+--------------------------------------------------------------------------------+
+                                     SMART                                      +
+--------------------------------------------------------------------------------+
/dev/ada0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     InnoLite SATADOM D150QV
Serial Number:    20140915AA9451122068
Firmware Version: 120319
User Capacity:    32,017,047,552 bytes [32.0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS (minor revision not indicated)
SATA Version is:  SATA 2.6, 3.0 Gb/s
Local Time is:    Mon Jan 18 17:58:29 2016 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Unavailable
Wt Cache Reorder: Unavailable

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Total time to complete Offline 
data collection: 		(   30) seconds.
Offline data collection
capabilities: 			 (0x00) 	Offline data collection not supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x00)	Error logging NOT supported.
					No General Purpose Logging support.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     PO-R--   100   100   050    -    16777215
  2 Throughput_Performance  P-S---   100   100   050    -    0
  3 Spin_Up_Time            POS---   100   100   050    -    0
  5 Reallocated_Sector_Ct   PO--C-   100   100   050    -    0
  7 Unknown_SSD_Attribute   PO-R--   100   100   050    -    0
  8 Unknown_SSD_Attribute   P-S---   100   100   050    -    0
  9 Power_On_Hours          -O--C-   100   100   000    -    8629
 10 Unknown_SSD_Attribute   PO--C-   100   100   050    -    0
 12 Power_Cycle_Count       -O--C-   100   100   000    -    26
168 Unknown_Attribute       -O--C-   100   100   000    -    0
175 Program_Fail_Count_Chip PO----   100   100   010    -    0
192 Power-Off_Retract_Count -O--C-   100   100   000    -    0
194 Temperature_Celsius     -O---K   000   100   000    -    0 (Min/Max 0/100)
197 Current_Pending_Sector  -O--C-   100   100   000    -    0
240 Unknown_SSD_Attribute   PO--C-   100   100   050    -    0
170 Unknown_Attribute       PO----   100   100   010    -    524288
173 Unknown_Attribute       -O--C-   100   100   000    -    7405610
229 Unknown_Attribute       -O----   100   100   000    -    727108061228
236 Unknown_Attribute       -O----   100   100   000    -    0
235 Unknown_Attribute       -O----   100   000   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

Read SMART Log Directory failed: Input/output error

General Purpose Log Directory Version 1
Address    Access  R/W   Size  Description
0x00       GPL     R/O      1  Log Directory
0x10       GPL     R/O      1  NCQ Command Error log

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log not supported

SMART Extended Self-test Log (GP Log 0x07) not supported

SMART Self-test Log not supported

Selective Self-tests/Logging not supported

SCT Commands not supported

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11) not supported

/dev/da17
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f04590c60
Serial number:        WCC1P1065322
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:29 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     23 C
Drive Trip Temperature:        69 C

Manufactured in week 11 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  24
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       3250        0         0      3250          0      14114.614           0
write:     10272        0         0     10272          0      19999.889           0

Non-medium error count:       66

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:28 [517708 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f04590c62
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 20
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f04590c63
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 20
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da16
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f045a9474
Serial number:        WCC1P1218134
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:29 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     24 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  25
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       3725        0         0      3725          0      14102.468           0
write:      9538        0         0      9538          0      19999.817           0

Non-medium error count:       40

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:18 [517698 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f045a9476
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 19
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f045a9477
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 19
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da15
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f042fde5c
Serial number:        WCC1P1236054
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:30 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     24 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  10
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  50
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       2466        0         0      2466          0      14093.505           0
write:      9854        0         0      9854          0      19566.581           0

Non-medium error count:       55

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:23 [517703 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: loss of dword synchronization
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fde5e
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 18
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fde5f
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 18
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da14
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f042fde2c
Serial number:        WCC1P1218031
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:30 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     22 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  25
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       1912        0         0      1912          0      14110.691           0
write:     12393        0         0     12393          0      19999.054           0

Non-medium error count:       47

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:28 [517708 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fde2e
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 17
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fde2f
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 17
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da13
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f042fdfc4
Serial number:        WCC1P1237124
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:31 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     25 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  24
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       1580        0         0      1580          0      14051.826           0
write:      6197        0         0      6197          0      19669.677           0

Non-medium error count:       40

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:22 [517702 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fdfc6
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 16
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fdfc7
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 16
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da12
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f045a9618
Serial number:        WCC1P1235451
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:31 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     25 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  25
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       2297        0         0      2297          0      14111.579           0
write:      2972        0         0      2972          0      19552.320           0

Non-medium error count:       43

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:38 [517718 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f045a961a
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 15
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f045a961b
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 15
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da11
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f04054180
Serial number:        WCC1P1237267
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:32 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     23 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  55
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       2131        0         0      2131          0      14128.521           0
write:      4027        0         0      4027          0      19552.205           0

Non-medium error count:       56

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:30 [517710 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f04054182
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 14
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f04054183
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 14
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da10
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               STEC
Product:              S841E400M2
Revision:             E4R5
Compliance:           SPC-4
User Capacity:        400,088,457,216 bytes [400 GB]
Logical block size:   512 bytes
LU is resource provisioned, LBPRZ=0
Rotation Rate:        Solid State Device
Form Factor:          2.5 inches
Logical Unit id:      0x5000a720300a61cd
Serial number:        STM0001A0523
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:32 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Percentage used endurance indicator: 0%
Current Drive Temperature:     33 C
Drive Trip Temperature:        75 C

Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 195906583790616576
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:    8024286    95592   8024286   8119878    8119878         35.556           0
write:         0        0         0         0          0          8.163           0
verify:        0        2         0         2          2          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 8643:33 [518613 minutes]
    Number of background scans performed: 38,  scan progress: 6.64%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000a72a300a61cd
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 13
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 5
    Phy reset problem = 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000a72b300a61cd
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 13
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 3
    Phy reset problem = 0

/dev/da9
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               STEC
Product:              S842E200M2
Revision:             E4R3
Compliance:           SPC-4
User Capacity:        200,049,647,616 bytes [200 GB]
Logical block size:   512 bytes
LU is resource provisioned, LBPRZ=0
Rotation Rate:        Solid State Device
Form Factor:          2.5 inches
Logical Unit id:      0x5000a7203009dbd3
Serial number:        STM000197B70
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:32 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Percentage used endurance indicator: 0%
Current Drive Temperature:     34 C
Drive Trip Temperature:        75 C

Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   72220169        0  72220169  72220169   72220169        356.655           0
write:         0        0         0         0          0          7.615           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8643:33 [518613 minutes]
    Number of background scans performed: 189,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000a72a3009dbd3
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 12
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 3
    Phy reset problem = 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000a72b3009dbd3
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 12
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 3
    Phy reset problem = 0

/dev/da8
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f04590c60
Serial number:        WCC1P1065322
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:32 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     23 C
Drive Trip Temperature:        69 C

Manufactured in week 11 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  24
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       3250        0         0      3250          0      14114.614           0
write:     10272        0         0     10272          0      19999.893           0

Non-medium error count:       66

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:28 [517708 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f04590c62
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 20
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f04590c63
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 20
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da7
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f045a9474
Serial number:        WCC1P1218134
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:33 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     24 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  25
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       3725        0         0      3725          0      14102.468           0
write:      9538        0         0      9538          0      19999.821           0

Non-medium error count:       40

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:18 [517698 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f045a9476
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 19
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f045a9477
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 19
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da6
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f042fde5c
Serial number:        WCC1P1236054
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:33 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     24 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  10
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  50
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       2466        0         0      2466          0      14093.505           0
write:      9854        0         0      9854          0      19566.584           0

Non-medium error count:       55

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:23 [517703 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: loss of dword synchronization
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fde5e
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 18
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: unknown
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fde5f
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 18
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da5
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f042fde2c
Serial number:        WCC1P1218031
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:33 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     23 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  25
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       1912        0         0      1912          0      14110.691           0
write:     12393        0         0     12393          0      19999.056           0

Non-medium error count:       47

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:28 [517708 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fde2e
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 17
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fde2f
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 17
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da4
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f042fdfc4
Serial number:        WCC1P1237124
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:33 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     25 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  24
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       1580        0         0      1580          0      14051.826           0
write:      6197        0         0      6197          0      19669.678           0

Non-medium error count:       40

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:22 [517702 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fdfc6
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 16
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f042fdfc7
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 16
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da3
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f045a9618
Serial number:        WCC1P1235451
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:34 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     25 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  25
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       2297        0         0      2297          0      14111.579           0
write:      2972        0         0      2972          0      19552.320           0

Non-medium error count:       43

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:38 [517718 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f045a961a
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 15
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f045a961b
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 15
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da2
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               WD
Product:              WD1001FYYG-01SL3
Revision:             VR07
Compliance:           SPC-4
User Capacity:        1,000,204,886,016 bytes [1.00 TB]
Logical block size:   512 bytes
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x50000c0f04054180
Serial number:        WCC1P1237267
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:34 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Disabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Current Drive Temperature:     23 C
Drive Trip Temperature:        69 C

Manufactured in week 17 of year 2014
Specified cycle count over device lifetime:  1048576
Accumulated start-stop cycles:  9
Specified load-unload count over device lifetime:  1114112
Accumulated load-unload cycles:  55
Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:       2131        0         0      2131          0      14128.521           0
write:      4027        0         0      4027          0      19552.205           0

Non-medium error count:       56

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8628:31 [517711 minutes]
    Number of background scans performed: 0,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f04054182
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 14
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x50000c0f04054183
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 14
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 0
    Phy reset problem = 0
    Phy event descriptors:
     Transmitted SSP frame error count: 0
     Received SSP frame error count: 0

/dev/da1
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               STEC
Product:              S841E400M2
Revision:             E4R5
Compliance:           SPC-4
User Capacity:        400,088,457,216 bytes [400 GB]
Logical block size:   512 bytes
LU is resource provisioned, LBPRZ=0
Rotation Rate:        Solid State Device
Form Factor:          2.5 inches
Logical Unit id:      0x5000a720300a61cd
Serial number:        STM0001A0523
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:34 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Percentage used endurance indicator: 0%
Current Drive Temperature:     33 C
Drive Trip Temperature:        75 C

Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 195906583790616576
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0
  Blocks sent to initiator = 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:    8024286    95592   8024286   8119878    8119878         35.556           0
write:         0        0         0         0          0          8.163           0
verify:        0        2         0         2          2          0.000           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: scan is active
    Accumulated power on time, hours:minutes 8643:33 [518613 minutes]
    Number of background scans performed: 38,  scan progress: 6.64%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000a72a300a61cd
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 13
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 5
    Phy reset problem = 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000a72b300a61cd
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 13
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 3
    Phy reset problem = 0

/dev/da0
smartctl 6.3 2014-07-26 r3976 [FreeBSD 9.3-RELEASE-p28 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               STEC
Product:              S842E200M2
Revision:             E4R3
Compliance:           SPC-4
User Capacity:        200,049,647,616 bytes [200 GB]
Logical block size:   512 bytes
LU is resource provisioned, LBPRZ=0
Rotation Rate:        Solid State Device
Form Factor:          2.5 inches
Logical Unit id:      0x5000a7203009dbd3
Serial number:        STM000197B70
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Mon Jan 18 17:58:34 2016 IST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK

Percentage used endurance indicator: 0%
Current Drive Temperature:     34 C
Drive Trip Temperature:        75 C

Elements in grown defect list: 0

Error counter log:
           Errors Corrected by           Total   Correction     Gigabytes    Total
               ECC          rereads/    errors   algorithm      processed    uncorrected
           fast | delayed   rewrites  corrected  invocations   [10^9 bytes]  errors
read:   72220169        0  72220169  72220169   72220169        356.655           0
write:         0        0         0         0          0          7.615           0

Non-medium error count:        0

No self-tests have been logged

Background scan results log
  Status: no scans active
    Accumulated power on time, hours:minutes 8643:33 [518613 minutes]
    Number of background scans performed: 189,  scan progress: 0.00%
    Number of background medium scans performed: 0

Protocol Specific port log page for SAS SSP
relative target port id = 1
  generation code = 0
  number of phys = 1
  phy identifier = 0
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000a72a3009dbd3
    attached SAS address = 0x50030480012ccd3f
    attached phy identifier = 12
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 3
    Phy reset problem = 0
relative target port id = 2
  generation code = 0
  number of phys = 1
  phy identifier = 1
    attached device type: expander device
    attached reason: SMP phy control function
    reason: unknown
    negotiated logical link rate: phy enabled; 6 Gbps
    attached initiator port: ssp=0 stp=0 smp=0
    attached target port: ssp=0 stp=0 smp=1
    SAS address = 0x5000a72b3009dbd3
    attached SAS address = 0x50030480012ccdbf
    attached phy identifier = 12
    Invalid DWORD count = 0
    Running disparity error count = 0
    Loss of DWORD synchronization = 3
    Phy reset problem = 0



