version 1.0 Oct 28 16:47:01 freenas usbus2 on ehci1 Oct 28 16:47:01 freenas usbus2: 480Mbps High Speed USB v2.0 Oct 28 16:47:01 freenas isab0: <PCI-ISA bridge> at device 31.0 on pci0 Oct 28 16:47:01 freenas isa0: <ISA bus> on isab0 Oct 28 16:47:01 freenas ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xf7232000-0xf72327ff irq 19 at device 31.2 on pci0 Oct 28 16:47:01 freenas ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported Oct 28 16:47:01 freenas ahcich0: <AHCI channel> at channel 0 on ahci0 Oct 28 16:47:01 freenas ahcich1: <AHCI channel> at channel 1 on ahci0 Oct 28 16:47:01 freenas ahcich2: <AHCI channel> at channel 2 on ahci0 Oct 28 16:47:01 freenas ahcich3: <AHCI channel> at channel 3 on ahci0 Oct 28 16:47:01 freenas ahcich4: <AHCI channel> at channel 4 on ahci0 Oct 28 16:47:01 freenas ahcich5: <AHCI channel> at channel 5 on ahci0 Oct 28 16:47:01 freenas acpi_button0: <Sleep Button> on acpi0 Oct 28 16:47:01 freenas acpi_button1: <Power Button> on acpi0 Oct 28 16:47:01 freenas acpi_tz0: <Thermal Zone> on acpi0 Oct 28 16:47:01 freenas acpi_tz1: <Thermal Zone> on acpi0 Oct 28 16:47:01 freenas uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Oct 28 16:47:01 freenas uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Oct 28 16:47:01 freenas ichwd0: <Intel Lynx Point watchdog timer> on isa0 Oct 28 16:47:01 freenas ichwd0: ICH WDT present but disabled in BIOS or hardware Oct 28 16:47:01 freenas device_attach: ichwd0 attach returned 6 Oct 28 16:47:01 freenas ichwd0: <Intel Lynx Point watchdog timer> at port 0x1830-0x1837,0x1860-0x187f on isa0 Oct 28 16:47:01 freenas ichwd0: ICH WDT present but disabled in BIOS or hardware Oct 28 16:47:01 freenas device_attach: ichwd0 attach returned 6 Oct 28 16:47:01 freenas orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0 Oct 28 16:47:01 freenas sc0: <System console> at flags 0x100 on isa0 Oct 28 16:47:01 freenas sc0: CGA <16 virtual consoles, flags=0x300> Oct 28 16:47:01 freenas vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0 Oct 28 16:47:01 freenas coretemp0: <CPU On-Die Thermal Sensors> on cpu0 Oct 28 16:47:01 freenas est0: <Enhanced SpeedStep Frequency Control> on cpu0 Oct 28 16:47:01 freenas coretemp1: <CPU On-Die Thermal Sensors> on cpu1 Oct 28 16:47:01 freenas est1: <Enhanced SpeedStep Frequency Control> on cpu1 Oct 28 16:47:01 freenas coretemp2: <CPU On-Die Thermal Sensors> on cpu2 Oct 28 16:47:01 freenas est2: <Enhanced SpeedStep Frequency Control> on cpu2 Oct 28 16:47:01 freenas coretemp3: <CPU On-Die Thermal Sensors> on cpu3 Oct 28 16:47:01 freenas est3: <Enhanced SpeedStep Frequency Control> on cpu3 Oct 28 16:47:01 freenas ZFS filesystem version: 5 Oct 28 16:47:01 freenas ZFS storage pool version: features support (5000) Oct 28 16:47:01 freenas Timecounters tick every 1.000 msec Oct 28 16:47:01 freenas freenas_sysctl: adding account. Oct 28 16:47:01 freenas freenas_sysctl: adding directoryservice. Oct 28 16:47:01 freenas freenas_sysctl: adding middlewared. Oct 28 16:47:01 freenas freenas_sysctl: adding network. Oct 28 16:47:01 freenas freenas_sysctl: adding services. Oct 28 16:47:01 freenas ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled Oct 28 16:47:01 freenas ugen1.1: <Intel EHCI root HUB> at usbus1 Oct 28 16:47:01 freenas ugen2.1: <Intel EHCI root HUB> at usbus2 Oct 28 16:47:01 freenas ugen0.1: <0x8086 XHCI root HUB> at usbus0 Oct 28 16:47:01 freenas uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Oct 28 16:47:01 freenas uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Oct 28 16:47:01 freenas uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 Oct 28 16:47:01 freenas uhub1: 17 ports with 17 removable, self powered Oct 28 16:47:01 freenas uhub0: 2 ports with 2 removable, self powered Oct 28 16:47:01 freenas uhub2: 2 ports with 2 removable, self powered Oct 28 16:47:01 freenas ugen0.2: <vendor 0x0000 product 0x0001> at usbus0 Oct 28 16:47:01 freenas uhub3 on uhub1 Oct 28 16:47:01 freenas uhub3: <vendor 0x0000 product 0x0001, class 9/0, rev 2.00/0.00, addr 1> on usbus0 Oct 28 16:47:01 freenas uhub3: 4 ports with 3 removable, self powered Oct 28 16:47:01 freenas ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 Oct 28 16:47:01 freenas uhub4 on uhub0 Oct 28 16:47:01 freenas uhub4: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 Oct 28 16:47:01 freenas ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 Oct 28 16:47:01 freenas uhub5 on uhub2 Oct 28 16:47:01 freenas uhub5: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 Oct 28 16:47:01 freenas uhub4: 4 ports with 4 removable, self powered Oct 28 16:47:01 freenas uhub5: 6 ports with 6 removable, self powered Oct 28 16:47:01 freenas ugen0.3: <vendor 0x0557 product 0x2419> at usbus0 Oct 28 16:47:01 freenas ukbd0 on uhub3 Oct 28 16:47:01 freenas ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 Oct 28 16:47:01 freenas kbd0 at ukbd0 Oct 28 16:47:01 freenas ugen0.4: <Kingston DataTraveler 2.0> at usbus0 Oct 28 16:47:01 freenas umass0 on uhub1 Oct 28 16:47:01 freenas umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 3> on usbus0 Oct 28 16:47:01 freenas umass0: SCSI over Bulk-Only; quirks = 0x8100 Oct 28 16:47:01 freenas umass0:7:0: Attached to scbus7 Oct 28 16:47:01 freenas ugen0.5: <Kingston DataTraveler 2.0> at usbus0 Oct 28 16:47:01 freenas umass1 on uhub1 Oct 28 16:47:01 freenas umass1: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 4> on usbus0 Oct 28 16:47:01 freenas umass1: SCSI over Bulk-Only; quirks = 0x8100 Oct 28 16:47:01 freenas umass1:8:1: Attached to scbus8 Oct 28 16:47:01 freenas ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 Oct 28 16:47:01 freenas ada0: <WDC WD30EZRZ-00Z5HB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 16:47:01 freenas da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 Oct 28 16:47:01 freenas ada0: Serial Number WD-WCC4N0XFJ22T Oct 28 16:47:01 freenas da0: ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) Oct 28 16:47:01 freenas ada0: Command Queueing enabled Oct 28 16:47:01 freenas syslog-ng[1723]: Error processing log message: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-2 SCSI device Oct 28 16:47:01 freenas ada0: 2861588MB (5860533168 512 byte sectors) Oct 28 16:47:01 freenas ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 Oct 28 16:47:01 freenas da0: Serial Number 6CF049E0FBE3BF11492F1E7E Oct 28 16:47:01 freenas da0: 40.000MB/s transfers Oct 28 16:47:01 freenas da0: 15004MB (30728832 512 byte sectors) Oct 28 16:47:01 freenas da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> Oct 28 16:47:01 freenas da1 at umass-sim1 bus 1 scbus8 target 0 lun 0 Oct 28 16:47:01 freenas ada1: <WDC WD30EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 16:47:01 freenas ada1: Serial Number WD-WCC4E4ALNH0F Oct 28 16:47:01 freenas da1: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-2 SCSI device Oct 28 16:47:01 freenas da1: Serial Number 50E54951344CBF113946605E Oct 28 16:47:01 freenas da1: 40.000MB/s transfers Oct 28 16:47:01 freenas da1: 15004MB (30728832 512 byte sectors) Oct 28 16:47:01 freenas da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> Oct 28 16:47:01 freenas ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Oct 28 16:47:01 freenas ada1: Command Queueing enabled Oct 28 16:47:01 freenas ada1: 2861588MB (5860533168 512 byte sectors) Oct 28 16:47:01 freenas ada1: quirks=0x1<4K> Oct 28 16:47:01 freenas ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 Oct 28 16:47:01 freenas ada2: <WDC WD30EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 16:47:01 freenas ada2: Serial Number WD-WCC4E7HKVDKR Oct 28 16:47:01 freenas ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Oct 28 16:47:01 freenas ada2: Command Queueing enabled Oct 28 16:47:01 freenas ada2: 2861588MB (5860533168 512 byte sectors) Oct 28 16:47:01 freenas ada2: quirks=0x1<4K> Oct 28 16:47:01 freenas ada3 at ahcich4 bus 0 scbus4 target 0 lun 0 Oct 28 16:47:01 freenas ada3: <WDC WD30EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 16:47:01 freenas ada3: Serial Number WD-WCC4E7UF84DC Oct 28 16:47:01 freenas ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Oct 28 16:47:01 freenas ada3: Command Queueing enabled Oct 28 16:47:01 freenas ada3: 2861588MB (5860533168 512 byte sectors) Oct 28 16:47:01 freenas ada3: quirks=0x1<4K> Oct 28 16:47:01 freenas ada4 at ahcich5 bus 0 scbus5 target 0 lun 0 Oct 28 16:47:01 freenas ada4: <WDC WD30EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 16:47:01 freenas ada4: Serial Number WD-WCC4E5EJSL35 Oct 28 16:47:01 freenas ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Oct 28 16:47:01 freenas ada4: Command Queueing enabled Oct 28 16:47:01 freenas ada4: 2861588MB (5860533168 512 byte sectors) Oct 28 16:47:01 freenas ada4: quirks=0x1<4K> Oct 28 16:47:01 freenas random: unblocking device. Oct 28 16:47:01 freenas Trying to mount root from zfs:freenas-boot/ROOT/11.1-U6 []... Oct 28 16:47:01 freenas kernel: em0: link state changed to UP Oct 28 16:47:01 freenas kernel: em0: link state changed to UP Oct 28 16:47:01 freenas kernel: igb0: link state changed to UP Oct 28 16:47:01 freenas kernel: igb0: link state changed to UP Oct 28 16:47:01 freenas ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 Oct 28 16:47:01 freenas ipmi0: KCS mode found at io 0xca2 on acpi Oct 28 16:47:01 freenas ipmi0: IPMI device rev. 1, firmware rev. 1.35, version 2.0 Oct 28 16:47:01 freenas ipmi0: Number of channels 2 Oct 28 16:47:01 freenas ipmi0: Attached watchdog Oct 28 16:47:01 freenas ichwd0: <Intel Lynx Point watchdog timer> at port 0x1830-0x1837,0x1860-0x187f on isa0 Oct 28 16:47:01 freenas ichwd0: ICH WDT present but disabled in BIOS or hardware Oct 28 16:47:01 freenas device_attach: ichwd0 attach returned 6 Oct 28 16:47:01 freenas GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7) Oct 28 16:47:01 freenas GEOM_MIRROR: Device mirror/swap0 launched (2/2). Oct 28 16:47:01 freenas GEOM_MIRROR: Device mirror/swap1 launched (2/2). Oct 28 16:47:01 freenas GEOM_ELI: Device mirror/swap0.eli created. Oct 28 16:47:01 freenas GEOM_ELI: Encryption: AES-XTS 128 Oct 28 16:47:01 freenas GEOM_ELI: Crypto: hardware Oct 28 16:47:01 freenas GEOM_ELI: Device mirror/swap1.eli created. Oct 28 16:47:01 freenas GEOM_ELI: Encryption: AES-XTS 128 Oct 28 16:47:01 freenas GEOM_ELI: Crypto: hardware Oct 28 16:47:01 freenas hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI> Oct 28 16:47:01 freenas kernel: igb0: link state changed to DOWN Oct 28 16:47:01 freenas kernel: igb0: link state changed to DOWN Oct 28 16:47:01 freenas kernel: igb0: link state changed to UP Oct 28 16:47:01 freenas kernel: igb0: link state changed to UP Oct 28 16:47:01 freenas ums0 on uhub3 Oct 28 16:47:01 freenas ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 Oct 28 16:47:01 freenas ums0: 3 buttons and [Z] coordinates ID=0 Oct 28 16:47:02 freenas ntpd[2130]: ntpd 4.2.8p10-a (1): Starting Oct 28 16:47:07 freenas root: /etc/rc: WARNING: failed precmd routine for minio Oct 28 16:47:08 freenas smartd[2827]: Device: /dev/ada3, 2 Currently unreadable (pending) sectors Oct 28 16:47:08 freenas smartd[2827]: Device: /dev/ada3, 2 Currently unreadable (pending) sectors Oct 28 16:47:16 freenas bridge0: Ethernet address: 02:50:1b:ea:48:00 Oct 28 16:47:16 freenas kernel: bridge0: link state changed to UP Oct 28 16:47:16 freenas kernel: bridge0: link state changed to UP Oct 28 16:47:16 freenas kernel: igb0: promiscuous mode enabled Oct 28 16:47:16 freenas epair0a: Ethernet address: 02:9a:50:00:05:0a Oct 28 16:47:16 freenas epair0b: Ethernet address: 02:9a:a0:00:06:0b Oct 28 16:47:16 freenas kernel: epair0a: link state changed to UP Oct 28 16:47:16 freenas kernel: epair0a: link state changed to UP Oct 28 16:47:16 freenas kernel: epair0b: link state changed to UP Oct 28 16:47:16 freenas kernel: epair0b: link state changed to UP Oct 28 16:47:16 freenas kernel: igb0: link state changed to DOWN Oct 28 16:47:16 freenas kernel: igb0: link state changed to DOWN Oct 28 16:47:16 freenas kernel: epair0a: promiscuous mode enabled Oct 28 16:47:20 freenas kernel: igb0: link state changed to UP Oct 28 16:47:20 freenas kernel: igb0: link state changed to UP Oct 28 18:24:02 freenas syslog-ng[1726]: syslog-ng starting up; version='3.7.3' Oct 28 18:24:02 freenas Copyright (c) 1992-2017 The FreeBSD Project. Oct 28 18:24:02 freenas Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Oct 28 18:24:02 freenas The Regents of the University of California. All rights reserved. Oct 28 18:24:02 freenas FreeBSD is a registered trademark of The FreeBSD Foundation. Oct 28 18:24:02 freenas FreeBSD 11.1-STABLE #0 r321665+9902d126c39(freenas/11.1-stable): Tue Aug 21 12:24:37 EDT 2018 Oct 28 18:24:02 freenas root@nemesis.tn.ixsystems.com:/freenas-11-releng/freenas/_BE/objs/freenas-11-releng/freenas/_BE/os/sys/FreeNAS.amd64 amd64 Oct 28 18:24:02 freenas FreeBSD clang version 5.0.0 (tags/RELEASE_500/final 312559) (based on LLVM 5.0.0svn) Oct 28 18:24:02 freenas CPU: Intel(R) Core(TM) i3-4160 CPU @ 3.60GHz (3600.06-MHz K8-class CPU) Oct 28 18:24:02 freenas Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Oct 28 18:24:02 freenas Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Oct 28 18:24:02 freenas Features2=0x7fdafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> Oct 28 18:24:02 freenas AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> Oct 28 18:24:02 freenas AMD Features2=0x21<LAHF,ABM> Oct 28 18:24:02 freenas Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> Oct 28 18:24:02 freenas XSAVE Features=0x1<XSAVEOPT> Oct 28 18:24:02 freenas VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID Oct 28 18:24:02 freenas TSC: P-state invariant, performance statistics Oct 28 18:24:02 freenas real memory = 17716740096 (16896 MB) Oct 28 18:24:02 freenas avail memory = 16552398848 (15785 MB) Oct 28 18:24:02 freenas Event timer "LAPIC" quality 600 Oct 28 18:24:02 freenas ACPI APIC Table: <SUPERM SMCI--MB> Oct 28 18:24:02 freenas FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs Oct 28 18:24:02 freenas FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads Oct 28 18:24:02 freenas WARNING: VIMAGE (virtualized network stack) is a highly experimental feature. Oct 28 18:24:02 freenas ioapic0 <Version 2.0> irqs 0-23 on motherboard Oct 28 18:24:02 freenas SMP: AP CPU #1 Launched! Oct 28 18:24:02 freenas SMP: AP CPU #2 Launched! Oct 28 18:24:02 freenas SMP: AP CPU #3 Launched! Oct 28 18:24:02 freenas Timecounter "TSC-low" frequency 1800032008 Hz quality 1000 Oct 28 18:24:02 freenas random: entropy device external interface Oct 28 18:24:02 freenas kbd1 at kbdmux0 Oct 28 18:24:02 freenas module_register_init: MOD_LOAD (vesa, 0xffffffff80fc84c0, 0) error 19 Oct 28 18:24:02 freenas random: registering fast source Intel Secure Key RNG Oct 28 18:24:02 freenas random: fast provider: "Intel Secure Key RNG" Oct 28 18:24:02 freenas nexus0 Oct 28 18:24:02 freenas cryptosoft0: <software crypto> on motherboard Oct 28 18:24:02 freenas aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard Oct 28 18:24:02 freenas padlock0: No ACE support. Oct 28 18:24:02 freenas acpi0: <SUPERM SMCI--MB> on motherboard Oct 28 18:24:02 freenas acpi0: Power Button (fixed) Oct 28 18:24:02 freenas cpu0: <ACPI CPU> on acpi0 Oct 28 18:24:02 freenas cpu1: <ACPI CPU> on acpi0 Oct 28 18:24:02 freenas cpu2: <ACPI CPU> on acpi0 Oct 28 18:24:02 freenas cpu3: <ACPI CPU> on acpi0 Oct 28 18:24:02 freenas hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Oct 28 18:24:02 freenas Timecounter "HPET" frequency 14318180 Hz quality 950 Oct 28 18:24:02 freenas Event timer "HPET" frequency 14318180 Hz quality 550 Oct 28 18:24:02 freenas Event timer "HPET1" frequency 14318180 Hz quality 440 Oct 28 18:24:02 freenas Event timer "HPET2" frequency 14318180 Hz quality 440 Oct 28 18:24:02 freenas Event timer "HPET3" frequency 14318180 Hz quality 440 Oct 28 18:24:02 freenas Event timer "HPET4" frequency 14318180 Hz quality 440 Oct 28 18:24:02 freenas atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 Oct 28 18:24:02 freenas atrtc0: registered as a time-of-day clock, resolution 1.000000s Oct 28 18:24:02 freenas Event timer "RTC" frequency 32768 Hz quality 0 Oct 28 18:24:02 freenas attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Oct 28 18:24:02 freenas Timecounter "i8254" frequency 1193182 Hz quality 0 Oct 28 18:24:02 freenas Event timer "i8254" frequency 1193182 Hz quality 100 Oct 28 18:24:02 freenas Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 Oct 28 18:24:02 freenas acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 Oct 28 18:24:02 freenas pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 Oct 28 18:24:02 freenas pci0: <ACPI PCI bus> on pcib0 Oct 28 18:24:02 freenas xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7220000-0xf722ffff irq 16 at device 20.0 on pci0 Oct 28 18:24:02 freenas xhci0: 32 bytes context size, 64-bit DMA Oct 28 18:24:02 freenas xhci0: Port routing mask set to 0xffffffff Oct 28 18:24:02 freenas usbus0 on xhci0 Oct 28 18:24:02 freenas usbus0: 5.0Gbps Super Speed USB v3.0 Oct 28 18:24:02 freenas em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf020-0xf03f mem 0xf7200000-0xf721ffff,0xf7235000-0xf7235fff irq 20 at device 25.0 on pci0 Oct 28 18:24:02 freenas em0: Using an MSI interrupt Oct 28 18:24:02 freenas em0: Ethernet address: 00:25:90:47:7d:73 Oct 28 18:24:02 freenas ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7234000-0xf72343ff irq 16 at device 26.0 on pci0 Oct 28 18:24:02 freenas usbus1: EHCI version 1.0 Oct 28 18:24:02 freenas usbus1 on ehci0 Oct 28 18:24:02 freenas usbus1: 480Mbps High Speed USB v2.0 Oct 28 18:24:02 freenas pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 Oct 28 18:24:02 freenas pci1: <ACPI PCI bus> on pcib1 Oct 28 18:24:02 freenas pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1 Oct 28 18:24:02 freenas pci2: <ACPI PCI bus> on pcib2 Oct 28 18:24:02 freenas vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6ffffff,0xf7000000-0xf701ffff irq 16 at device 0.0 on pci2 Oct 28 18:24:02 freenas vgapci0: Boot video device Oct 28 18:24:02 freenas pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 Oct 28 18:24:02 freenas pci3: <ACPI PCI bus> on pcib3 Oct 28 18:24:02 freenas igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0xd000-0xd01f mem 0xf7100000-0xf717ffff,0xf7180000-0xf7183fff irq 17 at device 0.0 on pci3 Oct 28 18:24:02 freenas igb0: Using MSIX interrupts with 5 vectors Oct 28 18:24:02 freenas igb0: Ethernet address: 00:25:90:47:7d:72 Oct 28 18:24:02 freenas igb0: Bound queue 0 to cpu 0 Oct 28 18:24:02 freenas igb0: Bound queue 1 to cpu 1 Oct 28 18:24:02 freenas igb0: Bound queue 2 to cpu 2 Oct 28 18:24:02 freenas igb0: Bound queue 3 to cpu 3 Oct 28 18:24:02 freenas ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7233000-0xf72333ff irq 23 at device 29.0 on pci0 Oct 28 18:24:02 freenas usbus2: EHCI version 1.0 Oct 28 18:24:02 freenas usbus2 on ehci1 Oct 28 18:24:02 freenas usbus2: 480Mbps High Speed USB v2.0 Oct 28 18:24:02 freenas isab0: <PCI-ISA bridge> at device 31.0 on pci0 Oct 28 18:24:02 freenas isa0: <ISA bus> on isab0 Oct 28 18:24:02 freenas ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f mem 0xf7232000-0xf72327ff irq 19 at device 31.2 on pci0 Oct 28 18:24:02 freenas ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported Oct 28 18:24:02 freenas ahcich0: <AHCI channel> at channel 0 on ahci0 Oct 28 18:24:02 freenas ahcich1: <AHCI channel> at channel 1 on ahci0 Oct 28 18:24:02 freenas ahcich2: <AHCI channel> at channel 2 on ahci0 Oct 28 18:24:02 freenas ahcich3: <AHCI channel> at channel 3 on ahci0 Oct 28 18:24:02 freenas ahcich4: <AHCI channel> at channel 4 on ahci0 Oct 28 18:24:02 freenas ahcich5: <AHCI channel> at channel 5 on ahci0 Oct 28 18:24:02 freenas acpi_button0: <Sleep Button> on acpi0 Oct 28 18:24:02 freenas acpi_button1: <Power Button> on acpi0 Oct 28 18:24:02 freenas acpi_tz0: <Thermal Zone> on acpi0 Oct 28 18:24:02 freenas acpi_tz1: <Thermal Zone> on acpi0 Oct 28 18:24:02 freenas uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Oct 28 18:24:02 freenas uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 Oct 28 18:24:02 freenas ichwd0: <Intel Lynx Point watchdog timer> on isa0 Oct 28 18:24:02 freenas ichwd0: ICH WDT present but disabled in BIOS or hardware Oct 28 18:24:02 freenas device_attach: ichwd0 attach returned 6 Oct 28 18:24:02 freenas ichwd0: <Intel Lynx Point watchdog timer> at port 0x1830-0x1837,0x1860-0x187f on isa0 Oct 28 18:24:02 freenas ichwd0: ICH WDT present but disabled in BIOS or hardware Oct 28 18:24:02 freenas device_attach: ichwd0 attach returned 6 Oct 28 18:24:02 freenas orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff on isa0 Oct 28 18:24:02 freenas sc0: <System console> at flags 0x100 on isa0 Oct 28 18:24:02 freenas sc0: CGA <16 virtual consoles, flags=0x300> Oct 28 18:24:02 freenas vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0 Oct 28 18:24:02 freenas coretemp0: <CPU On-Die Thermal Sensors> on cpu0 Oct 28 18:24:02 freenas est0: <Enhanced SpeedStep Frequency Control> on cpu0 Oct 28 18:24:02 freenas coretemp1: <CPU On-Die Thermal Sensors> on cpu1 Oct 28 18:24:02 freenas est1: <Enhanced SpeedStep Frequency Control> on cpu1 Oct 28 18:24:02 freenas coretemp2: <CPU On-Die Thermal Sensors> on cpu2 Oct 28 18:24:02 freenas est2: <Enhanced SpeedStep Frequency Control> on cpu2 Oct 28 18:24:02 freenas coretemp3: <CPU On-Die Thermal Sensors> on cpu3 Oct 28 18:24:02 freenas est3: <Enhanced SpeedStep Frequency Control> on cpu3 Oct 28 18:24:02 freenas ZFS filesystem version: 5 Oct 28 18:24:02 freenas ZFS storage pool version: features support (5000) Oct 28 18:24:02 freenas Timecounters tick every 1.000 msec Oct 28 18:24:02 freenas freenas_sysctl: adding account. Oct 28 18:24:02 freenas freenas_sysctl: adding directoryservice. Oct 28 18:24:02 freenas freenas_sysctl: adding middlewared. Oct 28 18:24:02 freenas freenas_sysctl: adding network. Oct 28 18:24:02 freenas freenas_sysctl: adding services. Oct 28 18:24:02 freenas ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, logging disabled Oct 28 18:24:02 freenas ugen1.1: <Intel EHCI root HUB> at usbus1 Oct 28 18:24:02 freenas ugen2.1: <Intel EHCI root HUB> at usbus2 Oct 28 18:24:02 freenas ugen0.1: <0x8086 XHCI root HUB> at usbus0 Oct 28 18:24:02 freenas uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Oct 28 18:24:02 freenas uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 Oct 28 18:24:02 freenas uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 Oct 28 18:24:02 freenas uhub1: 17 ports with 17 removable, self powered Oct 28 18:24:02 freenas uhub0: 2 ports with 2 removable, self powered Oct 28 18:24:02 freenas uhub2: 2 ports with 2 removable, self powered Oct 28 18:24:02 freenas ugen0.2: <vendor 0x0000 product 0x0001> at usbus0 Oct 28 18:24:02 freenas uhub3 on uhub1 Oct 28 18:24:02 freenas uhub3: <vendor 0x0000 product 0x0001, class 9/0, rev 2.00/0.00, addr 1> on usbus0 Oct 28 18:24:02 freenas ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 Oct 28 18:24:02 freenas uhub4 on uhub2 Oct 28 18:24:02 freenas uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.05, addr 2> on usbus2 Oct 28 18:24:02 freenas ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 Oct 28 18:24:02 freenas uhub5 on uhub0 Oct 28 18:24:02 freenas uhub5: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.05, addr 2> on usbus1 Oct 28 18:24:02 freenas uhub3: 4 ports with 3 removable, self powered Oct 28 18:24:02 freenas uhub5: 4 ports with 4 removable, self powered Oct 28 18:24:02 freenas uhub4: 6 ports with 6 removable, self powered Oct 28 18:24:02 freenas ugen0.3: <vendor 0x0557 product 0x2419> at usbus0 Oct 28 18:24:02 freenas ukbd0 on uhub3 Oct 28 18:24:02 freenas ukbd0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 Oct 28 18:24:02 freenas kbd0 at ukbd0 Oct 28 18:24:02 freenas ugen0.4: <Kingston DataTraveler 2.0> at usbus0 Oct 28 18:24:02 freenas umass0 on uhub1 Oct 28 18:24:02 freenas umass0: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 3> on usbus0 Oct 28 18:24:02 freenas umass0: SCSI over Bulk-Only; quirks = 0x8100 Oct 28 18:24:02 freenas umass0:7:0: Attached to scbus7 Oct 28 18:24:02 freenas ugen0.5: <Kingston DataTraveler 2.0> at usbus0 Oct 28 18:24:02 freenas umass1 on uhub1 Oct 28 18:24:02 freenas umass1: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 4> on usbus0 Oct 28 18:24:02 freenas umass1: SCSI over Bulk-Only; quirks = 0x8100 Oct 28 18:24:02 freenas umass1:8:1: Attached to scbus8 Oct 28 18:24:02 freenas ada0 at ahcich1 bus 0 scbus1 target 0 lun 0 Oct 28 18:24:02 freenas ada0: <WDC WD30EZRZ-00Z5HB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 18:24:02 freenas da0 at umass-sim0 bus 0 scbus7 target 0 lun 0 Oct 28 18:24:02 freenas ada0: Serial Number WD-WCC4N0XFJ22T Oct 28 18:24:02 freenas ada0: 600.000MB/s transfersda0: (SATA 3.x, UDMA6, PIO 8192bytes) Oct 28 18:24:02 freenas ada0: Command Queueing enabled Oct 28 18:24:02 freenas ada0: 2861588MB (5860533168 512 byte sectors) Oct 28 18:24:02 freenas syslog-ng[1726]: Error processing log message: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-2 SCSI device Oct 28 18:24:02 freenas ada1 at ahcich2 bus 0 scbus2 target 0 lun 0 Oct 28 18:24:02 freenas da0: Serial Number 6CF049E0FBE3BF11492F1E7E Oct 28 18:24:02 freenas da0: 40.000MB/s transfersada1: <WDC WD30EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 18:24:02 freenas ada1: Serial Number WD-WCC4E4ALNH0F Oct 28 18:24:02 freenas ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Oct 28 18:24:02 freenas ada1: Command Queueing enabled Oct 28 18:24:02 freenas ada1: 2861588MB (5860533168 512 byte sectors) Oct 28 18:24:02 freenas ada1: quirks=0x1<4K> Oct 28 18:24:02 freenas ada2 at ahcich3 bus 0 scbus3 target 0 lun 0 Oct 28 18:24:02 freenas da0: 15004MB (30728832 512 byte sectors) Oct 28 18:24:02 freenas da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> Oct 28 18:24:02 freenas da1 at umass-sim1 bus 1 scbus8 target 0 lun 0 Oct 28 18:24:02 freenas ada2: <WDC WD30EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 18:24:02 freenas da1: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SPC-2 SCSI device Oct 28 18:24:02 freenas da1: Serial Number 50E54951344CBF113946605E Oct 28 18:24:02 freenas da1: 40.000MB/s transfers Oct 28 18:24:02 freenas da1: 15004MB (30728832 512 byte sectors) Oct 28 18:24:02 freenas da1: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE> Oct 28 18:24:02 freenas ada2: Serial Number WD-WCC4E7HKVDKR Oct 28 18:24:02 freenas ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Oct 28 18:24:02 freenas ada2: Command Queueing enabled Oct 28 18:24:02 freenas ada2: 2861588MB (5860533168 512 byte sectors) Oct 28 18:24:02 freenas ada2: quirks=0x1<4K> Oct 28 18:24:02 freenas ada3 at ahcich4 bus 0 scbus4 target 0 lun 0 Oct 28 18:24:02 freenas ada3: <WDC WD30EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 18:24:02 freenas ada3: Serial Number WD-WCC4E7UF84DC Oct 28 18:24:02 freenas ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Oct 28 18:24:02 freenas ada3: Command Queueing enabled Oct 28 18:24:02 freenas ada3: 2861588MB (5860533168 512 byte sectors) Oct 28 18:24:02 freenas ada3: quirks=0x1<4K> Oct 28 18:24:02 freenas ada4 at ahcich5 bus 0 scbus5 target 0 lun 0 Oct 28 18:24:02 freenas ada4: <WDC WD30EZRX-00SPEB0 80.00A80> ACS-2 ATA SATA 3.x device Oct 28 18:24:02 freenas ada4: Serial Number WD-WCC4E5EJSL35 Oct 28 18:24:02 freenas ada4: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) Oct 28 18:24:02 freenas ada4: Command Queueing enabled Oct 28 18:24:02 freenas ada4: 2861588MB (5860533168 512 byte sectors) Oct 28 18:24:02 freenas ada4: quirks=0x1<4K> Oct 28 18:24:02 freenas random: unblocking device. Oct 28 18:24:02 freenas Trying to mount root from zfs:freenas-boot/ROOT/11.1-U6 []... Oct 28 18:24:02 freenas kernel: em0: link state changed to UP Oct 28 18:24:02 freenas kernel: em0: link state changed to UP Oct 28 18:24:02 freenas kernel: igb0: link state changed to UP Oct 28 18:24:02 freenas kernel: igb0: link state changed to UP Oct 28 18:24:02 freenas ipmi0: <IPMI System Interface> port 0xca2,0xca3 on acpi0 Oct 28 18:24:02 freenas ipmi0: KCS mode found at io 0xca2 on acpi Oct 28 18:24:02 freenas ipmi0: IPMI device rev. 1, firmware rev. 1.35, version 2.0 Oct 28 18:24:02 freenas ipmi0: Number of channels 2 Oct 28 18:24:02 freenas ipmi0: Attached watchdog Oct 28 18:24:02 freenas ichwd0: <Intel Lynx Point watchdog timer> at port 0x1830-0x1837,0x1860-0x187f on isa0 Oct 28 18:24:02 freenas ichwd0: ICH WDT present but disabled in BIOS or hardware Oct 28 18:24:02 freenas device_attach: ichwd0 attach returned 6 Oct 28 18:24:02 freenas GEOM_RAID5: Module loaded, version 1.3.20140711.62 (rev f91e28e40bf7) Oct 28 18:24:02 freenas GEOM_MIRROR: Device mirror/swap0 launched (2/2). Oct 28 18:24:02 freenas GEOM_MIRROR: Device mirror/swap1 launched (2/2). Oct 28 18:24:02 freenas GEOM_ELI: Device mirror/swap0.eli created. Oct 28 18:24:02 freenas GEOM_ELI: Encryption: AES-XTS 128 Oct 28 18:24:02 freenas GEOM_ELI: Crypto: hardware Oct 28 18:24:02 freenas GEOM_ELI: Device mirror/swap1.eli created. Oct 28 18:24:02 freenas GEOM_ELI: Encryption: AES-XTS 128 Oct 28 18:24:02 freenas GEOM_ELI: Crypto: hardware Oct 28 18:24:02 freenas hwpmc: SOFT/16/64/0x67<INT,USR,SYS,REA,WRI> TSC/1/64/0x20<REA> IAP/4/48/0x3ff<INT,USR,SYS,EDG,THR,REA,WRI,INV,QUA,PRC> IAF/3/48/0x67<INT,USR,SYS,REA,WRI> UCP/8/48/0x3f8<EDG,THR,REA,WRI,INV,QUA,PRC> UCF/1/48/0x60<REA,WRI> Oct 28 18:24:02 freenas kernel: igb0: link state changed to DOWN Oct 28 18:24:02 freenas kernel: igb0: link state changed to DOWN Oct 28 18:24:02 freenas kernel: igb0: link state changed to UP Oct 28 18:24:02 freenas kernel: igb0: link state changed to UP Oct 28 18:24:02 freenas ums0 on uhub3 Oct 28 18:24:02 freenas ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> on usbus0 Oct 28 18:24:02 freenas ums0: 3 buttons and [Z] coordinates ID=0 Oct 28 18:24:05 freenas ntpd[2133]: ntpd 4.2.8p10-a (1): Starting Oct 28 18:24:16 freenas root: /etc/rc: WARNING: failed precmd routine for minio Oct 28 18:24:26 freenas bridge0: Ethernet address: 02:50:1b:ea:48:00 Oct 28 18:24:26 freenas kernel: bridge0: link state changed to UP Oct 28 18:24:26 freenas kernel: bridge0: link state changed to UP Oct 28 18:24:26 freenas kernel: igb0: promiscuous mode enabled Oct 28 18:24:26 freenas epair0a: Ethernet address: 02:9a:50:00:05:0a Oct 28 18:24:26 freenas epair0b: Ethernet address: 02:9a:a0:00:06:0b Oct 28 18:24:26 freenas kernel: epair0a: link state changed to UP Oct 28 18:24:26 freenas kernel: epair0a: link state changed to UP Oct 28 18:24:26 freenas kernel: epair0b: link state changed to UP Oct 28 18:24:26 freenas kernel: epair0b: link state changed to UP Oct 28 18:24:26 freenas kernel: igb0: link state changed to DOWN Oct 28 18:24:26 freenas kernel: igb0: link state changed to DOWN Oct 28 18:24:26 freenas kernel: epair0a: promiscuous mode enabled Oct 28 18:24:30 freenas kernel: igb0: link state changed to UP Oct 28 18:24:30 freenas kernel: igb0: link state changed to UP