root@TrueNAS-Wide[~]# ./solnet-array-test-v2.sh sol.net disk array test v2 1) Use all disks (from camcontrol) 2) Use selected disks (from camcontrol|grep) 3) Specify disks 4) Show camcontrol list Option: 2 Enter grep match pattern (e.g. ST150176): SSDSC2KB96 Selected disks: da1 da2 da3 da4 da5 da6 da7 da8 at scbus3 target 0 lun 0 (pass2,da1) at scbus3 target 1 lun 0 (pass3,da2) at scbus3 target 2 lun 0 (pass4,da3) at scbus3 target 3 lun 0 (pass5,da4) at scbus3 target 4 lun 0 (pass6,da5) at scbus3 target 5 lun 0 (pass7,da6) at scbus3 target 6 lun 0 (pass8,da7) at scbus3 target 7 lun 0 (pass9,da8) Is this correct? (y/N): y Performing initial serial array read (baseline speeds) Tue Aug 23 01:25:28 EEST 2022 Tue Aug 23 01:43:30 EEST 2022 Completed: initial serial array read (baseline speeds) Array's average speed is 323.384 MB/sec per disk Disk Disk Size MB/sec %ofAvg ------- ---------- ------ ------ da1 915715MB 326 101 da2 915715MB 323 100 da3 915715MB 322 100 da4 915715MB 321 99 da5 915715MB 329 102 da6 915715MB 327 101 da7 915715MB 321 99 da8 915715MB 319 99 Performing initial parallel array read Tue Aug 23 01:43:30 EEST 2022 The disk da1 appears to be 915715 MB. Disk is reading at about 342 MB/sec This suggests that this pass may take around 45 minutes Serial Parall % of Disk Disk Size MB/sec MB/sec Serial ------- ---------- ------ ------ ------ da1 915715MB 326 56 17 --SLOW-- da2 915715MB 323 0 0 --SLOW-- da3 915715MB 322 0 0 --SLOW-- da4 915715MB 321 0 0 --SLOW-- da5 915715MB 329 0 0 --SLOW-- da6 915715MB 327 0 0 --SLOW-- da7 915715MB 321 0 0 --SLOW-- da8 915715MB 319 0 0 --SLOW-- Awaiting completion: initial parallel array read Tue Aug 23 01:55:01 EEST 2022 Completed: initial parallel array read Disk's average time is 139 seconds per disk Disk Bytes Transferred Seconds %ofAvg ------- ----------------- ------- ------ da1 53687091200 150 108 --SLOW-- da2 53687091200 149 107 --SLOW-- da3 53687091200 150 108 --SLOW-- da4 53687091200 150 108 --SLOW-- da5 53687091200 105 75 ++FAST++ da6 53687091200 105 76 ++FAST++ da7 53687091200 150 108 --SLOW-- da8 53687091200 150 108 --SLOW-- Performing initial parallel seek-stress array read Tue Aug 23 01:55:01 EEST 2022 The disk da1 appears to be 915715 MB. Disk is reading at about 381 MB/sec This suggests that this pass may take around 40 minutes Serial Parall % of Disk Disk Size MB/sec MB/sec Serial ------- ---------- ------ ------ ------ da1 915715MB 326 381 117 da2 915715MB 323 379 117 da3 915715MB 322 374 116 da4 915715MB 321 353 110 da5 915715MB 329 0 0 da6 915715MB 327 0 0 da7 915715MB 321 0 0 da8 915715MB 319 0 0 Awaiting completion: initial parallel seek-stress array read Tue Aug 23 02:11:32 EEST 2022 Completed: initial parallel seek-stress array read Disk's average time is 297 seconds per disk Disk Bytes Transferred Seconds %ofAvg ------- ----------------- ------- ------ da1 53687091200 337 113 --SLOW-- da2 53687091200 312 105 da3 53687091200 349 117 --SLOW-- da4 53687091200 383 129 --SLOW-- da5 53687091200 157 53 ++FAST++ da6 53687091200 156 53 ++FAST++ da7 53687091200 343 115 --SLOW-- da8 53687091200 340 115 --SLOW-- root@TrueNAS-Wide[~]# smartctl -a /dev/da1 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs Device Model: INTEL SSDSC2KB960G8 Serial Number: PHYF1511038L960CGN LU WWN Device Id: 5 5cd2e4 15523bfc3 Firmware Version: XCV10132 User Capacity: 960,197,124,096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 23 02:26:00 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1574 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 9 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2379 (11 65535) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 075 071 000 Old_age Always - 25 (Min/Max 23/29) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 9 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 25 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 114420 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 30 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 74 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 94393 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2379 (11 65535) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 114420 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 327126 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 142909 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@TrueNAS-Wide[~]# smartctl -a /dev/da2 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs Device Model: INTEL SSDSC2KB960G8 Serial Number: PHYF1511032Q960CGN LU WWN Device Id: 5 5cd2e4 15523befb Firmware Version: XCV10132 User Capacity: 960,197,124,096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 23 02:26:41 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1574 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 11 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 9 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2350 (11 65535) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 073 069 000 Old_age Always - 27 (Min/Max 24/32) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 9 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 27 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 114412 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 30 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 74 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 94394 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2350 (11 65535) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 114412 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 327101 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 143052 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@TrueNAS-Wide[~]# smartctl -a /dev/da3 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs Device Model: INTEL SSDSC2KB960G8 Serial Number: BTYF9174056K960CGN LU WWN Device Id: 5 5cd2e4 150a119bb Firmware Version: XCV10110 User Capacity: 960,197,124,096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 23 02:26:53 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 19624 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 29 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 26 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2347 (29 65535) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 078 074 000 Old_age Always - 22 (Min/Max 20/27) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 26 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 22 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 4078131 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 2652 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 53 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 1177363 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 098 098 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2347 (29 65535) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 4078131 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 4783941 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 9696266 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@TrueNAS-Wide[~]# smartctl -a /dev/da4 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs Device Model: INTEL SSDSC2KB960G8 Serial Number: BTYF919504SE960CGN LU WWN Device Id: 5 5cd2e4 150a4c19e Firmware Version: XCV10110 User Capacity: 960,197,124,096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 23 02:27:03 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 19602 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 26 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 23 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2462 (26 65535) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 078 074 000 Old_age Always - 22 (Min/Max 19/26) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 23 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 22 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 3766279 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 2232 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 73 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 1176075 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 098 098 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2462 (26 65535) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 3766279 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 10550565 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 8176933 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@TrueNAS-Wide[~]# smartctl -a /dev/da5 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs Device Model: INTEL SSDSC2KB960G8 Serial Number: BTYF207503FH960CGN LU WWN Device Id: 5 5cd2e4 155830942 Firmware Version: XCV10132 User Capacity: 960,197,124,096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 23 02:27:05 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 267 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 6 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2419 (6 16068) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 075 072 000 Old_age Always - 25 (Min/Max 23/28) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 6 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 25 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 7 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 0 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 99 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 16044 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2419 (6 16068) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 7 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 12800 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 1339 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@TrueNAS-Wide[~]# smartctl -a /dev/da6 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs Device Model: INTEL SSDSC2KB960G8 Serial Number: BTYF1411012J960CGN LU WWN Device Id: 5 5cd2e4 154ada5b9 Firmware Version: XCV10132 User Capacity: 960,197,124,096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 23 02:27:17 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 267 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 6 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2410 (6 16068) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 072 070 000 Old_age Always - 28 (Min/Max 24/30) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 6 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 28 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 7 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 0 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 99 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 16044 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2410 (6 16068) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 7 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 12800 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 1334 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@TrueNAS-Wide[~]# smartctl -a /dev/da7 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs Device Model: INTEL SSDSC2KB960G8 Serial Number: PHYF125105YV960CGN LU WWN Device Id: 5 5cd2e4 153609605 Firmware Version: XCV10132 User Capacity: 960,197,124,096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 23 02:27:35 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1498 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 7 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2625 (10 65535) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 077 072 000 Old_age Always - 23 (Min/Max 21/28) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 7 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 23 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 114494 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 30 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 52 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 89857 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2625 (10 65535) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 114494 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 127009 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 140081 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. root@TrueNAS-Wide[~]# smartctl -a /dev/da8 smartctl 7.2 2020-12-30 r5155 [FreeBSD 12.2-RELEASE-p14 amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Intel S4510/S4610/S4500/S4600 Series SSDs Device Model: INTEL SSDSC2KB960G8 Serial Number: PHYF1251055C960CGN LU WWN Device Id: 5 5cd2e4 15362589e Firmware Version: XCV10132 User Capacity: 960,197,124,096 bytes [960 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 23 02:27:49 2022 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1498 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 7 175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2422 (10 65535) 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error_Count 0x0033 100 100 090 Pre-fail Always - 0 187 Uncorrectable_Error_Cnt 0x0032 100 100 000 Old_age Always - 0 190 Drive_Temperature 0x0022 077 072 000 Old_age Always - 23 (Min/Max 20/28) 192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 7 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 23 197 Pending_Sector_Count 0x0012 100 100 000 Old_age Always - 0 199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 114494 226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 30 227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 52 228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 89855 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 234 Thermal_Throttle_Status 0x0032 100 100 000 Old_age Always - 0/0 235 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 2422 (10 65535) 241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 114494 242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 126986 243 NAND_Writes_32MiB 0x0032 100 100 000 Old_age Always - 140728 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.