eval: {FREENAS_SQLITE_CMD}: not found
+--------------------------------------------------------------------------------+
+                         SMARTD Boot Status @1535561583                         +
+--------------------------------------------------------------------------------+
SMARTD will 
debug finished in 0 seconds for SMARTD Boot Status


+--------------------------------------------------------------------------------+
+                         SMARTD Run Status @1535561583                          +
+--------------------------------------------------------------------------------+
smartd_daemon is running as pid 3961.
debug finished in 0 seconds for SMARTD Run Status


+--------------------------------------------------------------------------------+
+                        Scheduled SMART Jobs @1535561583                        +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Scheduled SMART Jobs


+--------------------------------------------------------------------------------+
+                    Disks being checked by SMART @1535561583                    +
+--------------------------------------------------------------------------------+
debug finished in 0 seconds for Disks being checked by SMART


+--------------------------------------------------------------------------------+
+                            smartctl -a @1535561583                             +
+--------------------------------------------------------------------------------+
/dev/cd0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     HL-DT-ST DVD-RAM GSA-H60L
Serial Number:    K117C512340
Firmware Version: E904
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a
Local Time is:    Wed Aug 29 12:53:03 2018 EDT
SMART support is: Unavailable - Packet Interface Devices [this device: CD/DVD] don't support ATA SMART

A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
/dev/ada2
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     FB160C4081
Serial Number:    9RX5P4Y2
Firmware Version: HPF0
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA/ATAPI-7 T13/1532D revision 4a
Local Time is:    Wed Aug 29 12:53:03 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  433) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   253   006    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0002   097   097   000    Old_age   Always       -       0
  4 Start_Stop_Count        0x0033   100   100   020    Pre-fail  Always       -       238
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       238321053
  9 Power_On_Hours          0x0032   011   011   000    Old_age   Always       -       78513
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0033   100   100   020    Pre-fail  Always       -       238
184 End-to-End_Error        0x0032   100   253   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x003a   100   100   051    Old_age   Always       -       0
189 High_Fly_Writes         0x0022   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x001a   063   050   000    Old_age   Always       -       37 (Min/Max 37/39)
194 Temperature_Celsius     0x0000   037   050   000    Old_age   Offline      -       37 (0 21 0 0 0)
195 Hardware_ECC_Recovered  0x0032   061   057   000    Old_age   Always       -       98372901
197 Current_Pending_Sector  0x0000   100   100   000    Old_age   Offline      -       2
198 Offline_Uncorrectable   0x0000   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0000   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada1
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda LP
Device Model:     ST31000520AS
Serial Number:    9VX0ZPY4
LU WWN Device Id: 5 000c50 0272b021c
Firmware Version: CC32
User Capacity:    1,000,204,886,016 bytes [1.00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5900 rpm
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Wed Aug 29 12:53:04 2018 EDT

==> WARNING: A firmware update for this drive may be available,
see the following Seagate web pages:
http://knowledge.seagate.com/articles/en_US/FAQ/207931en
http://knowledge.seagate.com/articles/en_US/FAQ/213915en

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  633) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 226) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x103f)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   091   006    Pre-fail  Always       -       141846660
  3 Spin_Up_Time            0x0003   095   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       254
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   072   060   030    Pre-fail  Always       -       15015273
  9 Power_On_Hours          0x0032   030   030   000    Old_age   Always       -       61686
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       127
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       1094
188 Command_Timeout         0x0032   100   086   000    Old_age   Always       -       1400180769095
189 High_Fly_Writes         0x003a   095   095   000    Old_age   Always       -       5
190 Airflow_Temperature_Cel 0x0022   067   059   045    Old_age   Always       -       33 (Min/Max 30/33)
194 Temperature_Celsius     0x0022   033   041   000    Old_age   Always       -       33 (0 20 0 0 0)
195 Hardware_ECC_Recovered  0x001a   039   031   000    Old_age   Always       -       141846660
197 Current_Pending_Sector  0x0012   100   099   000    Old_age   Always       -       2
198 Offline_Uncorrectable   0x0010   100   099   000    Old_age   Offline      -       2
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       61913 (159 186 0)
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       3349522447
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       1084941604

SMART Error Log Version: 1
ATA Error Count: 1032 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1032 occurred at disk power-on lifetime: 60905 hours (2537 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 3c 4c 00 00  Error: UNC at LBA = 0x00004c3c = 19516

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 d8 10 2f 4c 00 e0 00      01:03:07.101  READ VERIFY SECTOR(S) EXT
  42 d8 10 1f 4c 00 e0 00      01:03:07.032  READ VERIFY SECTOR(S) EXT
  25 d8 01 00 00 00 e0 00      01:03:06.938  READ DMA EXT
  42 d8 10 af 4b 00 e0 00      01:03:03.209  READ VERIFY SECTOR(S) EXT
  42 d8 10 9f 4b 00 e0 00      01:03:03.079  READ VERIFY SECTOR(S) EXT

Error 1031 occurred at disk power-on lifetime: 60905 hours (2537 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b7 4b 00 00  Error: UNC at LBA = 0x00004bb7 = 19383

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 d8 10 af 4b 00 e0 00      01:03:03.209  READ VERIFY SECTOR(S) EXT
  42 d8 10 9f 4b 00 e0 00      01:03:03.079  READ VERIFY SECTOR(S) EXT
  25 d8 01 00 00 00 e0 00      01:03:03.078  READ DMA EXT
  42 d8 10 4f 4b 00 e0 00      01:03:03.066  READ VERIFY SECTOR(S) EXT
  25 d8 01 00 00 00 e0 00      01:03:03.022  READ DMA EXT

Error 1030 occurred at disk power-on lifetime: 60905 hours (2537 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 43 4b 00 00  Error: UNC at LBA = 0x00004b43 = 19267

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 d8 10 3f 4b 00 e0 00      01:02:59.278  READ VERIFY SECTOR(S) EXT
  42 d8 20 1f 4c 00 e0 00      01:02:55.622  READ VERIFY SECTOR(S) EXT
  42 d8 20 ff 4b 00 e0 00      01:02:55.615  READ VERIFY SECTOR(S) EXT
  25 d8 01 00 00 00 e0 00      01:02:55.528  READ DMA EXT
  42 d8 20 9f 4b 00 e0 00      01:02:51.858  READ VERIFY SECTOR(S) EXT

Error 1029 occurred at disk power-on lifetime: 60905 hours (2537 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 3c 4c 00 00  Error: UNC at LBA = 0x00004c3c = 19516

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 d8 20 1f 4c 00 e0 00      01:02:55.622  READ VERIFY SECTOR(S) EXT
  42 d8 20 ff 4b 00 e0 00      01:02:55.615  READ VERIFY SECTOR(S) EXT
  25 d8 01 00 00 00 e0 00      01:02:55.528  READ DMA EXT
  42 d8 20 9f 4b 00 e0 00      01:02:51.858  READ VERIFY SECTOR(S) EXT
  42 d8 20 7f 4b 00 e0 00      01:02:51.848  READ VERIFY SECTOR(S) EXT

Error 1028 occurred at disk power-on lifetime: 60905 hours (2537 days + 17 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 b7 4b 00 00  Error: UNC at LBA = 0x00004bb7 = 19383

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  42 d8 20 9f 4b 00 e0 00      01:02:51.858  READ VERIFY SECTOR(S) EXT
  42 d8 20 7f 4b 00 e0 00      01:02:51.848  READ VERIFY SECTOR(S) EXT
  25 d8 01 00 00 00 e0 00      01:02:51.761  READ DMA EXT
  42 d8 20 5f 4b 00 e0 00      01:02:51.640  READ VERIFY SECTOR(S) EXT
  25 d8 01 00 00 00 e0 00      01:02:51.596  READ DMA EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

/dev/ada0
smartctl 6.6 2017-11-05 r4594 [FreeBSD 11.1-STABLE amd64] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     FB160C4081
Serial Number:    9RX5P50Y
Firmware Version: HPF0
User Capacity:    160,041,885,696 bytes [160 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA/ATAPI-7 T13/1532D revision 4a
Local Time is:    Wed Aug 29 12:53:04 2018 EDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(  433) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  54) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   100   253   006    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0002   097   097   000    Old_age   Always       -       0
  4 Start_Stop_Count        0x0033   100   100   020    Pre-fail  Always       -       250
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   088   060   030    Pre-fail  Always       -       804245363
  9 Power_On_Hours          0x0032   011   011   000    Old_age   Always       -       78516
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0033   100   100   020    Pre-fail  Always       -       241
184 End-to-End_Error        0x0032   100   253   000    Old_age   Always       -       0
187 Reported_Uncorrect      0x003a   099   099   051    Old_age   Always       -       1
189 High_Fly_Writes         0x0022   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x001a   064   053   000    Old_age   Always       -       36 (Min/Max 36/38)
194 Temperature_Celsius     0x0000   036   047   000    Old_age   Offline      -       36 (0 20 0 0 0)
195 Hardware_ECC_Recovered  0x0032   069   061   000    Old_age   Always       -       123011424
197 Current_Pending_Sector  0x0000   100   100   000    Old_age   Offline      -       0
198 Offline_Uncorrectable   0x0000   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0000   200   200   000    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 1
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 1 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 00 00 00 e0  Error: UNC at LBA = 0x00000000 = 0

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 ff 01 00 00 00 e0 00      00:17:16.704  READ DMA EXT
  c6 ff 10 00 00 00 e0 00      00:17:16.703  SET MULTIPLE MODE
  ec ff 00 00 00 00 e0 00      00:17:16.702  IDENTIFY DEVICE
  c8 ff 01 00 00 00 e0 00      00:17:17.898  READ DMA
  c8 ff 01 00 00 00 e0 00      00:17:17.457  READ DMA

SMART Self-test log structure revision number 1

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

debug finished in 1 seconds for smartctl -a


